Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate *price finalized*
Thanks, Mystery. If down the line you do, hit me up~
Thanks, Mystery. If down the line you do, hit me up~
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Done / Completed TASM2 Suit Kit *closed*
- Thread starter kiyominai
- Start date
-
- Tags
- spider-man
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate *price finalized*
So my phone camera sucks but here are two more photos. The screen printing ink we used is a reflective black that, when light reflects it, illuminates the brick pattern.
Here are comparison shots:
From actual suit"
Fabric swatches now available for free but only if you are on the interest list.
Will PM everyone momentarily.
So my phone camera sucks but here are two more photos. The screen printing ink we used is a reflective black that, when light reflects it, illuminates the brick pattern.
Here are comparison shots:
From actual suit"
Fabric swatches now available for free but only if you are on the interest list.
Will PM everyone momentarily.
Last edited:
Re: Amazing Spider-Man 2 Brick Pattern - Screen Accurate - swatches now available
So my screen printer said that she'd be able to do an entire suit.
screen printed webbing, screen printed chest and back symbols, brick pattern on red fabric as well.
My question is, if I turn this page into a full suit interest page, who would be interested. Of course, the red fabric may be limited to only certain sizes, only because once we create a screen, we can't edit it unless we make an entirely new screen. Which means you may have to use bigger pieces of the blue brick pattern.
This full suit kit would cost less than $1,000 and will at least be in the affordable range.. We will not use urethane webbing.
Note: As we currently do not have an in-house seam stress, we will not be able to put it together for you
So my screen printer said that she'd be able to do an entire suit.
screen printed webbing, screen printed chest and back symbols, brick pattern on red fabric as well.
My question is, if I turn this page into a full suit interest page, who would be interested. Of course, the red fabric may be limited to only certain sizes, only because once we create a screen, we can't edit it unless we make an entirely new screen. Which means you may have to use bigger pieces of the blue brick pattern.
This full suit kit would cost less than $1,000 and will at least be in the affordable range.. We will not use urethane webbing.
Note: As we currently do not have an in-house seam stress, we will not be able to put it together for you
kpspideynuts
Member
Re: TASM2 - Screen Printed Webbing, Spider Symbols, and Brick Pattern
be one hell of a suit love to see it ready to put together still interested
be one hell of a suit love to see it ready to put together still interested
fun4spidey
Sr Member
Re: TASM2 - Screen Printed Webbing, Spider Symbols, and Brick Pattern
Sounds dope
Sounds dope
Re: TASM2 - Screen Printed Webbing, Spider Symbols, and Brick Pattern
We'll do our best! !Sounds dope
Dozer3677
Well-Known Member
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate
You really shouldn't be bashing peoples pricing. If you don't like it, just move along. Kiyominai looks to have a great suit, and interest. What he/she feels like charging is up to them. Price bashing is not allowed in the forum. GLWS Kiyominai.
You really shouldn't be bashing peoples pricing. If you don't like it, just move along. Kiyominai looks to have a great suit, and interest. What he/she feels like charging is up to them. Price bashing is not allowed in the forum. GLWS Kiyominai.
AlphaEarth
Member
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate
Dozer3677 - Read through the thread, Kiyominai asked what ppl thought about the price (see bolded text below). Get all the facts before you go dragging ppls names and comments through the mud! If you dont want to read the entire thread...move along.
Dozer3677 - Read through the thread, Kiyominai asked what ppl thought about the price (see bolded text below). Get all the facts before you go dragging ppls names and comments through the mud! If you dont want to read the entire thread...move along.
Re: TASM2 - Screen Printed Webbing, Spider Symbols, and Brick Pattern
i cannot wait to see the finished results of a suit and if it is bad ass i will do my best to sell my other suits to upgrade to youirs...
- - - Updated - - -
not price bashing ... if i can almost buy a suit for the price of the material when i wrote that ... which would you buy?
i cannot wait to see the finished results of a suit and if it is bad ass i will do my best to sell my other suits to upgrade to youirs...
- - - Updated - - -
not price bashing ... if i can almost buy a suit for the price of the material when i wrote that ... which would you buy?
