JayCVenlo
Sr Member
Yes i have. As pdf, scaleable in adobe illustrator. Send me a pm with your emailadress and i will send it to you.
The hinges are made of Dibond material. 2mm. using chicago screws.
JayCVenlo's - Iron man Mark 43 Avengers 2 - Sintra and Fibreglass Build
- Thread starter JayCVenlo
- Start date
Yes i have. As pdf, scaleable in adobe illustrator. Send me a pm with your emailadress and i will send it to you.
The hinges are made of Dibond material. 2mm. using chicago screws.
JayCVenlo
Sr Member
short update. The tread is not dead.:ninja I will be continuing soon...
However i dont know if i will be able to finishing it complety in short time, because of trouble with the agancy i rented my appartement from.
I only have permission to build till 1 June.
All thanks to that complaining neighbour!!!!:devil
I will be looking .. to find a different way to complete or to sell everything as far as it is finished at that point.
Eventually i think i will be selling it anyway, because im looking to buy a house.
(so if anyone is interessted now for the incompleted suit you can always PM me.)
Current status:
Helmet - DONE
Neck/Brace/shoulders - DONE
Chest Back - DONE
ABS - DONE
Forearms - DONE
Left Hand - DONE (but maybe will be resprayed)
Right hand - Needs to be cleaned up for paint.
Upper arms - Are in Bondo stage 1/2
Elbow inlays - Ready for primer and paint
Cod - Bondo stage 2
Hippods - Bondo stage 2
Upper legs - 1 ready for fibreglass - 1 needs to be Pep'd
Lower legs - both ready for fibreglass
Boots - 1 ready for fibreglass - 1 needs to be Pep'd
However i dont know if i will be able to finishing it complety in short time, because of trouble with the agancy i rented my appartement from.
I only have permission to build till 1 June.
All thanks to that complaining neighbour!!!!:devil
I will be looking .. to find a different way to complete or to sell everything as far as it is finished at that point.
Eventually i think i will be selling it anyway, because im looking to buy a house.
(so if anyone is interessted now for the incompleted suit you can always PM me.)
Current status:
Helmet - DONE
Neck/Brace/shoulders - DONE
Chest Back - DONE
ABS - DONE
Forearms - DONE
Left Hand - DONE (but maybe will be resprayed)
Right hand - Needs to be cleaned up for paint.
Upper arms - Are in Bondo stage 1/2
Elbow inlays - Ready for primer and paint
Cod - Bondo stage 2
Hippods - Bondo stage 2
Upper legs - 1 ready for fibreglass - 1 needs to be Pep'd
Lower legs - both ready for fibreglass
Boots - 1 ready for fibreglass - 1 needs to be Pep'd
JayCVenlo
Sr Member
The smell. the bad thing is that he is the only one who doesnt like it. The other 5 neighbours dont care. But still the rent-corp have to keep everyone happy.
He is just an old man with a ****ty life. complete A.hole.
But i will definetly will be continuing buildig. And in my new house i will for sure build a proper working space.
blickfangQ2
Well-Known Member
What colors did you use on the forearms? The different golds look incredible with the dark red!
WallyIndustries
New Member
Sad to hear mate. Was really enjoying the build. If you're willing to part the suit up I would be interested in the helmet, understand if you're not though.
JayCVenlo
Sr Member
Sorry, parting up is not an option. I will only sell it as a whole.
jimbob1986
Member
There is a sales thread for the helmet featured in this build, I have one and couldn't be happier with it.
Here is a link to it
http://www.therpf.com/showthread.php?t=227776
Great build thread btw, really liked how this was coming together, a real shame about your problem neighbour. Look forward to seeing more of your builds.
This is an awesome build! So clean!
JayCVenlo
Sr Member
WallyIndustries
New Member
JayCVenlo
Sr Member
i used one LED Panel with 24 LEDs and on top of that an LED ring, power by 2 - 9Volt batterys
RowBoatCop
Active Member
This build is incredible, so clean, and a genius move using sintra! I know it's a difficult material to work with so massive respect for that. Have you decided how you'll approach the undersuit? I've seen in a lot of builds large gaps between say the legs/codpiece that take away from the overall look, where the undercut is visible, interested to see what your solution is for that
JayCVenlo
Sr Member
As optimus prime said: Ebayyyyyy
JayCVenlo
Sr Member
scroll a few pages back. You will find a picture of the unpainted arm inlays.
the rest of the undersuit i dont know yet. I know there a member on here that 3d model a piece that goes over your schoulder. He might make a mold of it and cast it in rubber.
So i think that thats the best way, but rubber is not easy to paint or glue.
was it this The Flat Gold
Base - 55650 MOTIP
Topcoat - 55850 MOTIP
also thanks for responding. Your suit looks amazing
Similar threads
