-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run 2nd Run of Accurate RotJ Force Pike - Weapon of the Emperor's Royal Guard
Im in
Deposit sent!
Thank you very much!
Deposit sent!
Thank you very much!
JtheTrenchKnigh
New Member
In! Pa
In! Deposit sent
Hi all!
As you may or may not be aware I've received a consistent trickle of messages asking about my original Force Pike run and recently the interest seems to be rising, (surely the result of Inquisitor Peregrinus' prodding, so you can thank/blame them as appropriate) and I think interest levels are high enough to sustain a second run of these!
Obviously the number of people actually committing is always lower than the number of people who say they will, so it's still up in the air whether we'll actually get enough deposits to make it happen, but I've decided to push ahead and find out
For those unaware of the original run, the thread can be found here: Limited Run - Accurate RotJ Force Pike - Weapon of the Emperor's Royal Guard
Also my public research can be seen in this thread: RotJ Force Pike Accurate Build/Research but I will summarise the salient points here:
Here are some pictures of a completed pike form the first run, and I also invite anyone from the first run to share their pictures/experiences!
- Extremely accurate model designed from many close-up reference pictures, screen caps and photos of the exhibited prop and accurately scaled from multiple known pieces.
- Fully CNC machined from aluminum, polished and selectively anodized black to accurately resemble the filming prop. The top 'gear' section will be machined from steel just like the real found piece and the pommel will be transparent acrylic as on the real prop.
- Electronics capable - the original prop had a light inside to illuminate the pommel and there will be space inside to install a light and battery to replicate this functionality or even to go beyond the real prop and add soundboard/speaker if that's what you're into.
View attachment 1587259View attachment 1587260View attachment 1587261View attachment 1587262View attachment 1587263View attachment 1587264
Obviously due to increased costs and ...everything... in the 4 years since the first run I won't be able to offer these at the price they originally were but I'm hoping enough people follow through that we can still make it happen.
I have some preliminary quotes from the machine shop for a run of 50 of these to be completed within a few of months of the start of the run. I do not need all 50 sign ups for the run to go ahead but if we don't have suffient numbers I may have to contact everyone on the list to see if we can figure out a new cost that will let us scrape together the funds get these made.
I plan for the pre-order price to be $295 per pike, payable as a $150 deposit before the run begins and a second payment of the remaining amount plus shipping to be paid once they are ready to ship. As with the previous run, this price is only for pre-orders with deposits paid before close of the pre-order period and I am tentatively planning for any remaining pikes to be available at $345.
To sign up please PayPal your $150 deposit to tom@proplicator.com with your RPF name, real name and address and comment here stating that you are in. I will keep an updated list here in this post. I do not currently have a date for closing of pre-orders as actual deposit numbers will determine whether or not we can do the run. Please only send the deposit if you are committed to this run as deposits will only be refunded if the run fails to go ahead. As with the previous run, if you wish to back out you'll need to find someone to take your spot
Sign Ups
--------------------------
1. kurtyboy - Deposit paid
2. Jamesfett - Deposit paid
3. JoeG - Deposit paid
4. Darth Elevator - Deposit paid
5. GhostOfThrawn - Deposit paid
6. ScourgiousJinx - Deposit paid
7. Slave1 - Deposit paid
8. djedi - Deposit paid
9. OddballFett - Deposit paid
10. Synz314 - Deposit paid
11. Johann - Deposit paid
12. Corbadda - Deposit paid
13. Scimitar - Deposit paid
14. Romlyn - Deposit paid
15. Ryan Clinton - Deposit pa
Hi all!
As you may or may not be aware I've received a consistent trickle of messages asking about my original Force Pike run and recently the interest seems to be rising, (surely the result of Inquisitor Peregrinus' prodding, so you can thank/blame them as appropriate
Obviously the number of people actually committing is always lower than the number of people who say they will, so it's still up in the air whether we'll actually get enough deposits to make it happen, but I've decided to push ahead and find out
For those unaware of the original run, the thread can be found here: Limited Run - Accurate RotJ Force Pike - Weapon of the Emperor's Royal Guard
Also my public research can be seen in this thread: RotJ Force Pike Accurate Build/Research but I will summarise the salient points here:
Here are some pictures of a completed pike form the first run, and I also invite anyone from the first run to share their pictures/experiences!
- Extremely accurate model designed from many close-up reference pictures, screen caps and photos of the exhibited prop and accurately scaled from multiple known pieces.
- Fully CNC machined from aluminum, polished and selectively anodized black to accurately resemble the filming prop. The top 'gear' section will be machined from steel just like the real found piece and the pommel will be transparent acrylic as on the real prop.
- Electronics capable - the original prop had a light inside to illuminate the pommel and there will be space inside to install a light and battery to replicate this functionality or even to go beyond the real prop and add soundboard/speaker if that's what you're into.
View attachment 1587259View attachment 1587260View attachment 1587261View attachment 1587262View attachment 1587263View attachment 1587264
Obviously due to increased costs and ...everything... in the 4 years since the first run I won't be able to offer these at the price they originally were but I'm hoping enough people follow through that we can still make it happen.
I have some preliminary quotes from the machine shop for a run of 50 of these to be completed within a few of months of the start of the run. I do not need all 50 sign ups for the run to go ahead but if we don't have suffient numbers I may have to contact everyone on the list to see if we can figure out a new cost that will let us scrape together the funds get these made.
I plan for the pre-order price to be $295 per pike, payable as a $150 deposit before the run begins and a second payment of the remaining amount plus shipping to be paid once they are ready to ship. As with the previous run, this price is only for pre-orders with deposits paid before close of the pre-order period and I am tentatively planning for any remaining pikes to be available at $345.
To sign up please PayPal your $150 deposit to tom@proplicator.com with your RPF name, real name and address and comment here stating that you are in. I will keep an updated list here in this post. I do not currently have a date for closing of pre-orders as actual deposit numbers will determine whether or not we can do the run. Please only send the deposit if you are committed to this run as deposits will only be refunded if the run fails to go ahead. As with the previous run, if you wish to back out you'll need to find someone to take your spot
Sign Ups
--------------------------
1. kurtyboy - Deposit paid
2. Jamesfett - Deposit paid
3. JoeG - Deposit paid
4. Darth Elevator - Deposit paid
5. GhostOfThrawn - Deposit paid
6. ScourgiousJinx - Deposit paid
7. Slave1 - Deposit paid
8. djedi - Deposit paid
9. OddballFett - Deposit paid
10. Synz314 - Deposit paid
11. Johann - Deposit paid
12. Corbadda - Deposit paid
13. Scimitar - Deposit paid
14. Romlyn - Deposit paid
15. Ryan Clinton - Deposit paid
In! Deposit sent
smileshope
New Member
When will this run close? Trying to decide when I need to send deposit in.
Have you sent the deposit? I don't see anything yet
I don't currently have a closing date as we don't yet have enough people for the run to go ahead
Yes
Synz314
Sr Member
Right? There were over 40 interested folks in the other thread. Where y'all at?!
Man, I get distracted for a few days and this happens. *lol* I'm going to put myself in for two for right now. I said six in the other thread (I'd like to eventually garb and equip all Guards in my local Garrison), but I'll start with two and give others a chance to get in on this first. A brace is a good start, and I don't want to be greedy if it costs someone else getting a single one. Tom, I'll get those two deposits to you after the weekend. That work?
If things slow down in a couple weeks, I'll pop for the other four, as needed, to do my part to ensure a full run.
If things slow down in a couple weeks, I'll pop for the other four, as needed, to do my part to ensure a full run.
Similar threads
