Update 6/15/23: Accepting downpayments from 6/15 thru 7/7
Update 7/7/23: Production started
UPDATE 8/28/23: Hilts packed and will be shipping to us this week. Once recieved they will be inspected.
UPDATE 9/13/23: Hilts Recieved, Currently inspecting all of them. Notifications for final payment will begin shortly after inspection.
UPDATE 9/21/23: Notificaitons sent for final balance to empty hilt ownwers
UPDATE 9/28/23: Shipping to customers started. Empty hilts for now.
The Youngling Protector
It's 19 BBY and the new Emperor Sheev Palpatine has issued an executive Order to wipe out all the Jedi. As Order 66 spreads through the galaxy, the most important location and quite possibly the most heavily guarded one is the Jedi Temple in Coruscant. Palpatine knows his grand army is not capable of taking down the Jedi temple so he sends his newly appointed apprentice "Lord Vader" for this task. Accompanied by his personal guard the 501st Legion, Vader raids the temple, executing every Jedi in sight. There is little to no hope of survival but the Jedi do not give up, as troops march through hallways with their blasters, Jedi defend and protect with the future of their religion. Word spreads that several Naboo ships are aiding the Jedi to escape the invasion. The few Jedi left know that they must protect their younglings, no matter the cost. "Get the elevator, get the youngling to Kelleran, Go!" - these were the last words of a fallen Jedi, while she gave up her life for the child. Her mission was over, the child was safe in the elevator along with her remains and Lightsaber. The youngling was terrified and hopeless, too young to understand what had happened. Eyes focused on the elevator doors, uncertain of what will be on the other side. Doors finally open and a familiar face appears - "Everything is going to be alright kid" as Master Kelleran Beq picks up the Youngling Protector's lightsaber and as they step out of the elevator more troopers arrive. The Sabered hand, as they called the Master, uses ignites both sabers while the clone army initiates in combat. Their blaster fire is no match to his abilites with the saber, defleacting each laser beam to themselves. Skillful and swift he ends the clone squad one by one as he escapes along with the child. The future of the Jedi is safe for now.
Project intro
Hello, and thanks for your interest on the Youngling protectors' hilt run (YP for short). My name is Gustavo Canales, co-owner of Laredo Sabers. Even though this is my first run that I have personally organized, I have been part of many projects in collaboration with other companies for many years. A few examples are: Phoenix Props Kylo V1, V2 and The Light. Saberbay's Darksaber Live Action, Dark Matter and Geonobi, etc.
I have learned a lot over the years and have fine tuned the process of product design and manufacturing. I am a consumer and collector too so I understand that we want it to be accurate, instal friendly and cost friendly. I also understand that it needs to feel like a real collectible product, but have a few options for those DIY folks. I can't do this alone so I gathered a team of people that will support this project by adding their skills and tallent. They are key in making this a complete product build and not just another DIY. So I hope this project speaks to you and you have a great experience with us, we are sure you are going to love the Youngling Protector's Saber.
This Run will have a minimum of 50 units produced, and if you want one we will put you on the list and send you the payment details once the down payments are required. We will be offering install and weathering services too. Feel free to ask anyquesitons you might have in this thread, but please do not come to promote someone elses product, as it will be it will be eliminated.
More info of this hilt here: Jedi lightsaber from BOBF and Mando Season 3
Core team
Gustavo Canales - Design, manufacturing & project lead
Roberto Lara - Logistics and Finance
Giovanny Fernandez - Install service
Matt Slate - Finishing and weathering service
Christian Cruz - Product artwork & Plaque
Pricing and Options
Base Hilt includes
Basic install includes
Advanced Install includes
Weathering service includes
Lead times:
Interest list will begin on 6/6 thru 6/23
Down payments will be requested from 6/15 thru 7/7
Hilt manufacturing: 30 days after all downpayments are received
Base hilt orders: The ones that do not require install or weathering service will be shipped withing the next 2 to 3 weeks once received from the shop. These will be thoroughly inspected before shipping.
Chassis Install: 1 or 2 days per hilt times the ammount of hilts requested. Installs will all be shipped together to save up in shipping.
Weathering: 3 days per hilt times the ammount of hilts requested. Hilts will be shipped once a week in a first come first serve manner.
