-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke Shared stunt Version Lightsaber ( Run Full )
- Thread starter Spirit of ob1
- Start date
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
#20 ALLEY
no anodizing for mine please.
I Also sent PayPal for my remaining balance owed today.
#20 ALLEY
no anodizing for mine please.
I Also sent PayPal for my remaining balance owed today.
Last edited:
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Okay,
I think everything is updated correctly, if im missing something let me know. also I have replied to all emails, if I missed you email me again plz.
Thanks
Okay,
I think everything is updated correctly, if im missing something let me know. also I have replied to all emails, if I missed you email me again plz.
Thanks
DarkJedi360
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
#3 NO anodizing for me thanks
#3 NO anodizing for me thanks
xwingercrash
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
I got my Slothfurnace clamp card. Ready for install!
Sent from my iPhone using Tapatalk
I got my Slothfurnace clamp card. Ready for install!
Sent from my iPhone using Tapatalk
canister
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
@xwingercrash does that come with the V2 on the back?
@xwingercrash does that come with the V2 on the back?
Last edited by a moderator:
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Nope. the other side is the Hero version.
Nope. the other side is the Hero version.
Last edited by a moderator:
xwingercrash
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
The V3 side is black and 7 gold stripes (pic in above post) and the opposite side is V2 (pic below). Brad just started making this version with the 7 gold stripes For V3.
There is another card that is black and 7 copper stripes stunt on one side and and black and 13 copper stripes hero on the other side.
Sent from my iPad using Tapatalk
The V3 side is black and 7 gold stripes (pic in above post) and the opposite side is V2 (pic below). Brad just started making this version with the 7 gold stripes For V3.
There is another card that is black and 7 copper stripes stunt on one side and and black and 13 copper stripes hero on the other side.
Sent from my iPad using Tapatalk
xwingercrash
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Yep just like mine. V2/ gold stunt. The other card is copper hero/copper stunt. And yes the gold looks awesome!
Sent from my iPad using Tapatalk
Yep just like mine. V2/ gold stunt. The other card is copper hero/copper stunt. And yes the gold looks awesome!
Sent from my iPad using Tapatalk
canister
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Well that was a short lived consideration, V2/stunt it is! Thank you chaps
3d chassis beginnings of what you most likely will see at pommel end. still a wip but getting close while my imagination works on the reveal section. Question when you do wiring do you like more room or something that looks cool and sacrifices a little room?
Well that was a short lived consideration, V2/stunt it is! Thank you chaps
3d chassis beginnings of what you most likely will see at pommel end. still a wip but getting close while my imagination works on the reveal section. Question when you do wiring do you like more room or something that looks cool and sacrifices a little room?
Pixelpiper
Well-Known Member
Re: Luke Shared stunt Version Lightsaber
Sure. I'm making it into a hybrid myself. Keep in mind that the various props used in the movie received different treatments, even having been cast from the same buck. Speculation that the V2 was further turned on a lathe to clean it up for example. There are differences in rib sizes/angles, paint schemes, weathering, hole placement, clamp placement, etc. Speaking only for myself, I see so much variation in some photos that I'm not convinced there were only two stunts seen in ROTJ (3 if you count that Yuma version) and the description you quoted above is somewhat limiting and contradicted by various scenes/photos as well. Put it this way, saber use in ROTJ seems to have been completely random/haphazard.
One thing no one seems to know (at least no one has documented it) is how these stunt sabers come apart. Being cast or otherwise, they were definitely cut open to fit the motors and wiring - it's not inconceivable that parts were swapped scene to scene which might account for some of the oddities in screen caps/photos.
In the end, there are accuracy issues with all reproductions so you can pretty much do whatever you want with them.
Sure. I'm making it into a hybrid myself. Keep in mind that the various props used in the movie received different treatments, even having been cast from the same buck. Speculation that the V2 was further turned on a lathe to clean it up for example. There are differences in rib sizes/angles, paint schemes, weathering, hole placement, clamp placement, etc. Speaking only for myself, I see so much variation in some photos that I'm not convinced there were only two stunts seen in ROTJ (3 if you count that Yuma version) and the description you quoted above is somewhat limiting and contradicted by various scenes/photos as well. Put it this way, saber use in ROTJ seems to have been completely random/haphazard.
One thing no one seems to know (at least no one has documented it) is how these stunt sabers come apart. Being cast or otherwise, they were definitely cut open to fit the motors and wiring - it's not inconceivable that parts were swapped scene to scene which might account for some of the oddities in screen caps/photos.
In the end, there are accuracy issues with all reproductions so you can pretty much do whatever you want with them.
Last edited by a moderator:
xwingercrash
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
A couple of other obvious visual differences are that the v2 has a nipple at the end of the emitter and the v3 does not; and in addition to the cone knob the v2 has the mystery chunk in the booster section as well.
Sent from my iPhone using Tapatalk
A couple of other obvious visual differences are that the v2 has a nipple at the end of the emitter and the v3 does not; and in addition to the cone knob the v2 has the mystery chunk in the booster section as well.
Sent from my iPhone using Tapatalk
Darth Fetty
Sr Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Payment sent for anodizing, clamp, and screen accurate holes. Looking forward to getting it in hand!
Payment sent for anodizing, clamp, and screen accurate holes. Looking forward to getting it in hand!
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
List updated,
Okay so we just need to anodize the ones that wanted it, and then drill the holes and we should be almost done!
Thanks everyone for helping me make this saber. Just like the Obi Crystal chambers I started off wanting one, but it was too expensive to just make one lol so I did a small run to be able to have it made. I appreciate everyone's ideas and comments. Even though I was not able to accommodate everyone ideas I hope you guys enjoy this version!.
Thanks guys for your patience and help!
List updated,
Okay so we just need to anodize the ones that wanted it, and then drill the holes and we should be almost done!
Thanks everyone for helping me make this saber. Just like the Obi Crystal chambers I started off wanting one, but it was too expensive to just make one lol so I did a small run to be able to have it made. I appreciate everyone's ideas and comments. Even though I was not able to accommodate everyone ideas I hope you guys enjoy this version!.
Thanks guys for your patience and help!
Similar threads
