Willem Dafoe GREEN GOBLIN HELMET on the cheap by Rehauling an Xcoser Helmet!

UtanteV27

Member
Just want to note that I would only be slightly dusting the 'purple fog' over the back edges of the helmet and ears,
I also notice there is a 2 tone Vader style use of the purple paint on the sides of the helmet
 

Attachments

  • 20220108_194533.jpg
    20220108_194533.jpg
    64.5 KB · Views: 82
  • 20220108_194514.jpg
    20220108_194514.jpg
    59.8 KB · Views: 85
  • 1Mtept2.jpg
    1Mtept2.jpg
    58.7 KB · Views: 72
  • FTKO6X9IV0BFVKP.jpg
    FTKO6X9IV0BFVKP.jpg
    73.1 KB · Views: 61
  • 30c43f41_efx_accurate_1.jpeg
    30c43f41_efx_accurate_1.jpeg
    69.6 KB · Views: 54
  • 67cc11f4822a2b2c9bbc06a894bcb609.jpg
    67cc11f4822a2b2c9bbc06a894bcb609.jpg
    84.4 KB · Views: 73

PhantomForge

Well-Known Member
RPF PREMIUM MEMBER
Just want to note that I would only be slightly dusting the 'purple fog' over the back edges of the helmet and ears,
I also notice there is a 2 tone Vader style use of the purple paint on the sides of the helmet
Interesting— are you sure it's two tone vader/opera mask style and not just the nature of the color shifting paint with certain highlights/shadows on parts of the helmet? In other scenes with less dramatic lighting, the parts that should look purple from the photos above look green, with different parts of the helmet looking purple.

green-goblin-spider-man-e1629973952413-1050x589.jpeg
Green-Goblin-Spider-Man-header.jpeg
Green-Goblin.jpeg
Screen Shot 2022-01-09 at 5.35.17 PM.png
Screen Shot 2022-01-09 at 5.35.07 PM.png
Screen Shot 2022-01-09 at 5.35.00 PM.png
 

UtanteV27

Member
Interesting— are you sure it's two tone vader/opera mask style and not just the nature of the color shifting paint with certain highlights/shadows on parts of the helmet? In other scenes with less dramatic lighting, the parts that should look purple from the photos above look green, with different parts of the helmet looking purple.

View attachment 1532283 View attachment 1532284 View attachment 1532282 View attachment 1532279 View attachment 1532280 View attachment 1532281
Thx, if I had access to accurate automotive chameleon paint, then I would just do the whole thing one color, but I think I'll do a base coat of green&teal, and a light dust of teal&purple on the sides resembling the 4th image you provided
 

UtanteV27

Member
Here are all the images I have photoshopped when figuring out exactly what I need to do in terms of reshaping the mask
 

Attachments

  • 20211129_133337.jpg
    20211129_133337.jpg
    1.7 MB · Views: 68
  • 20211129_142443.jpg
    20211129_142443.jpg
    2.9 MB · Views: 65
  • PicsArt_11-28-01.11.35.jpg
    PicsArt_11-28-01.11.35.jpg
    1.5 MB · Views: 54
  • PicsArt_11-29-02.59.31.jpg
    PicsArt_11-29-02.59.31.jpg
    941.9 KB · Views: 49
  • PicsArt_11-28-08.49.00.png
    PicsArt_11-28-08.49.00.png
    1.6 MB · Views: 53
  • 20211129_191511.jpg
    20211129_191511.jpg
    514.8 KB · Views: 47
  • Picsart_22-01-02_18-27-02-697.jpg
    Picsart_22-01-02_18-27-02-697.jpg
    2.3 MB · Views: 40
  • Picsart_22-01-02_18-37-22-292.jpg
    Picsart_22-01-02_18-37-22-292.jpg
    2 MB · Views: 44
  • PicsArt_11-28-08.59.34.jpg
    PicsArt_11-28-08.59.34.jpg
    417 KB · Views: 49
  • Picsart_22-01-02_19-53-47-641.jpg
    Picsart_22-01-02_19-53-47-641.jpg
    4.8 MB · Views: 61

