Tom Clancy's The Division (original character build)

my question is, how are you guys getting your weapons there, I'm trying to find a bag big enough to put my rifle in lol

When your in the car just put a blanket or like something over the gun, at the convention center just make sure you go to weapons check hahahahaha

Biscuitbutcher pretty much took the words right out of my mouth. So long as your airsofts have the orange tip on them, you should have no problem walking from wherever you're staying to the convention center. Trust me, you won't be the only dude wearing an arsenal going there. ;)

I usually carry my M4 in a bag, but I'm just putting it and all the gear in the backseat and gearing up in the parking lot Sunday morning before walking in.

- - - Updated - - -

Any tips on the DZ bag? I cant believe how hard its to get a close enough bag these days!

You gotta make them yourself, my friend.

Wait 'til you get a load of mine!

I started designs on it during E3 after getting to play the demo and meet some of the developers. One of them saw my sketches and was like "Dude, how much time have you spent playing the demo? You know way too many details to that thing!" (funny thing was, I'd only played once!).

Taken a while because of the material and some other factors that went into getting them ready for the webseries, but I'm happy to officially be premiering the little fella at the con one year from when I did my first cosplay (appropriately, as the SHD agent you've all seen me build from the beginning). Get ready for V.2, folks!
Wait ti
 
Biscuitbutcher pretty much took the words right out of my mouth. So long as your airsofts have the orange tip on them, you should have no problem walking from wherever you're staying to the convention center. Trust me, you won't be the only dude wearing an arsenal going there. ;)

I usually carry my M4 in a bag, but I'm just putting it and all the gear in the backseat and gearing up in the parking lot Sunday morning before walking in.

- - - Updated - - -



You gotta make them yourself, my friend.

Wait 'til you get a load of mine!

I started designs on it during E3 after getting to play the demo and meet some of the developers. One of them saw my sketches and was like "Dude, how much time have you spent playing the demo? You know way too many details to that thing!" (funny thing was, I'd only played once!).

Taken a while because of the material and some other factors that went into getting them ready for the webseries, but I'm happy to officially be premiering the little fella at the con one year from when I did my first cosplay (appropriately, as the SHD agent you've all seen me build from the beginning). Get ready for V.2, folks!
Wait ti

I cant find a bag of the right colo/size, lol. The biohazard logo i can make myself
 
I cant find a bag of the right colo/size, lol. The biohazard logo i can make myself

If you're crafty at all with sewing, or know someone who is, take a template for a duffle bag and modify it/scale it down. That's essentially what everyone is doing. The dimensions are a bit of a trick, as each person has their own preference. Took a lot of hours of looking at screenshots and trying to identify ways to compare measurements to get mine the size it is. The bigger challenge was the material and color; it had to be a strong yellow, but not obnoxious to look at, while still photographing well. Pain in the ass, but the friend of mine who took over that part of the project so I could work on the Stickybomb Gun did a great job finding the right material.

Just don't rush yourself if you can help it. Worst case, you can always find a very small gym bag and paint the thing. Won't look too pretty, but it'll get the job done.
 
I have a Pelican case (PELI1650) and I am carrying all my stuff about airsoft inside it. So long your airsoft gun have the invoice with you we can carry easily around the city...

This is my watch project. I use led light. I used 4 CR2032 watch battery.
Than I get more powerfull light.
23c4c8d5-3a7c-4eb9-b8f2-648fd9594dd8.jpg
attachment.php

3141bc7a-1496-4001-83f6-1a419f047b6c.jpg
ad5c0d2c-12f4-4fda-99f8-2d41dcd73869.jpg

Now; I will place the original watch face.
I am curious about the material I need to print for the watch face??????????
Any idea???
 

Attachments

  • 7aaf5d21-a38c-4e64-a52f-1048e794812d.jpg
    7aaf5d21-a38c-4e64-a52f-1048e794812d.jpg
    148.5 KB · Views: 289
Last edited:
I have a Pelican case (PELI1650) and I am carrying all my stuff about airsoft inside it. So long your airsoft gun have the invoice with you we can carry easily around the city...

