TRAINING REMOTE KITS? Interest check?
- Thread starter BrundelFly
- Start date
Darth_Pain
Well-Known Member
Instrested
useful idiot
Active Member
Interested.
<div class='quotetop'>(Apophis @ Jul 2 2006, 07:31 AM) [snapback]1272431[/snapback]</div>
I'm interested too.
I'm interested too.
PHArchivist
Master Member
I just need a set of resin wheels...
jedi_adrian
New Member
I would love to see picts of the resin
mb1k
Well-Known Member
<div class='quotetop'>(BrundelFly @ May 18 2006, 08:19 AM) [snapback]1246209[/snapback]</div>
If Brundelfly=Frank C, then yes. I'm interested.
Unable to post after seeing this in the spring until I could become a member with this November membership opening... :thumbsup
(MB1K - Please read the CoC and TOS. It's not allowed to publicly post a member's full name)
If Brundelfly=Frank C, then yes. I'm interested.
Unable to post after seeing this in the spring until I could become a member with this November membership opening... :thumbsup
(MB1K - Please read the CoC and TOS. It's not allowed to publicly post a member's full name)
Last edited by a moderator:
Interested.
KnightAsylum
Sr Member
Interested
I hadn't seen this thread in a while.
Seems to be enough interest....
<div class='quotetop'>QUOTE(Apophis @ Nov 4 2006, 11:05 PM) [snapback]1350842[/snapback]</div>
Seems to be enough interest....
<div class='quotetop'>QUOTE(Apophis @ Nov 4 2006, 11:05 PM) [snapback]1350842[/snapback]</div>
If I did these...the parts would all be individual.
Also the Middle band of rectangles.....would be styrene, measure provided...but you can buy your own plastic.
Also, the Domes, the info on where and what to order would be provided.
You order them.
The kit would be the rims and tank parts, one complete set to finish a remote.
Thats what Im thinking about.
Also the Middle band of rectangles.....would be styrene, measure provided...but you can buy your own plastic.
Also, the Domes, the info on where and what to order would be provided.
You order them.
The kit would be the rims and tank parts, one complete set to finish a remote.
Thats what Im thinking about.
Gigatron
Sr Member
<div class='quotetop'>QUOTE(BrundelFly @ Dec 8 2006, 04:49 PM) [snapback]1373894[/snapback]</div>
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
I forgot about that...yikes.
Yeah....or better yet. A pattern and maybe a vacu formed dome to cut out?
<div class='quotetop'>QUOTE(Gigatron @ Dec 8 2006, 06:14 PM) [snapback]1373935[/snapback]</div>
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
[/b][/quote]
Yeah....or better yet. A pattern and maybe a vacu formed dome to cut out?
<div class='quotetop'>QUOTE(Gigatron @ Dec 8 2006, 06:14 PM) [snapback]1373935[/snapback]</div>
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
[/b][/quote]
Qrest Fourstar
Sr Member
I've got Domes, I've had them for about 10 years. Got them for another project. 6" plastruct domes, ready to go. I'm in for just the 'detailed parts(those rectangles can be cut out of styrene).
<div class='quotetop'>QUOTE(BrundelFly @ Dec 8 2006, 12:24 PM) [snapback]1373939[/snapback]</div>
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
[/b][/quote]
[/b][/quote]
<div class='quotetop'>QUOTE(BrundelFly @ Dec 8 2006, 12:24 PM) [snapback]1373939[/snapback]</div>
Just from someone who has scratch built one of these before (incredible tutorial by the way, BF.), is there a way you could include a template for those semi-circular rings that go around the rims? That is the one thing that really slowed down my build. Having to cut them out and then hand shape each one because of the curvature was a real nightmare.
Since I'm not involved in this run (building one was more than enough), that's the one thing I would have loved to have had, but I'm sure people doing this build would appreciate it (if making a template is even possible).
-Fred
[/b][/quote]
[/b][/quote]
Gigatron
Sr Member
<div class='quotetop'>QUOTE(BrundelFly @ Dec 8 2006, 06:24 PM) [snapback]1373939[/snapback]</div>
I think a simple pattern would suffice. The problem is that they are not simple rings that are being cut out. Because of the geometry of the dome, the rings aren't true circles. I can't even describe what the heck the final shape is :confused .
Just sayin', is all... :thumbsup
-Fred
I think a simple pattern would suffice. The problem is that they are not simple rings that are being cut out. Because of the geometry of the dome, the rings aren't true circles. I can't even describe what the heck the final shape is :confused .
Just sayin', is all... :thumbsup
-Fred
roguemodeler
Active Member
Yes, I'm interested.
Similar threads
