-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke Shared stunt Version Lightsaber ( Run Full )
- Thread starter Spirit of ob1
- Start date
Goodie2325
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Thanks for the heads up. I've also had hands-on experience with it since I completed a SH V2 with a master chassis, bar graph, etc... so I know what you mean about the hassle of it but I was just curious. I don't plan on doing this build anyway until something comes out for it. I look forward to seeing what develops once these are released.
Thanks for the heads up. I've also had hands-on experience with it since I completed a SH V2 with a master chassis, bar graph, etc... so I know what you mean about the hassle of it but I was just curious. I don't plan on doing this build anyway until something comes out for it. I look forward to seeing what develops once these are released.
Pixelpiper
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
I also didn't mean to dissuade someone from hacking or re-purposing some other chassis for this hilt - it's mainly that there are likely better alternatives than the Goth SHv2 chassis.
I also didn't mean to dissuade someone from hacking or re-purposing some other chassis for this hilt - it's mainly that there are likely better alternatives than the Goth SHv2 chassis.
Goodie2325
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Please, no worries. I'll be happy to pick up whichever alternative comes along once these are out and about. I'm just excited to receive it. I really wasn't looking forward to drilling holes through my new hilt to begin with. It looks too pretty to do something like that, even if the clamp would cover it up. Thanks again Pixelpiper.
Please, no worries. I'll be happy to pick up whichever alternative comes along once these are out and about. I'm just excited to receive it. I really wasn't looking forward to drilling holes through my new hilt to begin with. It looks too pretty to do something like that, even if the clamp would cover it up. Thanks again Pixelpiper.
canister
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Oh man this is going to be so exciting!
Once it arrives I will print out a prototype chassis and test it. May take a little longer for me to get mine as I'm in NZ so will look longingly at the wave of arrival pics until mine gets here.
Oh man this is going to be so exciting!
Once it arrives I will print out a prototype chassis and test it. May take a little longer for me to get mine as I'm in NZ so will look longingly at the wave of arrival pics until mine gets here.
Liquid Cobra
New Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Which clamp card from slothfurnace is the appropriate/accurate one for this build?
Which clamp card from slothfurnace is the appropriate/accurate one for this build?
xwingercrash
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
The middle one. Black and gold.
Sent from my iPad using Tapatalk
The middle one. Black and gold.
Sent from my iPad using Tapatalk
Liquid Cobra
New Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Awesome thanks!
Awesome thanks!
russellsch
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
They look absolutely gorgeous!!!
I just want to thank you, Spirit of Ob1, for all your hard work. :cheers
These babies are gonna be spectacular!
They look absolutely gorgeous!!!
I just want to thank you, Spirit of Ob1, for all your hard work. :cheers
These babies are gonna be spectacular!
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Final drilling on clamps and top of saber
Final drilling on clamps and top of saber
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Hey guys,
So we are finally coming to then end, I just wanted to take time to thank everyone again for joining the run. I need to collect final payments.
Come to find out each hole needed to be drilled one at a time due to the fact that the placement/where they needed to be. so it is taking longer
than expected. But i think when we first started the run back at the end of DEC. and we are now mid march isnt really that long. Not to mention They were still in the middle of making my second batch of Crystal chambers and also doing Romans MK1 and the new saber he released as well. and then had to wait for the anodizing company to send them back. Basically i just wanted to say thanks for your patience. I know its a lot but the parting of the saber/drilling/anodizing/Buffing its alot and i did not want it rushed!.. and we are almost done. all that is left is the polishing but i will ship out those that are not polished asap!
Thanks again Guys! hope everyone likes them.
Hey guys,
So we are finally coming to then end, I just wanted to take time to thank everyone again for joining the run. I need to collect final payments.
Come to find out each hole needed to be drilled one at a time due to the fact that the placement/where they needed to be. so it is taking longer
than expected. But i think when we first started the run back at the end of DEC. and we are now mid march isnt really that long. Not to mention They were still in the middle of making my second batch of Crystal chambers and also doing Romans MK1 and the new saber he released as well. and then had to wait for the anodizing company to send them back. Basically i just wanted to say thanks for your patience. I know its a lot but the parting of the saber/drilling/anodizing/Buffing its alot and i did not want it rushed!.. and we are almost done. all that is left is the polishing but i will ship out those that are not polished asap!
Thanks again Guys! hope everyone likes them.
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Sent from my Pixel XL using Tapatalk
Thanks for a great 1st project run. Appreciate all the updates and time you've put in
Sent from my Pixel XL using Tapatalk
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Banthapudu4788
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Is it possible to see a full saber body shot? A clamp installed if you feel so inclined to do so.[emoji16]
Is it possible to see a full saber body shot? A clamp installed if you feel so inclined to do so.[emoji16]
Spirit of ob1
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Ill ask them to send me one. The shop are the ones who are sending me the pics lol
Ill ask them to send me one. The shop are the ones who are sending me the pics lol
cboath
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
right click and open in tab - it's a video
right click and open in tab - it's a video
Javinder
New Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Is anyone who is going to receive one of this beauties planning to "age" theirs, i.e., adding nicks, paint chipping, weathering, etc? I have an idea of what I'd like to do, nothing too severe but just give it a little "used" look.
Is anyone who is going to receive one of this beauties planning to "age" theirs, i.e., adding nicks, paint chipping, weathering, etc? I have an idea of what I'd like to do, nothing too severe but just give it a little "used" look.
Last edited:
OBIWANJALOPY
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Man, everything looks terrific.
Man, everything looks terrific.
Similar threads