Payment terms:
Shipping will be done from USA to your destination, this will include tracking number, you can also insure the YP at an additional cost. We will ship world wide but you are responsible of verifiying your country's importing fees or taxes before arrival, please understand that this is not under our control. Shipping cost will be calculated and provided to you before the final payment is done.
Additional Notes:
Book of Boba fett Order 66 flashback
Mandalorian Season 3 Order 66 flashback
Prototype images:
Main hilt
Advanced Installed Hilt
Hidden feature for kyber Reveal
Size reference images
2 types of pommel caps, Vented and non Vented included
Chassis renders
Basic
Advanced
Weathered version
Box Images
Name plaque images
Updated 6/12/23: Added 2 styles of pommel caps, vented and non vented. No extra cost.
Updated 6/13/23: Added weathered pics.
Updated 6/17/23: Added plaque images.
Updated 7/6/23: Payment to the machine shop was completed today (a day early). Plaques paid and ordered. Components for installs ordered. Production will begin shortly.
Updated 8/2/23: Pictures of Box and Plaques added.
Thank you very much for your interest and hope you join us in this Run.
Update 7/7/23: Production started
UPDATE 8/28/23: Hilts packed and will be shipping to us this week. Once recieved they will be inspected.
UPDATE 9/13/23: Hilts Recieved, Currently inspecting all of them. Notifications for final payment will begin shortly after inspection.
UPDATE 9/21/23: Notificaitons sent for final balance to empty hilt ownwers
UPDATE 9/28/23: Shipping to customers started. Empty hilts for now.
The Youngling Protector
It's 19 BBY and the new Emperor Sheev Palpatine has issued an executive Order to wipe out all the Jedi. As Order 66 spreads through the galaxy, the most important location and quite possibly the most heavily guarded one is the Jedi Temple in Coruscant. Palpatine knows his grand army is not capable of taking down the Jedi temple so he sends his newly appointed apprentice "Lord Vader" for this task. Accompanied by his personal guard the 501st Legion, Vader raids the temple, executing every Jedi in sight. There is little to no hope of survival but the Jedi do not give up, as troops march through hallways with their blasters, Jedi defend and protect with the future of their religion. Word spreads that several Naboo ships are aiding the Jedi to escape the invasion. The few Jedi left know that they must protect their younglings, no matter the cost. "Get the elevator, get the youngling to Kelleran, Go!" - these were the last words of a fallen Jedi, while she gave up her life for the child. Her mission was over, the child was safe in the elevator along with her remains and Lightsaber. The youngling was terrified and hopeless, too young to understand what had happened. Eyes focused on the elevator doors, uncertain of what will be on the other side. Doors finally open and a familiar face appears - "Everything is going to be alright kid" as Master Kelleran Beq picks up the Youngling Protector's lightsaber and as they step out of the elevator more troopers arrive. The Sabered hand, as they called the Master, uses ignites both sabers while the clone army initiates in combat. Their blaster fire is no match to his abilites with the saber, defleacting each laser beam to themselves. Skillful and swift he ends the clone squad one by one as he escapes along with the child. The future of the Jedi is safe for now.
Project intro
Hello, and thanks for your interest on the Youngling protectors' hilt run (YP for short). My name is Gustavo Canales, co-owner of Laredo Sabers. Even though this is my first run that I have personally organized, I have been part of many projects in collaboration with other companies for many years. A few examples are: Phoenix Props Kylo V1, V2 and The Light. Saberbay's Darksaber Live Action, Dark Matter and Geonobi, etc.
I have learned a lot over the years and have fine tuned the process of product design and manufacturing. I am a consumer and collector too so I understand that we want it to be accurate, instal friendly and cost friendly. I also understand that it needs to feel like a real collectible product, but have a few options for those DIY folks. I can't do this alone so I gathered a team of people that will support this project by adding their skills and tallent. They are key in making this a complete product build and not just another DIY. So I hope this project speaks to you and you have a great experience with us, we are sure you are going to love the Youngling Protector's Saber.
This Run will have a minimum of 50 units produced, and if you want one we will put you on the list and send you the payment details once the down payments are required. We will be offering install and weathering services too. Feel free to ask anyquesitons you might have in this thread, but please do not come to promote someone elses product, as it will be it will be eliminated.
