hoboinblue
New Member
Hey if you are still making these i would quite like to get one, let me know if thats at all possible.
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Metal Blade Runner Blaster Based on AndersEFP Design
- Thread starter DaveChaos
- Start date
hoboinblue
New Member
If you are still making these id love to buy one aswell.Production has started for the Metal Blade Runner Blaster based on AndersEFP designs, I have a build log of this project HERE that is now almost two years in the making.
This run will be made in batches of 5 at a time due to the work involved and my own sanity.
The run(s) will be for a DIY Kit made of Pewter and Resin cast of Anders design of Deckard Blade Runner Blaster. I encourage you to have a look at the build log to see how this blaster kit differs from other available kits and the changes Anders has made for this project that differ from his files that are available on Thingiverse
Finished blaster (not been blued)
View attachment 1693774
View attachment 1693775
Kit Images
View attachment 1693769View attachment 1693771View attachment 1693765
View attachment 1693766View attachment 1693767View attachment 1693768
The blaster in below image is the final result, its has had a quick spit and polish and is destined to Anders himself
View attachment 1684762
The main parts are cast Pewter they will come in raw form out of the mould, I will do some basic clean up, I will also drill and tap the appropriate holes for the screws but not all holes! All the Black parts are cast Resin that will need drilling and tapping. This includes a resin cast Cylinder, I know a lot of you want a metal Cylinder but its just not possible for me to make one in metal. I hope this decision reflects in the price of the kit. The Barrel will be Aluminium. Also included are the Amber grips and x5 44. Special rounds. The rounds will look real with un-struck primers! They are however 100% inert. There will be a small hole drilled in the side of each round, once in the Cylinder you wont see them. Electronics for the mag and green side lights are also supplied. All bolts/screws are included.
View attachment 1577045View attachment 1693772View attachment 1693773
The kit price is £400, shipping will be an additional cost.
Payment will be at point of contact, no pre-orders. I will only contact you if I have a kit in hand ready to go or when you are next on the list! (or I need extra info. eg parts only orders)
If when contacted you are unable to commit you can pay a £50 deposit to hold you space in the queue. Your deposit will hold your place for 2 months. If the full amount is not paid within in this time, you will be refunded and dropped to the bottom of the queue.
If I don't hear from you when first contacted, in 5 days the space will go to the next person in line and you will drop to the end of the queue.
Optional extra is a pair of wireless Green LED's for the site rod. They are an extra £3.50 if you want one.
View attachment 1796723View attachment 1796725
There is an incredibly detailed build log by wayouteast here >> Metal PKD blaster kit from TipTop Workshop / Anders Pedersen - build log
View attachment 1706541
Blaster stand by Akwalek available here >> Unlimited Run - Blade Runner Blaster Illuminated Display Stand
Interest List.
MandoJedi CONTACTED PAID SHIPPED userd1402 CONTACTED PAID SHIPPED pnag CONTACTED PAID SHIPPED Greenkenzie CONTACTED PAID SHIPPED DarthWilder CONTACTED PAID SHIPPED Lovecrafty CONTACTED PAID SHIPPED Hirohawa (x2) CONTACTED PAID SHIPPED Fett_Ish - PARTS CONTACTED PAID SHIPPED Davidishida CONTACTED PAID SHIPPED seekerofgiants CONTACTED PAID SHIPPED BlindVoyeur CONTACTED PAID SHIPPED ObscureReferenc CONTACTED PAID SHIPPED gizmo CONTACTED PAID SHIPPED tennantlim - PARTS CONTACTED PAID SHIPPED Paul FSebastian CONTACTED PAID SHIPPED funboy1013xx CONTACTED PAID SHIPPED AliKarimi CONTACTED PAID SHIPPED Bishop6 CONTACTED PAID SHIPPED Ryan Clinton CONTACTED PAID SHIPPED sideous CONTACTED PAID SHIPPED ryee30 CONTACTED PAID SHIPPED shpider CONTACTED PAID SHIPPED undeadkennedy CONTACTED DEPOSIT PAID JetSetWilly CONTACTED PAID SHIPPED LoganFord CONTACTED
PAID
