-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Han In Carbonite (HIC) Volvo panel set
- Thread starter Bigturc
- Start date
Bigturc
Sr Member
Hey Mike,
Yeah, sorry about that .. I've been away doing my own HIC every single minute of free time I have.
There's 2 things happening here:
1. I'm currently doing a new mold to cast panels.
2. I still have my last mold with a slight extra material in the rounded corner (see post 299)
I'm debating right now if the new batch will have the same price, or if I do a small rebate for those who'll get the cast from mold #7 (post 299). It's just a little sanding to remove the extra material, but still. More news as soon as that mold is done.
For those 3 last guys on the list, do you mind the small resin to sand down?
Yeah, sorry about that .. I've been away doing my own HIC every single minute of free time I have.
There's 2 things happening here:
1. I'm currently doing a new mold to cast panels.
2. I still have my last mold with a slight extra material in the rounded corner (see post 299)
I'm debating right now if the new batch will have the same price, or if I do a small rebate for those who'll get the cast from mold #7 (post 299). It's just a little sanding to remove the extra material, but still. More news as soon as that mold is done.
For those 3 last guys on the list, do you mind the small resin to sand down?
Bigturc
Sr Member
*** Update ***
I know you've been impatient to send me your money, but it's getting much closer now! I received molding material this weekend and finished my mold last night. Panels are currently baking and I'll be back full steam on these.
There will be, again, 2 grades that I'm gonna sell, the previous one with a corner that needs some sanding, and the new ones. The set that needs attention will have a couple $$$ shaved, to help those that needs a money break. First post will be updated with the pricing as soon as I'm ready sending them.
I don't ask money until sets are ready to ship, for those still on the list, more importantly the next in line, please send me a PM to tell me you're still interested. When I have a set ready, I'll take the first to pay so that I don't wait on people who might bail out when it's time to pay.
I know you've been impatient to send me your money, but it's getting much closer now! I received molding material this weekend and finished my mold last night. Panels are currently baking and I'll be back full steam on these.
There will be, again, 2 grades that I'm gonna sell, the previous one with a corner that needs some sanding, and the new ones. The set that needs attention will have a couple $$$ shaved, to help those that needs a money break. First post will be updated with the pricing as soon as I'm ready sending them.
I don't ask money until sets are ready to ship, for those still on the list, more importantly the next in line, please send me a PM to tell me you're still interested. When I have a set ready, I'll take the first to pay so that I don't wait on people who might bail out when it's time to pay.
Bigturc
Sr Member
*** UPDATE ***
New run of panels is started!!! Price and details got adjusted in the first post. If you have question, please PM me.
I have almost 3 complete sets ready to ship so I'll be able to take payments right now. Those on the list, please send me your complete shipping info so I can give you an actual total cost. It's gonna be first come first serve in payment order so that I don't wait on people bailing silently.
New run of panels is started!!! Price and details got adjusted in the first post. If you have question, please PM me.
I have almost 3 complete sets ready to ship so I'll be able to take payments right now. Those on the list, please send me your complete shipping info so I can give you an actual total cost. It's gonna be first come first serve in payment order so that I don't wait on people bailing silently.
Bigturc
Sr Member
*** SPECIAL PRICE FOR 48 hours ***
Anyone paying in the next 48 hours will have the previous run price of 315$. That includes people already on the list or any new builder ready to pay. After that, it's the new 345$ price. This is BY FAR the cheapest price for nice quality panels you'll find.
You will pay shipping only when I am ready to ship.
I'm doing this mostly because some people had already given interest at the 315$ price point so I felt bad growing the price at this moment. But this won't last.
I'm casting them everyday so depending on the order of payment, it might ship in the next days!
Anyone paying in the next 48 hours will have the previous run price of 315$. That includes people already on the list or any new builder ready to pay. After that, it's the new 345$ price. This is BY FAR the cheapest price for nice quality panels you'll find.
You will pay shipping only when I am ready to ship.
I'm doing this mostly because some people had already given interest at the 315$ price point so I felt bad growing the price at this moment. But this won't last.
I'm casting them everyday so depending on the order of payment, it might ship in the next days!
Re: Han In Carbonite (HIC) Volvo panel set *** SPECIAL PRICE for 48h if you pay now!
Hi - glad to see you are back in production! I was on the original list and still want to get these with the new mold. When do I need to send payment?
Sent from my iPhone using Tapatalk
Hi - glad to see you are back in production! I was on the original list and still want to get these with the new mold. When do I need to send payment?
Sent from my iPhone using Tapatalk
Bigturc
Sr Member
Re: Han In Carbonite (HIC) Volvo panel set *** SPECIAL PRICE for 48h if you pay now!
PM sent!
PM sent!
Bigturc
Sr Member
Re: Han In Carbonite (HIC) Volvo panel set *** SPECIAL PRICE for 48h if you pay now!
*** UPDATE ***
I have a set of "b-grade" panels ready to go. These are my normaly A-grade that got a small corner tore in the mold. Because of that, I'm letting it go as if the price was still 315$ for the set. This is the last set at that price .. next one of these b-grade will be 315$. Check the pics in my junkyard threads.
This set is cast, in hand and ready to go!
PM me if you're interested in having that one set.
*** UPDATE ***
I have a set of "b-grade" panels ready to go. These are my normaly A-grade that got a small corner tore in the mold. Because of that, I'm letting it go as if the price was still 315$ for the set. This is the last set at that price .. next one of these b-grade will be 315$. Check the pics in my junkyard threads.
This set is cast, in hand and ready to go!
PM me if you're interested in having that one set.
Bigturc
Sr Member
Re: Han In Carbonite (HIC) Volvo panel set *** SPECIAL PRICE for 48h if you pay now!
For all those interested in the panels, make sure to check my greeblies thread and update me if you want anything more from there. I just updated the list of parts available with pictures .. most are cast from original parts. Some parts are in limited quantities so it's first come first serve.
For all those interested in the panels, make sure to check my greeblies thread and update me if you want anything more from there. I just updated the list of parts available with pictures .. most are cast from original parts. Some parts are in limited quantities so it's first come first serve.