UtanteV27

Member
More filling, more cutting, more adding, more constantly checking my references, fixed the eyes, mouth, chin, and eyebrows aswell as added the sides of the dome
 

Attachments

  • D6n3bF2X4AUL2tj.jpeg
    D6n3bF2X4AUL2tj.jpeg
    530.7 KB · Views: 48
  • 20220113_223124.jpg
    20220113_223124.jpg
    2 MB · Views: 42
  • 20220113_183655.jpg
    20220113_183655.jpg
    977.4 KB · Views: 46
  • 20220113_223115.jpg
    20220113_223115.jpg
    1.2 MB · Views: 39
  • 20220113_223119.jpg
    20220113_223119.jpg
    1.9 MB · Views: 36
  • 20220113_183713.jpg
    20220113_183713.jpg
    1.2 MB · Views: 39
  • 20220113_183728.jpg
    20220113_183728.jpg
    1.7 MB · Views: 36
  • 20220113_223110.jpg
    20220113_223110.jpg
    1.8 MB · Views: 41

UtanteV27

Member
Eventually plan to make a neck piece by gluing bungee strap cord to a morph suit, I could embroider it but that's a lot of time and people can never do the ribbing tight enough, nor do they get it in perfect lines, wrapped cord would not only look more accurate, but they actually did glue down leather rope to the suit in alot of areas.
 

Attachments

  • Picture_043.jpg
    Picture_043.jpg
    465.2 KB · Views: 55
  • images (2).jpeg
    images (2).jpeg
    228 KB · Views: 59
  • Picture_044.jpg
    Picture_044.jpg
    361.6 KB · Views: 57
  • 54398458.jpg
    54398458.jpg
    79.9 KB · Views: 56

EAFFAEEAF

New Member
Here is a free version of the file. You could have it printed through one of those 3D printing services. Can't imagine it would cost more than the X-coser mask. Green Goblin Helmet by TMBort
I got an estimate for $600-$700. I chose a local place, so I wouldn't have to pay for shipping, so other places may have lower prices, but that's what I got.

(Note, this estimate included a "bottom-back" piece from another model, because it wasn't included in this one, and the estimate for the other model was $1,000+. Apparently it's more expensive to print the entire front of the helmet in one piece, instead of four)

So yeah, UtanteV27's plan may very well be the most cost effective way to make a high quality Green Goblin helmet. If you want to go even cheaper, you may have to go the cardboard or EVA foam route.
 

Synz314

Sr Member
I got an estimate for $600-$700. I chose a local place, so I wouldn't have to pay for shipping, so other places may have lower prices, but that's what I got.

(Note, this estimate included a "bottom-back" piece from another model, because it wasn't included in this one, and the estimate for the other model was $1,000+. Apparently it's more expensive to print the entire front of the helmet in one piece, instead of four)

So yeah, UtanteV27's plan may very well be the most cost effective way to make a high quality Green Goblin helmet. If you want to go even cheaper, you may have to go the cardboard or EVA foam route.
$600 for a raw print? TJackFX sells resin castings of the DO3D file with the backplate and mirrored gold lenses for $200. I wouldn't even pay $1000 for a fully finished one. You can get finished ones for much less than that.
 

UtanteV27

Member
Cut a v shape into the red part and heated it with my hair dryer to match the contours of the rest of the mask, beefing all the edges with foam and wrapping the back in tape to reduce the amount of putty I'll have to use.