This is my watch project. I use led light. I used 4 CR2032 watch battery.
Than I get more powerfull light.
View attachment 607887
http://www.therpf.com/attachment.php?attachmentid=607888&stc=1&thumb=1&d=1458971420
View attachment 607891
View attachment 607892

Now; I will place the original watch face.
I am curious about the material I need to print for the watch face??????????
Any idea???

Nice, looks good!
For the watch face i plan on using transparency paper.

Where did u get that led strip?
 
Last edited:
LED light strips are available in electronics stores. But I asked to an electric repair service to sell me one meter of it. I paid about 4$ for 1 meter.
I used 4 watch battery (CR2032). It works with 12V.
After I finish the watch face, I will participate the pics.
 
THAT was fun! Way better than last year when I was the only SHD agent to be found. ;P

Best of all, WE FOUND A CLEANER!

Pics to be posted by someone (or each of us) there soon. :)
 
Hey guys ! Some great cosplays here by the way, loving those dark zone loot bags. Just gunna leave one of those watch graphics here, in case anyone wants to use it ! Thanks to Keelan562, who let me use his graphic as a base to build on ! If you want a version with higher res, just pop me a email and I'll send it to ya !

Untitled-1Mk2 low res.png
 
Hi guys;

I was working on the watch face too... But I just print it and try it inside the watch and the result is terrible.

Any idea about the material to print the watch face....???????????

This is the design I made....


kadran.jpg

2 Different model of watch....
ae688f6e-899d-4a89-a11d-ec8e5a463eec.jpg ad5c0d2c-12f4-4fda-99f8-2d41dcd73869.jpg
 
Hi guys;

I was working on the watch face too... But I just print it and try it inside the watch and the result is terrible.

Any idea about the material to print the watch face....???????????

This is the design I made....


View attachment 608659

2 Different model of watch....
View attachment 608661 View attachment 608660

I definitely like the second watch better (the other one looks a liiiittle too much like a cog wheel for my taste).

As for the paper, my advice would be the same as when I messaged you last. I used vellum paper in the last print that I did, and the shine came through much better. A type of paper like that, or tracing paper or transparency paper should suffice. You just want something that will diffuse the light, but not block too much. Play around with different paper types, and you'll find the material that's just right for you.

- - - Updated - - -

Hell yeah that was super fun, hopefully we can do this again at another conevntion, or next wondercon.

Definitely! I'll likely be attending the weekend of Comikaze in October (definitely that Saturday, maybe even Sunday). We can meet up again then, and maybe get some more people to join in. Was nice having the 5 of us there, but would have been better if the several other people we spotted toward the end had joined us.
 
Awesome photos there! Hope we'll be able to organise a meet for the Con in October too!

Made a bit less progress on the guns than I expected, I always forget how masking takes AGES...Anyway, some progress photos. Basecoat done, stencils, weathering and some hand detail work left to do :)
12903658_1054888404568812_909472934_o.jpg12903615_1057125204345132_2076057587_o.jpg

The orange M4 is done too, just didn't have time to remove all the masking tape :D
 
Hey all, Just beginning my build. Have the comm unit 3d printed its been painted and now waiting a pixel ring and driver board to assemble it. I also have a patch and arm band completed. I piked up the ubisoft agent bag the other day at ebgames so I think that will be my bag. Waiting on other parts to come in the mail. Next step the watch hero prop
 

Attachments

  • image3_zpsuekkpvr2.jpg
    image3_zpsuekkpvr2.jpg
    128.8 KB · Views: 133
  • image1_zpsqjni9yqw.jpg
    image1_zpsqjni9yqw.jpg
    165.8 KB · Views: 150
  • image2_zpsg2hqismy.jpg~c100.jpg
    image2_zpsg2hqismy.jpg~c100.jpg
    3.3 KB · Views: 568
Awesome photos there! Hope we'll be able to organise a meet for the Con in October too!

Made a bit less progress on the guns than I expected, I always forget how masking takes AGES...Anyway, some progress photos. Basecoat done, stencils, weathering and some hand detail work left to do :)
View attachment 608889View attachment 608890

The orange M4 is done too, just didn't have time to remove all the masking tape :D

It is looking good, cant wait to see more pictures of your build including the custom CBRN suit.
 
Back
Top