-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Interest BLADERUNNER Tomenosuke Direct replacement Steel Cylinders and Barrels
- Thread starter APOLLO IND
- Start date
Bump
Hello all! It has been quite a minute here!
This interest list never ended up meeting the minimum requirements for my machinist to take on the project. Unfortunately his schedule has been booked quite far out at this point and rather than try to offer something I simply can’t deliver on, I no longer want to drag this out any longer. (This is why we do interest lists before taking money
)
Now I have had member Teddz reach out to me letting me know he has started on his project for the blasters, which includes work on steel cylinders and barrels. I haven’t done business with Teddz personally nor am I necessarily endorsing him, but this may be something to consider if you’d like to complete your blasters with steel parts as planned. I have had a discussion with him, and gave him permission to link that run on this thread.
I’m sorry all of you who have waited patiently, and this never came to fruition. All is good though, and I hope another run can fulfill those finishing touches to your blasters!
-Ariston
This interest list never ended up meeting the minimum requirements for my machinist to take on the project. Unfortunately his schedule has been booked quite far out at this point and rather than try to offer something I simply can’t deliver on, I no longer want to drag this out any longer. (This is why we do interest lists before taking money
) Now I have had member Teddz reach out to me letting me know he has started on his project for the blasters, which includes work on steel cylinders and barrels. I haven’t done business with Teddz personally nor am I necessarily endorsing him, but this may be something to consider if you’d like to complete your blasters with steel parts as planned. I have had a discussion with him, and gave him permission to link that run on this thread.
I’m sorry all of you who have waited patiently, and this never came to fruition. All is good though, and I hope another run can fulfill those finishing touches to your blasters!
-Ariston
Thanks Ariston but I think he has finished his run of these a while back now; I was lucky to get in on them with him when his run was active. His communication was excellent with me and I got the barrels and cylinders very quickly! I would endorse him if he does another project in case someone is looking for a recommendation that is!!
I've started making the cylinders again. There's more coming for the TomenosukeThanks Ariston but I think he has finished his run of these a while back now; I was lucky to get in on them with him when his run was active. His communication was excellent with me and I got the barrels and cylinders very quickly! I would endorse him if he does another project in case someone is looking for a recommendation that is!!
Hey I'm interested in both a barrel and a cylinder without blueingBLADERUNNER STEEL BARRELS AND CYLINDERS
Hello everyone!
Now, I know there have been a few folks who have done runs of these, so I’m not intending to impend upon that, or our talented machinist members. I own one of these myself and it's great! The intention of this project is to have a solid offering made in the U.S. in a timely manner, so those who are just building their first blaster, or those who are building another, (or those who can't stop building) have a reliable source to get the quality parts they need. This will be modeled based on the Tomenosuke parts, making tweaks where necessary staying in line with the World Con hero blaster. The barrel will be only half bored, and the cylinder is only a replica as well, for obvious reasons. This run can only happen if we hit the minimum order of 20 cylinders and barrels. This will require a 50% deposit upon confirmation of all 20 cylinders. PLEASE ONLY SIGN UP IF YOU ARE ABLE TO PURCHASE UPON CONTACT.
Cylinders will be offered in Steel, and Black Oxide Blued finish Steel.
OFFICIAL PRICING:
STEEL CYLINDER: $145
BLUED STEEL CYLINDER: $155
STEEL BARREL: $85
BLUED STEEL BARREL: $95
+Postage (will be calculated according to location to prevent overcharging)
If you are interested,
please comment with what finish and how many you'd like
A side note mentioned to me, Steel Cylinders are not permitted in the UK. The Barrels will be half-bored, and the cylinders will not be readily convertible to a real firearm. If you decide to order one, please make sure you understand your local laws and that this run, should you add your name to have one shipped, will be at your own risk. The cylinder, combined with a half-bored barrel, cannot readily be converted into a firearm. According to GOV.UK, "An import license is not required to import replica firearms into the UK as long as they are not readily convertible to fire live ammunition. A firearm is considered to be “Readily convertible” if it can be converted without any special skill or using articles in general use."
Thanks everyone, keep building!
INTEREST LIST:
1.) dcast x1 Cylinder+Barrel
2.) dcarty x1 Cylinder
3.) ventuoguy x2 Cylinder+Barrel
4.) Lanboy x1 Barrel BLUED
5.) Gregatron x1 Cylinder+Barrel
6.) Vanitas x1 Cylinder+Barrel
7.) TempleCat x1 Cylinder
8.) wannab x2 cylinder BLUED x1 barrel BLUED
9.) ApostleofColor x1 Cylinder BLUED
10.) Darth Infamous x1 Cylinder
11.) Taylor Jean x1 Cylinder Blued x1 Barrel blued
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)
He's passed on his run to me. If you want Anders parts, let me know.
Non blued cylinder and barrel
Would love a steel cylinder but have you ever sent to uk thanks.
In for a blued steel cylinder for my Tomenosuke. Thanks
Am I able to order 2 of each -2 non blued cylinders and 2 non blued barrels?
Hello sir, if you are still making these, I would be interested in a barrel and cylinder blued
Similar threads
