you got me googling how to do this now... i should be in bed resting for all the snow shoveling tomorrow but nooooooooo Mr rogers has to post this info tonightYeah I was thinking something like that would be more consistent
you got me googling how to do this now... i should be in bed resting for all the snow shoveling tomorrow but nooooooooo Mr rogers has to post this info tonightYeah I was thinking something like that would be more consistent
You had me at Static. It's been a joy watching this team develop this hilt over the past few years. From Fx to Static, you can't go wrong.Might be a good time to remind/ mention that we fully intend to do a static Hero perfect for display and are finally ready given….
We now have all the ingredients confirmed to include in the kit to replicate the perfect cave hero which is something I’ve been holding out for.
-Ultra Refined hilt geometry based on latest reference.
-Confirmed donor board replicas for the reveal.
- confirmed electronics assembly in the box
- And now confirmed Luke’s tools for activation.
(Which I’m hoping to dub the Energy Matrix Dampener)
im hoarding statics when announcedYou had me at Static. It's been a joy watching this team develop this hilt over the past few years. From Fx to Static, you can't go wrong.
Don't be a hoarder!im hoarding statics when announced
Oh just dandy… 80mph winds… 18” of snow on the way.. fun stuffWell Danny I just got snow down here in Atlanta so … ah… everything’s fine here, situation normal. How are you?
Blizzard conditions here in MA, too! Power keeps flickering - here's hoping it stays up...Oh just dandy… 80mph winds… 18” of snow on the way.. fun stuff
View attachment 1539656
Took a second look at this today - looks like my early attempts at making a better surface to glue to… rough it up with a dremelWorking on my one and only weathering commission (for a special board member we all love and appreciate) with one of the MOM Gen2’s.
Hope you enjoy the translated marking hereView attachment 1579959
The one *great* Yuma reference I know of is the high res chin shot… but of course that’s the other side anyway high res or not. I can’t tell from film stills… but I do firmly believe the lever was severed somehow and marred both the bottom of the lever and the face of the button section. If you look at the *top* of the buttons in the references- I believe assertions can be made that it was marred at the same time with the same tool in a mirrored pattern.Do we know for sure if the Yuma box was machined out of one piece, or if the lever was a separate piece? That weird possible hole behind the front button could be some sort of pin hole or remnant if the lever was separate.
What kind of tools / machine was needed back in the 80s to make such small triangle holes in the aluminum plate? Isn't it just too much effort to build from scratch what essentially is auto-reverse indicator, instead of taking one from some tape player? Or compared to just drilling 2 simple round holes , putting 2 3mm leds in them and be done with it?And bets are open if the arrows are found parts or fabricated still.
What are the dimensions of your control box? I had to shave the walls on mine (7chambers) from the inside so the board fits properly that If I make such a deep scar on the outside it will make a hole for sure.