SHIPPED GeneralurkoDavid3Chimer4 CONTACTED PAID SHIPPED Johnny3072 CONTACTED DEPOSIT PAID anthonbrouneus CONTACTED DEPOSIT PAID DamnYankee123 CONTACTED PAID SHIPPED TreeMunky CONTACTED PAID SHIPPED Robb Crafer CONTACTED PAID SHIPPED Jedifather CONTACTED DEPOSIT PAID CabletonPicasoX CONTACTED PAID SHIPPED dcast CONTACTED PAID SHIPPED Spikeyfied CONTACTED PAID SHIPPED nautha CONTACTED PAID SHIPPED JoeG CONTACTED PAID SHIPPED orntar CONTACTED PAID SHIPPED OzDean CONTACTED PAID SHIPPED Buckethead CONTACTED PAID SHIPPED imawilliamray CONTACTED PAID SHIPPED riley1 CONTACTED PAID SHIPPED lee skelton CONTACTED PAID SHIPPED Hansolo227 CONTACTED PAID SHIPPED jqjedi CONTACTED DEPOSIT PAID jheilman CONTACTED PAID darkstar1974 CONTACTED PAID plus LEDS SHIPPED HarlockFan (x2) CONTACTED DEPOSIT PAID CCM434 CONTACTED ChameleonOne CONTACTED Ekfud CONTACTED PAID (send to work address) MandoJedi CONTACTED PAID (Clear grips) NeoUK CamrynHamm mightyCromm1066 DiegoCarrillo34 Fragment strategicgfy * electrophunk * Cadiva * Gflash * E60flip345 * Jinxors GoneSolo eifion comicguy13* propmainiac* Nunmaker* ManchegoVariant * amnesia0287 keyser
soze333 DudePerfect* BonesAreDollars MasterJedi NegativeCambre gmutt26
SgtToastie Sumrtym MasterJedi Maquettecity*
WebDev NotoriousBeerad EEvansHilton loveyuri genZOD armepater MechRep fineartjones MasterTokki Gary591
Jamez bogginhead Solo Almarr7954 EEvansHilton* smdwilliams** El Diablo** Mockle* mtortori65 Prush242*
Movie Magic L SKAAR L marker2037** JDiamond* wolters nixie APOLLO IND eighty5forlife trisem1 no87
stevecru yellin70* modelerdave** Indy Magnoli PAID SAMURAI1* BeaminScotty* ventuoguy SindreYK AncientMandalor BingoMaru*
Bacta
GeorgeyGreen** baron von blondle** dr_slurpee** achyle61* Robotprops kingohorror
hoboinblue
New Member
Apogies 1st message wasnt sending, hence the 2 messages
Eireland42
New Member
Irish family but I'm American. But my heart longs for the vacations I've taken in Ireland the past few years.
No worries, I'll put you on the list!
PSA: Shipping changes!
I can no longer ship the dummy rounds via Air mail internationally. This leaves us with two options. You can either opt out of receiving the rounds (I will adjust the price accordingly) or the kit can be shipped via Surface mail.
Western Europe in up to 2 weeks
Eastern Europe in up to 5 weeks
North America in up to 6 weeks
South America, Africa and Asia in up to 8 weeks
Australia in up to 12 weeks
I can no longer ship the dummy rounds via Air mail internationally. This leaves us with two options. You can either opt out of receiving the rounds (I will adjust the price accordingly) or the kit can be shipped via Surface mail.
Western Europe in up to 2 weeks
Eastern Europe in up to 5 weeks
North America in up to 6 weeks
South America, Africa and Asia in up to 8 weeks
Australia in up to 12 weeks
Eireland42
New Member
Without rounds would be fine for me as well. Shipping to US
imawilliamray
New Member
I just received my kit in the mail this morning and will add to the praises. Everything was packed nicely and looks great. Dave was great to work with and has been super on top of things. While I'm a little nervous about it, I'm very excited to get started working on this as soon as I have some time. In the mean time I'll probably read through wayouteast's excellent build thread 20 more times in preparation.
PSA: Shipping changes! AGAIN!
Royal Mail have been stopping the kits for inspection, from the last batch some got through and some have been returned to me. They first informed me that Inert rounds cannot be shipped via air mail. So I have been excluding them and shipping them via ground. but they have now sent back a kit that doesn't have rounds. I suspect I am now on some kind of list to do extra checks on the packages.
Going forward I think its best to not use Royal Mail. I will likely use FedEx or UPS from now on.
PS. this doesn't affect UK folk.
Royal Mail have been stopping the kits for inspection, from the last batch some got through and some have been returned to me. They first informed me that Inert rounds cannot be shipped via air mail. So I have been excluding them and shipping them via ground. but they have now sent back a kit that doesn't have rounds. I suspect I am now on some kind of list to do extra checks on the packages.
Going forward I think its best to not use Royal Mail. I will likely use FedEx or UPS from now on.
PS. this doesn't affect UK folk.
Shadoweclipse13
New Member
Has the price changed since the original post in 2022 (400 BPS)? I'm interested, but want to make sure that I've got the money ready (or easy to save) before I sign up.
Price has stayed the same, I have no plans to change it any time soon
stuartslattery2
New Member
Can you add me to the list?
stuartslattery2
New Member
Looks great
Added!
Riverstalker
New Member
Please add me to the list Dave and thank you for all the work on this project.
Similar threads
