Live fire aliens m41a pulse rifle

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

septic

Well-Known Member
RPF PREMIUM MEMBER
Very nice. Would you be able to show a couple of pics of the inside face of the shrouds please? I wanna get an idea of what bits need to be carved out to fit the receiver.
 

Bacta

Active Member
View attachment 1469198
So Friday I began fitting the reciever to the shroud. Issues I ran into are well the thompson hcg isn't exactly accurate on where all the pins and switches are in the fcg so the slots are off. Further more the semi auto thompson differs from the full auto thompson so I had to make some slots bigger and create new ones.

Next thing I did was modify the thompson reciever. Because I plan to buy a full auto transferable Thompson one day and put it in this replica I don't want to modify the shroud too much. So I took off .0300 off of each side of the thompson reciever and she fits like a glove in the shoud.
Oh yeahhh!! ;)))
 

Evilhat3e

New Member
So I'm calling out for some help. Is there anyone on here in the UNITED STATES with a screen accurate down to the boots colonial marine costume? When I'm done with my build I'd love to get some film of someone in full kit blowing up some pumpkins. I'll pay you in getting to shoot a pulse rifle.
 

Attachments

  • 20210622_173522.jpg
    20210622_173522.jpg
    7.5 MB · Views: 39

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Bacta

Active Member
So I'm calling out for some help. Is there anyone on here in the UNITED STATES with a screen accurate down to the boots colonial marine costume? When I'm done with my build I'd love to get some film of someone in full kit blowing up some pumpkins. I'll pay you in getting to shoot a pulse rifle.
Me! Lol I’m Reynard on FB. You know I’m down.
 

Evilhat3e

New Member
More fitting and the shotgun spacer is done
 

Attachments

  • 20210713_090427.jpg
    20210713_090427.jpg
    1.5 MB · Views: 22
  • 20210713_090430.jpg
    20210713_090430.jpg
    1.6 MB · Views: 19
  • 20210713_090546.jpg
    20210713_090546.jpg
    1.5 MB · Views: 17
  • 20210714_093504.jpg
    20210714_093504.jpg
    1.9 MB · Views: 16
  • 20210714_094700.jpg
    20210714_094700.jpg
    1.5 MB · Views: 15
  • 20210714_094704.jpg
    20210714_094704.jpg
    1.6 MB · Views: 13
  • 20210714_140506.jpg
    20210714_140506.jpg
    1.5 MB · Views: 13
  • 20210714_141903.jpg
    20210714_141903.jpg
    1.4 MB · Views: 18
  • 20210714_141900.jpg
    20210714_141900.jpg
    2 MB · Views: 22
  • 20210714_141918.jpg
    20210714_141918.jpg
    2.1 MB · Views: 23
  • 20210715_113711.jpg
    20210715_113711.jpg
    1.3 MB · Views: 21
  • 20210715_155443.jpg
    20210715_155443.jpg
    1.4 MB · Views: 16
  • 20210715_175046.jpg
    20210715_175046.jpg
    1.5 MB · Views: 18
  • 20210715_175053.jpg
    20210715_175053.jpg
    1.8 MB · Views: 24

Axlotl

Master Member
Man, that is wicked awesome.
What does it weigh?
The one time I held a Tommy gun I was surprised at how heavy it was. How much heavier is it with all that extra stuff?
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

GrenadeKing

Sr Member
How much of that weight do the shrouds make up?

I imaged the metal shrouds to be quite costly and was personally considering fiberglass based on my experience with early M16s.

Your photos really make me want to build one of these.
 

Evilhat3e

New Member
How much of that weight do the shrouds make up?

I imaged the metal shrouds to be quite costly and was personally considering fiberglass based on my experience with early M16s.

Your photos really make me want to build one of these.
It's probably 4 pounds. I'll see if I can a n find time to weigh it for you. Fiberglass could work but if you can find hcg shroud use it its better for the gun because of the heat
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Evilhat3e

New Member
Cleaning up the pump extention with jb weld.
 

Attachments

  • 20210721_083908.jpg
    20210721_083908.jpg
    1.8 MB · Views: 10
  • 20210721_084912.jpg
    20210721_084912.jpg
    2 MB · Views: 11
  • 20210721_092354.jpg
    20210721_092354.jpg
    1.3 MB · Views: 11

Evilhat3e

New Member
Due to the barrel being cut short in the future I began hand filing and sanding them off the factory roll marks so that they don't show on the short stubby portion that will be sticking outside the launcher housing
 

Attachments

  • 20210722_094831.jpg
    20210722_094831.jpg
    1.9 MB · Views: 12
  • 20210722_095111.jpg
    20210722_095111.jpg
    1.5 MB · Views: 8
  • 20210722_095316.jpg
    20210722_095316.jpg
    1.5 MB · Views: 6
  • 20210722_095704.jpg
    20210722_095704.jpg
    1.5 MB · Views: 8
  • 20210722_095711.jpg
    20210722_095711.jpg
    889.4 KB · Views: 9

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top