okay, here is what I have so far of my Tomenosuke blaster. if you guys have questions and need more plmk, but get busy and there could be delays
The front behind the spacer on the water gun is "filled in" and some of that intersects with the spacer, so it is not a complete stand-alone cylinder. You could cut it, but then you would also have to fill on the inside to make something for the spacer to hold on to.the "Spacer" piece between the front barrel and magazine frame is removable and made of steel
A metal spacer would be a nice little upgrade for your water gun.
sorry for delay not sure if your done, but hope this helps you and others.
the Tomenosuke butt has a sharper edges versus water gun with soft edges.
measurements are in metric
12mm high and the end tip is 9mm. Get styrene sheets, clay, etc.. and stack till you get the exact size, seems easy.
https://images2.imgbox.com/95/f2/BEBvthG8_o.jpg
Thanks for the comparison pics @Getoninja :thumbsup
you'll like these pics. I picked up two set of grips (amber/clear) from two different Ebay sellers whom originally bought them from you. I guess they didn't need them for their projects.
Grips are from the Takagi water gun and have not been modded. Only took pictures to show how cool clear grips can look on finished water gun blaster.
But not sure if you also make clear grips from Tomen
https://images2.imgbox.com/3e/3b/6Xbqnf3q_o.jpg
https://images2.imgbox.com/88/12/U1OsCAyh_o.jpg
https://images2.imgbox.com/38/5e/977YdcuV_o.jpg
Thanks so much for the detailed pictures. I have saved these as reference for my upcoming blaster project.
I have a Coyle kit, but these will be incredibly useful.
Is the butt of the Tomen narrower than the water gun's? I've got the Tomen grips on and now the butt is wider on both sides...
View attachment 820697View attachment 820698