That is pretty cool!
How much did all that t-track cost?Here's my custom E-11 Sniper Rifle. Plans based on a regular E-11, lengthened considerable, modern tactical grip modified to resemble Sterling folding stock. 3D printed F-11D rear stock, cheap chinese scope and bipod.
[url]http://i1186.photobucket.com/albums/z380/SithLord007/E-11%20Sniper/P1030630_zpsbv8oumtq.jpg[/URL][url]http://i1186.photobucket.com/albums/z380/SithLord007/E-11%20Sniper/P1030627_zpstnkfkzgo.jpg[/URL]
This one is before paint, but actually looks quite nicely weathered now that I re-look at my photos
[url]http://i1186.photobucket.com/albums/z380/SithLord007/E-11%20Sniper/P1030519_zpsep24ukry.jpg[/URL]
How much did all that t-track cost?
Good choice! Turned out great too!Thanks guys. Full build is over on FISD if you wanted to check it out further. http://www.whitearmor.net/forum/topic/34692-e-11s-sniper-rifle/
Don't ask! I got 2 quotes from know suppliers. They were craaaaazy! So I just made them out of 2mm styrene. Considering the blaster isn't screen accurate I didn't think the t-tracks needed to be mm perfect
View attachment 678259
So I'm waiting for my Mauser base to get here and I was messing around with the DEC TFA parts and I put it on my metal airsoft 1911. I'm pretty happy with the result
Sent from my iPhone using Tapatalk
1911 is my favorite pistol. you made this look awesome! it looks like something that came right off the screen! i love everything about it!
Nice... Planning on making a few blasters. Don't know what to use as a base.
I have a bag of parts to do one of these, but I put it on the back burner. I was a little stumped at how to attach the scope and barrel to the base trigger group/lower grip section...This is still my favorite custom. It inspired at least two RPF members to make their own, which honors me greatly.
The Vader rod later broke off, and I like it better without it.
OMG I remember building that snubby Nerf Sterling based rebel blaster for you years back! With a real screen used sight from the movie "Gamer", I think? The A.R.M.S. Mount from that sight alone is worth something like $75. Still looks great!!here are two I did...
[url]http://i196.photobucket.com/albums/aa176/nyreaper/mprops004a_zpsbee18e14.jpg[/URL]
[url]http://i196.photobucket.com/albums/aa176/nyreaper/mprops003a_zps395aec10.jpg[/URL]
and one someone did for me....
[url]http://i196.photobucket.com/albums/aa176/nyreaper/scp018a.jpg[/URL]
How suitable are the Star Wars Nerf Blasters for this?
I have a bag of parts to do one of these, but I put it on the back burner. I was a little stumped at how to attach the scope and barrel to the base trigger group/lower grip section...
Thanks for the tips!I drilled a hole side-to-side through the rear foot of the scope and ran a rod through it, which goes thru the two holes in the back/top of the receiver. Front foot just glued in. WookieGroomer, I think it was, actually machined an insert that pops right into the receiver and somehow attaches to the scope feet. Elegant.
My barrel is also just glued in I'm afraid...