gotmeth366:
Got a bit bored and decided to get the red Prada logo off the VPS 53e left lens.
View attachment 1040512
I used Autoglym super resin polish that I had lying around.
I recommend removing the lens, so you don't get any polish on the matt frame.
There are 3 small screws that hold the "top bar rubber section" to the lower frame. It's much easier to remove the lens with this taken off. Be very careful to not mark the frame with the screwdriver as the top section looks like it is only "coated" in rubber.
If you didn't want to strip down the glasses, you could I suppose, use masking tape to protect the frame.
If you use the polish with a white cloth, you will see the red slowly coming off. It takes a little while, but it will all come off with approx. 10-15 mins. of rubbing.
Only thing is, there still is an ever so slight miniscule "clear shadow" of the logo, almost melted into the lens, which could possibly be from a heat stamping process when the logo is initially put on. It's really not noticeable at all though, so much so, I couldn't quite get a pic showing it!
View attachment 1040513
It will certainly suffice until I decide on changing the lenses.
It might seem a little bit daunting, but 15 mins. work and I got to wear them all day!!