Plenty of refilling and sanding to make the mask symmetrical

Also alot of looking back and forth from my reference images I ended up having to change the angle of the dome, making alot of the below pictures pointless, I will post the new dome immediately after this, but If I had the angle right from the beginning then the first paragraph would still be very useful information
 

Attachments

  • 20220115_201143.jpg
    20220115_201143.jpg
    1.8 MB · Views: 50
  • 20220115_124706.jpg
    20220115_124706.jpg
    1.8 MB · Views: 40
  • 20220115_124710.jpg
    20220115_124710.jpg
    1.3 MB · Views: 43
  • 20220115_124714.jpg
    20220115_124714.jpg
    1.8 MB · Views: 38
  • 20220115_193142.jpg
    20220115_193142.jpg
    2.1 MB · Views: 45
  • 20220115_204222.jpg
    20220115_204222.jpg
    2.3 MB · Views: 46

UtanteV27

Member
New, fully accurate dome,

The original was too curved, like the El_Fett helmet,
I was scared it might have been inaccurate after remembering how straight the dome looked on the dumpster in No Way Home, and I was correct! thanks fear of guessing!
 

Attachments

  • 20220116_002726.jpg
    20220116_002726.jpg
    568.8 KB · Views: 63
  • 20220116_002639.jpg
    20220116_002639.jpg
    350.3 KB · Views: 63
  • altgoblin1.png
    altgoblin1.png
    396.9 KB · Views: 68
  • greengoblin.jpg
    greengoblin.jpg
    133.8 KB · Views: 72
  • Picsart_22-01-16_00-20-55-544.jpg
    Picsart_22-01-16_00-20-55-544.jpg
    3.3 MB · Views: 61
  • 20220116_001826.jpg
    20220116_001826.jpg
    1.4 MB · Views: 63

UtanteV27

Member
Its getting alot better but theres still something about that eye shape
Inspecting the eye sockets I noticed that even though I had fixed the side profile, the interior of the sockets gets really thick around the sides, bending the lenses so that from the front it's a circle and from the sides it's more oval, I have already started the right socket
 

Attachments

  • maxresdefault (33).jpg
    maxresdefault (33).jpg
    104.4 KB · Views: 39
  • 97163f76d46f5a0fb6c3d981bc376759.png
    97163f76d46f5a0fb6c3d981bc376759.png
    1.3 MB · Views: 38
  • 20220116_003725.jpg
    20220116_003725.jpg
    2.1 MB · Views: 40
  • 20220113_183655.jpg
    20220113_183655.jpg
    977.4 KB · Views: 40
  • 51KZ3F9-I1L._AC_UY1000_.jpg
    51KZ3F9-I1L._AC_UY1000_.jpg
    39 KB · Views: 38
  • H3257-L45061834.jpg
    H3257-L45061834.jpg
    117.3 KB · Views: 35

TheNickFox

Sr Member
RPF PREMIUM MEMBER
I'm sure you already have these, but just in case you don't here are pretty close to straight on side and front shots of one of the prototypes. (The tip of the nose seems to be the biggest difference I can quickly spot)

Love seeing this project updated each day and can't wait to see it finished!

845326-o.jpg
845320-o.jpg
 

UtanteV27

Member
Check out this helmet that was gonna be used! It has a purple backplate and Iron Mannstyle detachable faceplate for more expressive scenes!
Although the helmet we ended up with is iconic and though I would rather have a film accurate helmet before any hypothetical, I 100% prefer this one
 

Attachments

  • InShot_20220118_135556265.mp4
    24.3 MB

UtanteV27

Member
Top teeth, they don't look particularly real but I'm probably gonna buy some from Tjackfx
 

Attachments

  • 20220116_133120.jpg
    20220116_133120.jpg
    1.4 MB · Views: 35
  • 20220116_184817.jpg
    20220116_184817.jpg
    2.5 MB · Views: 33

UtanteV27

Member
I would like to create a design for the interior of the mask, I know in actuality he would just have wires and a few gears around the eyes but for some reason i really want to go full Rots Darth Vader
 

Attachments

  • 20210226_125942.jpg
    20210226_125942.jpg
    2.5 MB · Views: 54

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top