More info of this hilt here: Jedi lightsaber from BOBF and Mando Season 3
Core team
Gustavo Canales - Design, manufacturing & project lead
Roberto Lara - Logistics and Finance
Giovanny Fernandez - Install service
Matt Slate - Finishing and weathering service
Christian Cruz - Product artwork & Plaque
Pricing and Options
- The YP base price is $200 usd plus shipping.
- Basic Install $200 (includes shipping cost from provider to Laredo Sabers)
- Advanced Install $260 (includes shipping cost from provider to Laredo Sabers)
- Weathering service $50 ($40 for service + $10 for shipping from Laredo Sabers to Provider)
Base Hilt includes
- Full Aluminum & Brass hilt designed by Laredo Sabers
- Extra screws and allen wrenches
- Free basic chassis STL so you can print at home
- 3d printed greeblies (5mm and 3mm led caps)
- Product box designed by Christian Cruz
- Plaque by Christian Cruz
Basic install includes
- Basic 3d printed chassis (PLA)
- Rechargeable Battery
- Proffie board with 12+ fonts (includes custom YP font by Laredo Sabers)
- Neopixel blade connector
- 24mm speaker
- Kill switch
Advanced Install includes
- Advanced 3d printed chassis (PA12 nylon) with Crystal chamber
- 3d printed inner grip replacement for full chassis reveal
- Rechargeable Battery
- Proffie board with 12+ fonts (includes custom YP font by Laredo Sabers)
- Neopixel blade connector
- Pixel Illuminated Kyber crystal
- 2 Pixel Accents
- 24mm speaker (Changed from 28mm due to space limitations)
- Kill switch
Weathering service includes
- Sanding, painting & buffing to make it look similar to the show.
Lead times:
Interest list will begin on 6/6 thru 6/23
Down payments will be requested from 6/15 thru 7/7
Hilt manufacturing: 30 days after all downpayments are received
Base hilt orders: The ones that do not require install or weathering service will be shipped withing the next 2 to 3 weeks once received from the shop. These will be thoroughly inspected before shipping.
Chassis Install: 1 or 2 days per hilt times the ammount of hilts requested. Installs will all be shipped together to save up in shipping.
Weathering: 3 days per hilt times the ammount of hilts requested. Hilts will be shipped once a week in a first come first serve manner.
Payment terms:
- 50% downpayment for Hilt manufacturing is required. Downpayment is non refundable
- 50% Balance of hilt needs to be covered before shipping to customer or weathering service
- 50% downpayment for chassis Install is required. Downpayment is non refundable
- 50% Balance of chassis install needs to be covered before shipping to customer or weathering service
- Weathering needs to be paid in full once production ends and hilts re received from the factory
- Shipping cost will be calculated based on options and needs to be covered before the product is actually shipped.
Shipping will be done from USA to your destination, this will include tracking number, you can also insure the YP at an additional cost. We will ship world wide but you are responsible of verifiying your country's importing fees or taxes before arrival, please understand that this is not under our control. Shipping cost will be calculated and provided to you before the final payment is done.
Additional Notes:
- Payments for the hilts, install downpayment and shipping are done to Laredo Sabers: Paypal larajr78@gmail.com
- Final Payment for Install is done to Gio Fernandez: Paypal jgiovannyfernandez@gmail.com
- Payments for the Weathering service are done to Matt Slate: Paypal matt.slate2012@gmail.com
- Special requests for installs and weathering, please contact Gio or Matt directly.
- Cost may vary over time if you did not secure a spot in this Run.
Book of Boba fett Order 66 flashback
Mandalorian Season 3 Order 66 flashback
Prototype images:
Main hilt
Advanced Installed Hilt
Hidden feature for kyber Reveal
Size reference images
2 types of pommel caps, Vented and non Vented included
Chassis renders
Basic
Advanced
Weathered version
Box Images
Name plaque images
Updated 6/12/23: Added 2 styles of pommel caps, vented and non vented. No extra cost.
Updated 6/13/23: Added weathered pics.
Updated 6/17/23: Added plaque images.
Updated 7/6/23: Payment to the machine shop was completed today (a day early). Plaques paid and ordered. Components for installs ordered. Production will begin shortly.
Updated 8/2/23: Pictures of Box and Plaques added.
Thank you very much for your interest and hope you join us in this Run.
Last edited:
