gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE-> HELMET FOAM TEMPLATES POSTED**
NICE ONE ON THE HELMET BRO!! :love
NICE ONE ON THE HELMET BRO!! :love
Robocop: The Original for Pepakura **8/29 1st post update, foam glove**
Re: Robocop: The Original for Pepakura **UPDATE-> LEFT AND RIGHT BICEPS POSTED**
Nice work so far! I printed my own paper pep helmet last night (scale 11.5) and will start it this evening.
The biceps are posted in paper, and the left bicep is up in foam. I decided to also post the lower half of the elbow hinges to aid in building, they should be up later today.
Big shout out to Gaiatron for his unfolding!
thumbsup:thumbsup
Nice work so far! I printed my own paper pep helmet last night (scale 11.5) and will start it this evening.
The biceps are posted in paper, and the left bicep is up in foam. I decided to also post the lower half of the elbow hinges to aid in building, they should be up later today.
Big shout out to Gaiatron for his unfolding!
thumbsup:thumbsup
Re: Robocop: The Original for Pepakura **UPDATE-> UPPER FOREARM POSTED**
I decided to separate the upper forearm section so that both sides of the elbow hinge can be built now. No lower forearm yet, because I honestly don't like how it looks right now. I also thought about building slip-on gauntlets with gloves attached that will plug right into the upper forearm like the original. No matter how I finish mine, I'll release a pep forearm on here so people can decide for themselves.
The bicep and upper forearm should be scaled the same for the joints to line up. Don't remember if I mentioned this before, I also configured the peps so that they can be assembled manually in Pepakura. Hopefully makes scaling easier:
Thanks for looking!
I decided to separate the upper forearm section so that both sides of the elbow hinge can be built now. No lower forearm yet, because I honestly don't like how it looks right now. I also thought about building slip-on gauntlets with gloves attached that will plug right into the upper forearm like the original. No matter how I finish mine, I'll release a pep forearm on here so people can decide for themselves.
The bicep and upper forearm should be scaled the same for the joints to line up. Don't remember if I mentioned this before, I also configured the peps so that they can be assembled manually in Pepakura. Hopefully makes scaling easier:
Thanks for looking!
gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE-> UPPER FOREARM POSTED**
and the upper forearm just came in:
RobocopV1 upper forearm by laellee foam template by gaiatron - Download - 4shared
and the upper forearm just came in:
RobocopV1 upper forearm by laellee foam template by gaiatron - Download - 4shared
ecmuniz2
Active Member
Re: Robocop: The Original for Pepakura **UPDATE-> LEFT AND RIGHT BICEPS POSTED**
Nice! I'm interested to see how it turns out on paper. I'm still not used to working with foam, but trial and error goes a long way, lol. Well, I more or less finished the helmet, I only primed the top but kinda seems like the right color! lol! Crappy lighting but here's a couple pics. Again, a big thanks to you and Gaiatron for the hard work! I think I'll start on the left arm tomorrow in foam and see how that goes.
Nice work so far! I printed my own paper pep helmet last night (scale 11.5) and will start it this evening.
The biceps are posted in paper, and the left bicep is up in foam. I decided to also post the lower half of the elbow hinges to aid in building, they should be up later today.
Big shout out to Gaiatron for his unfolding!
Nice! I'm interested to see how it turns out on paper. I'm still not used to working with foam, but trial and error goes a long way, lol. Well, I more or less finished the helmet, I only primed the top but kinda seems like the right color! lol! Crappy lighting but here's a couple pics. Again, a big thanks to you and Gaiatron for the hard work! I think I'll start on the left arm tomorrow in foam and see how that goes.
ecmuniz2
Active Member
Re: Robocop: The Original for Pepakura **UPDATE-> HELMET FOAM TEMPLATES POSTED**
Thanks! It's your file!:thumbsup
gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE-> HELMET FOAM TEMPLATES POSTED**
nope bro, that's laellee's work. give the credit to him hehehe oh btw, did you use the default scale or did you resize it?
nope bro, that's laellee's work. give the credit to him hehehe oh btw, did you use the default scale or did you resize it?
Re: Robocop: The Original for Pepakura **UPDATE-> THIGHS POSTED**
Left and right thighs for the V1 have been added.
I am splitting time between projects right now, but I'll try to get as many of the proto files up as possible quickly. Gaiatron is working hard to get these files unfolded in foam, I will add them to the first post when they are completed.
I started on my helmet pep, but I haven't finished enough to check the sizing. I am still thinking that my 11.5 scale guesstimate is close, but I gotta build more to be sure. I will update the helmet paper pep download when I reset the default size. I would not want to build this in paper pep unless I was REALLY patient. :wacko
Left and right thighs for the V1 have been added.
I am splitting time between projects right now, but I'll try to get as many of the proto files up as possible quickly. Gaiatron is working hard to get these files unfolded in foam, I will add them to the first post when they are completed.
I started on my helmet pep, but I haven't finished enough to check the sizing. I am still thinking that my 11.5 scale guesstimate is close, but I gotta build more to be sure. I will update the helmet paper pep download when I reset the default size. I would not want to build this in paper pep unless I was REALLY patient. :wacko
gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE-> THIGHS POSTED**
and here is the left thigh:
RobocopV1 left thigh by laellee foam by gaiatron - Download - 4shared
still working on the right bicep and thigh.
and here is the left thigh:
RobocopV1 left thigh by laellee foam by gaiatron - Download - 4shared
still working on the right bicep and thigh.
Re: Robocop: The Original for Pepakura **UPDATE-> THIGHS POSTED**
Thanks Gaiatronthumbsup:thumbsup
The paper pep for the left shin has been posted. I have left the main calf in one piece; I want to build this and check the fit, it's gotta be sectioned to wear. A lower rear calf clam shell would be great, but I'm open to suggestions at this point.
Thanks Gaiatron
thumbsup:thumbsupThe paper pep for the left shin has been posted. I have left the main calf in one piece; I want to build this and check the fit, it's gotta be sectioned to wear. A lower rear calf clam shell would be great, but I'm open to suggestions at this point.
Re: Robocop: The Original for Pepakura **UPDATE->SHIN POSTED**
Take a break, man! :lol You've been unfolding fast as heck already. You also have to remember, I don't sleep :facepalm
On that note, I'll be posting the shoe peps tonight. The two detail tubes on the inner sides of each shoe were left unattached (still included in pep). They'd be a lot easier to make freehand.
I'm waiting to get a helmet pepped out and sized properly before I finish the neck cowl. The pistons are essentially done if someone wants a pep for them. I am still negotiating with myself over the glove pep.
Take a break, man! :lol You've been unfolding fast as heck already. You also have to remember, I don't sleep :facepalm
On that note, I'll be posting the shoe peps tonight. The two detail tubes on the inner sides of each shoe were left unattached (still included in pep). They'd be a lot easier to make freehand.
I'm waiting to get a helmet pepped out and sized properly before I finish the neck cowl. The pistons are essentially done if someone wants a pep for them. I am still negotiating with myself over the glove pep.
gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE->SHIN POSTED**
RobocopV1 right thigh by laellee foam by gaiatron - Download - 4shared
on to the next part.
:confused?! you must be batman, bro hehehehe anyways, here's the right thigh:
RobocopV1 right thigh by laellee foam by gaiatron - Download - 4shared
on to the next part.
gaiatron
Well-Known Member
Re: Robocop: The Original for Pepakura **UPDATE->Shoes added**
and here is the lower forearm:
RobocopV1 lower forearm by laellee foam by gaiatron - Download - 4shared
and here is the lower forearm:
RobocopV1 lower forearm by laellee foam by gaiatron - Download - 4shared
Bergerman
New Member
Re: Robocop: The Original for Pepakura **UPDATE->SHIN POSTED**
Is this a record for the fastest pep files ever ?????
Thankyou for sharing them amazing work
just a thought with the glove pep have you ever used plast dip they have a flexable gloss to go over the rubber as well i am thinking could it be used on this project in any way ?
Is this a record for the fastest pep files ever ?????
Thankyou for sharing them amazing work
just a thought with the glove pep have you ever used plast dip they have a flexable gloss to go over the rubber as well i am thinking could it be used on this project in any way ?
Re: Robocop: The Original for Pepakura **UPDATE->Shoes added**
This would have come in handy when I was trying to freehand my halloween costume last year
Another option for the helmet: when I did mine i used a plastic costume biker helmet like this one: http://www.spirithalloween.com/imag...tivezoom/processed/01146620.interactive.a.jpg and cut off the bottom edge, then hot glued the foam to it. Gives you a perfect dome, and once it's painted up you can't tell the difference from the foam. The helmet cuts easily with a dremel and a cutting disc.
This would have come in handy when I was trying to freehand my halloween costume last year
Another option for the helmet: when I did mine i used a plastic costume biker helmet like this one: http://www.spirithalloween.com/imag...tivezoom/processed/01146620.interactive.a.jpg and cut off the bottom edge, then hot glued the foam to it. Gives you a perfect dome, and once it's painted up you can't tell the difference from the foam. The helmet cuts easily with a dremel and a cutting disc.
Re: Robocop: The Original for Pepakura **UPDATE->Shoes added**
Thank you! There is a lot of improvement that can be done to the model and peps, but it's a good starting point.
About the gloves, that was one of the first thoughts I had. I thought that if I get my initial glove model to fit, dipping would give it a good flexible finish like these:
I like that idea a lot! The dome has a huge impact on how the finished helmet will look, and I'm not a huge fan of freehanding them unless I have to. I'm building mine right now, and I could have saved a couple o hours with one of those :behave
Thanks!
Thank you! There is a lot of improvement that can be done to the model and peps, but it's a good starting point.
About the gloves, that was one of the first thoughts I had. I thought that if I get my initial glove model to fit, dipping would give it a good flexible finish like these:
This would have come in handy when I was trying to freehand my halloween costume last year
Another option for the helmet: when I did mine i used a plastic costume biker helmet like this one: http://www.spirithalloween.com/imag...tivezoom/processed/01146620.interactive.a.jpg and cut off the bottom edge, then hot glued the foam to it. Gives you a perfect dome, and once it's painted up you can't tell the difference from the foam. The helmet cuts easily with a dremel and a cutting disc.
I like that idea a lot! The dome has a huge impact on how the finished helmet will look, and I'm not a huge fan of freehanding them unless I have to. I'm building mine right now, and I could have saved a couple o hours with one of those :behave
Thanks!
Re: Robocop: The Original for Pepakura **UPDATE->Shoes added**
Here's how mine ended up...just the cut helmet and 3 pieces of foam:
Re: Robocop: The Original for Pepakura **UPDATE->Shoes added**
That looks awesome! Great color too, how did you manage that?
That looks awesome! Great color too, how did you manage that?
Similar threads
