Interest Metal Blade Runner Blaster Based on AndersEFP Design

DaveChaos

Well-Known Member
RPF PREMIUM MEMBER
I'm finally at the stage to start perpetrations on my run for the Metal Blade Runner Blaster based on AndersEFP designs, I have a build log of this project HERE that is now just over a year in the making.

This run will be made in batches of 5 at a time due to the work involved and my own sanity.

The run(s) will be for a DIY Kit made of Pewter and Resin cast of Anders design of Deckard Blade Runner Blaster. I encourage you to have a look at the build log to see how this blaster kit differs from other available kits and the changes Anders has made for this project that differ from his files that are available on Thingiverse

This is an image of the Prototype.
20220705_135812.jpg

20220705_135831.jpg


The main parts are cast Pewter, all the Black parts are cast Resin. This includes a resin cast Cylinder, I know a lot of you want a metal Cylinder but its just not possible for me to make one in metal. I hope this decision reflects in the price of the kit. The Barrel will be Aluminium. Also included are the Amber grips and x5 44. Special rounds. The rounds will look real with un-struck primers! they are however 100% inert. As I am in the UK I am forced to follow local law so the rounds will have a hole drilled in the side... once in the Cylinder you wont see them. Electronics for the mag and green side lights are also supplied. All holes will be drilled and tapped and bolts/screws are included.
20210821_194853 (1).jpg

I will update this post as it nears completion with more detailed info. I'm looking to price the kit at £350 (this could change) shipping will be an additional cost.

Interest List.

MandoJedi
userd1402
pnag
Greenkenzie
DarthWilder

Lovecrafty
Hirohawa
BROTHERFOSTER
strategicgfy
Fett_Ish - PARTS

Davidishida
seekerofgiants
BlindVoyeur
ObscureReferenc
electrophunk

Cadiva
gizmo
Gflash
E60flip345
tennantlim - PARTS

Paul FSebastian
comicguy13
propmainiac
funboy1013xx
xxBlackElvisxx

AliKarimi
Bishop6
ManchegoVariant
DudePerfect
Ryan Clinton

BonesAreDollars
sideous
 
Last edited:

dirtyjawa

Active Member
It looks like you have interest enough for almost 3 full runs. I'd like to get in on the third wave if possible (gives time to save money). I'm not the biggest BR fan, but I can't deny the gloriousness of this prop. It's breathtaking.
 
Last edited:

dirtyjawa

Active Member
Watch it buddy! ;)
Lol Let me clarify. I'm a NEWer fan of Blade Runner. I'm not as big of a fan as most, being newer to the franchise and all. But I love both films. I just don't which cut of the original to go with, but that's a can of worms for another time and place :)
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top