Infinity War, Show your marvel props collections

What would you say is the best Cap Shield out there then?

I say EFX BECAUSE it's based on a stunt shield and has that history to why it is the way it is. I actually like that about this one because it's a good story.

Personally for me I'm after the licensed ones so that's why they are up there for me as there are no other licensed shields that come close to either EFX or KA.

Sure KA is cast, stamped and the paint job isn't 100% accurate but it still IS metal and looks great.

But again, I'm curious to know what you consider the definitive Cap Shield that is currently available.

King Arts isn’t metal.

It’s a cast resin alloy that has metal in it
I’ve seen one snapped- and there’s resin in there.
 
Don’t know about best, but my shield is easily my favorite.

2292A1A7-B6D3-4060-81A5-2A2624950CF2.jpeg
4B686B90-49D4-448E-99B3-BB9EB4E9B6EE.jpeg
6045AB92-50B7-43CC-BF64-46DDA333FD05.jpeg
02476C80-C105-4376-896E-5F821B01C7AE.jpeg
2B383F8F-171F-49C9-BF13-8D6F801A8878.jpeg
74D92074-1719-428A-A87C-4751D9C4B1C2.jpeg
E832483A-ACB7-42DA-8417-3462935A8D79.jpeg
2591D583-40A0-4C83-A2BA-1504435E400A.jpeg
 

Attachments

  • F1499056-2AE5-414F-A032-F29109B025A0.jpeg
    F1499056-2AE5-414F-A032-F29109B025A0.jpeg
    1.5 MB · Views: 93
For now I bought a cattoys metal hammer and wanna cut the 2 lines on both sides + weathering when I find the time.
Also have a 75th Anniversary shield...both not 100% screenaccurate but very nice for now.
The Hasbro Hammer is more accurate..but I hate the cheap feeling and all the buttons.

39564165uh.jpg
 
I recently added these to my collection. Henry Creation’s V2 Star-Lord blaster files, printed on my Elegoo Saturn and finished by myself.

I had some really good photos of the stunt blasters that I referenced for these. Over did the heat scorching a bit, but otherwise I’m quite happy. Now to make some stands..
 

Attachments

  • 90323F8E-9ED9-4BA5-8FB7-AE487C7E4196.jpeg
    90323F8E-9ED9-4BA5-8FB7-AE487C7E4196.jpeg
    4.6 MB · Views: 150
  • C99C316D-2895-40BD-A37E-FF95B682EAA2.jpeg
    C99C316D-2895-40BD-A37E-FF95B682EAA2.jpeg
    2.9 MB · Views: 136
  • 4CC2F5FE-FA5D-480D-A4D5-6AA549C9627B.jpeg
    4CC2F5FE-FA5D-480D-A4D5-6AA549C9627B.jpeg
    7.4 MB · Views: 123
  • A5AC9BBD-74E0-4E8B-82BC-16E41962216D.jpeg
    A5AC9BBD-74E0-4E8B-82BC-16E41962216D.jpeg
    6.8 MB · Views: 115
  • 0B3F1175-85B3-4992-9A71-4CCD30B8BA67.jpeg
    0B3F1175-85B3-4992-9A71-4CCD30B8BA67.jpeg
    2.7 MB · Views: 122
  • 1DFA9196-DB0C-470F-A433-A6B294DC1396.jpeg
    1DFA9196-DB0C-470F-A433-A6B294DC1396.jpeg
    2.1 MB · Views: 146
I recently added these to my collection. Henry Creation’s V2 Star-Lord blaster files, printed on my Elegoo Saturn and finished by myself.

I had some really good photos of the stunt blasters that I referenced for these. Over did the heat scorching a bit, but otherwise I’m quite happy. Now to make some stands..

Outstanding work. As always
 
Hahah
No real story
I bought one and used a freight forwarder and they reboxed it’s to send to me (!!)
Removing the foam and shipping it just in a box

It arrived and clearly something had happened on the way and it had snapped along a third of it
Was tragic but also enlightening
Really! Did you take photos?

I was curious if only the front was metal with the back being cast and simply screwed together.
 
here are 2 mjolnirs that ive upgraded.

King Arts

- stripped paint and polished
- filled with cement
- weathered

DSC02156-01.jpeg



Museum Replicas

- tooled out silver painted chevrons
- hand hammered real metal chevrons
- filled with cement
- weathered


DSC02721.jpg
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top