Re: CLU and Rinzler Helmet
IT IS FINISHED!
time to catch up on some sleep...:lol
IT IS FINISHED!
time to catch up on some sleep...:lol
Tron: Legacy CLU helmet build
- Thread starter Crimson490
- Start date
-
- Tags
- tron legacy
R
Robotnik976
Guest
Re: CLU and Rinzler Helmet
This is stunning man! Awesome work!
This is stunning man! Awesome work!
Re: CLU and Rinzler Helmet
Thanks!
Now i'm working on the Rinzler helmet for my other son. but i won't have time to make a mold for it before halloween. I'll just poke some holes through the foam/bondo. He's gonna be so jealous of his brother!:behave
Here's some other random pictures...
Thanks!
Now i'm working on the Rinzler helmet for my other son. but i won't have time to make a mold for it before halloween. I'll just poke some holes through the foam/bondo. He's gonna be so jealous of his brother!:behave
Here's some other random pictures...
UnholySpectacle
New Member
Re: CLU and Rinzler Helmet
That is super impressive and now I want one. Good work!
That is super impressive and now I want one. Good work!
Re: CLU and Rinzler Helmet
That is pretty amazing!
In my opinion the lower jaw-line flares out a bit too much, but it's probably one of the most accurate *finished* C.L.U. helmets I have seen.
Awesome job!
I have kinda stopped as of late with mine, I re-started with the pepakura xbox avatar version because while my free-hand version was great, pepakura seems easier and more accurate so far. But I don't need it for Halloween, so I'm not worried. I'm more or less developing the script instead... (For my personal fun project in video production college I want to do a Tron: Legacy sequel.)
That is pretty amazing!
In my opinion the lower jaw-line flares out a bit too much, but it's probably one of the most accurate *finished* C.L.U. helmets I have seen.
Awesome job!
I have kinda stopped as of late with mine, I re-started with the pepakura xbox avatar version because while my free-hand version was great, pepakura seems easier and more accurate so far. But I don't need it for Halloween, so I'm not worried. I'm more or less developing the script instead... (For my personal fun project in video production college I want to do a Tron: Legacy sequel.)
Last edited:
Re: CLU and Rinzler Helmet
Thanks, and good luck with your script!
And I totally agree about the jaw line - it's one of those things that in certain angles stands out to me, too. I appreciate the feedback.
If I can be honest, my plan is to sell a couple of these and then reinvest into the master mold with some of these alterations. I'd also add the rear triangular vent features and spend some time tinkering around with a vacuform front.
Thanks, and good luck with your script!
And I totally agree about the jaw line - it's one of those things that in certain angles stands out to me, too. I appreciate the feedback.
If I can be honest, my plan is to sell a couple of these and then reinvest into the master mold with some of these alterations. I'd also add the rear triangular vent features and spend some time tinkering around with a vacuform front.
Re: CLU and Rinzler Helmet
Hey, I'm also working on a clu outfit and helmet, (I've followed/ posted on the gigantic "tron legacy costume" thread) and I stumbled across your posts.
It looks like I'm using a similar technique for casting, I was wondering how to were able to remove the model you sculpted from the silicon without tearing the silicon? It looks like you used 1 piece for the silicon mold, i have been using smooth-on's oomoo 25, and needed to make the mold two pieces to prevent tearing, but this makes it slightly more difficult to cast.
Hey, I'm also working on a clu outfit and helmet, (I've followed/ posted on the gigantic "tron legacy costume" thread) and I stumbled across your posts.
It looks like I'm using a similar technique for casting, I was wondering how to were able to remove the model you sculpted from the silicon without tearing the silicon? It looks like you used 1 piece for the silicon mold, i have been using smooth-on's oomoo 25, and needed to make the mold two pieces to prevent tearing, but this makes it slightly more difficult to cast.
clerksfan37
New Member
Re: CLU and Rinzler Helmet
Phenomenal work!
Phenomenal work!
Re: CLU and Rinzler Helmet
Bsal, you are correct - i'm using a single silicon jacket with a 2-pc hard shell (mother mold). I wanted to avoid any flash or parting lines on the cast helmet. I used Smooth-on's Rebound 25 silicon. It appears that the OOMOO is not as pliable or resistant to tearing as the Rebound. Here's a side by side comparison:
OOMOO 25 Elongation at Break: 250% Tear Strength: 40pli
Rebound 25 Elongation at Break: 690% Tear Strength: 120pli
Give it a try - i think you'll find success! So far, i've pulled off my 1-pc jacket three times, and never one tear.
Bsal, you are correct - i'm using a single silicon jacket with a 2-pc hard shell (mother mold). I wanted to avoid any flash or parting lines on the cast helmet. I used Smooth-on's Rebound 25 silicon. It appears that the OOMOO is not as pliable or resistant to tearing as the Rebound. Here's a side by side comparison:
OOMOO 25 Elongation at Break: 250% Tear Strength: 40pli
Rebound 25 Elongation at Break: 690% Tear Strength: 120pli
Give it a try - i think you'll find success! So far, i've pulled off my 1-pc jacket three times, and never one tear.
Last edited:
Re: CLU and Rinzler Helmet
clerksfan37 and Panzer, thank you very much!
Per RPF rules, on November 16th, I'll be permitted to make a junkyard post selling these.
clerksfan37 and Panzer, thank you very much!
Per RPF rules, on November 16th, I'll be permitted to make a junkyard post selling these.
Panzer
Well-Known Member
Re: CLU and Rinzler Helmet
Time to start saving up I suppose. So you actually made it so you can see out of the helmet? Very nice, if I recall correctly the CLU helmet was solid and they used a camera and screen so the actor could see out of it. I may be remembering that wrong though.
Time to start saving up I suppose. So you actually made it so you can see out of the helmet? Very nice, if I recall correctly the CLU helmet was solid and they used a camera and screen so the actor could see out of it. I may be remembering that wrong though.
Re: CLU and Rinzler Helmet
Yes - visibility is narrow, but good and clear.
Because the clear resin leaves you with cloudy visibility, i cut out the front center panel and glued in a clear plastic piece. It blended in nice.
yeah, I heard that the camera was mounted up in the triangular feature on the forehead.
Yes - visibility is narrow, but good and clear.
Because the clear resin leaves you with cloudy visibility, i cut out the front center panel and glued in a clear plastic piece. It blended in nice.
yeah, I heard that the camera was mounted up in the triangular feature on the forehead.
Re: CLU and Rinzler Helmet
that's right - if you look back at the pictures on page 1, it's tinted and you can't see in from the outside. VHT NiteShades - about three passes makes it dark enough.
that's right - if you look back at the pictures on page 1, it's tinted and you can't see in from the outside. VHT NiteShades - about three passes makes it dark enough.
Re: CLU and Rinzler Helmet
too funny not to share...
too funny not to share...
Re: CLU and Rinzler Helmet
Awesome thread. Thanks for making and sharing. Also thank you for sharing the info on your JY thread. I was actually quite tempted on sporting one of these on my bike, but a normal helmet has such limited visibility, I certainly couldn’t manage to ride with zero peripheral vision.
Awesome thread. Thanks for making and sharing. Also thank you for sharing the info on your JY thread. I was actually quite tempted on sporting one of these on my bike, but a normal helmet has such limited visibility, I certainly couldn’t manage to ride with zero peripheral vision.
Last edited:
Similar threads