Dozer3677
Well-Known Member
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate
No need to take it personally. And I did read the entire post. How do you think I multiquoted? Sounds like the "best I can do" quote is after ichidave complained/price bashed. In fact, it is. Doesn't sound like. So yes, again, price bashing is not allowed. I stand by my original quote. Never dragged anyone's name through any mud. Just took some time to make sure some newer members know that price bashing is not allowed. If you do not like a price, again, move along. Never bashed anyones rep, or reported anyone. Just stated for those who may not know, if you don't like a price, move along, start your own thread, make your own product, go somewhere else. Thats all. Kiyominai has a good product. So yeah, read the whole post, not just your own comments. Bold not needed if you do not read it correctly. If you read it, you would see the price bashing began before Kiyominai asked what others thought. And even him asking what do others think can be left to interpretation as he could be asking what do you all think of the price, or do you all think you will need 4 sheets to complete.
Yeah, your name is not in the mud. Just trying to help protect the hard working artists on this site. Snippy comments not needed. And if you are a premium member, you should know above all else that price bashing is not allowed, so not sure why you would allow it, let alone participate.
- - - Updated - - -
That is price bashing. If the cost of the suit is that cheap, move along and buy the suit. No need to bash someones price for their work and then say I could get this for that. Go ahead and get it then. That is the definition of price bashing.
No need to take it personally. And I did read the entire post. How do you think I multiquoted? Sounds like the "best I can do" quote is after ichidave complained/price bashed. In fact, it is. Doesn't sound like. So yes, again, price bashing is not allowed. I stand by my original quote. Never dragged anyone's name through any mud. Just took some time to make sure some newer members know that price bashing is not allowed. If you do not like a price, again, move along. Never bashed anyones rep, or reported anyone. Just stated for those who may not know, if you don't like a price, move along, start your own thread, make your own product, go somewhere else. Thats all. Kiyominai has a good product. So yeah, read the whole post, not just your own comments. Bold not needed if you do not read it correctly. If you read it, you would see the price bashing began before Kiyominai asked what others thought. And even him asking what do others think can be left to interpretation as he could be asking what do you all think of the price, or do you all think you will need 4 sheets to complete.
Yeah, your name is not in the mud. Just trying to help protect the hard working artists on this site. Snippy comments not needed. And if you are a premium member, you should know above all else that price bashing is not allowed, so not sure why you would allow it, let alone participate.
- - - Updated - - -
That is price bashing. If the cost of the suit is that cheap, move along and buy the suit. No need to bash someones price for their work and then say I could get this for that. Go ahead and get it then. That is the definition of price bashing.
webslingerf
New Member
Re: TASM2 - Screen Printed Webbing, Spider Symbols, and Brick Pattern
Moving forward now.....it appears that this is going to be a good thing for all of us costumers wanting to make a accurate ASM 2! Thanks Kiyominai for your attention to details,cant wait to get my sample.
Thanks,Webslingerf
Moving forward now.....it appears that this is going to be a good thing for all of us costumers wanting to make a accurate ASM 2! Thanks Kiyominai for your attention to details,cant wait to get my sample.
Thanks,Webslingerf
AlphaEarth
Member
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate
If you think those comments are "price bashing", then you must be very sensitive to that. I dont see it as price bashing at all, especially when Kiyominai openly asked. And I dont think that his response could be "left to interpretation". He clearly asked in reference to his previous statement about getting the cost down. He is obviously open to suggestions, or else he wouldnt have said "Best I could do is sell it for $100 or $115". To me, that means he is willing to flex on the price a bit. He obviously wants to sell this, but he shouldnt take a hit because people dont want to pay for his quality work. All I was doing was offering up my opinion to help him potentially sell more. If Kiyominai had a problem, I'm sure he would have said something. Heck, he even thanked people for their input on the price. Not sure why you feel the need to call people out and promote yourself to the role of "comment police".
I get your point about "price bashing". I really do. But your examples, from this particular thread are weak examples. They are not bashing or negative in any way. Sure, if people dont want to pay for good quality and would rather skip on the quality and have something cheaper...then thats on them. And they shouldnt degrade peoples work. But I dont see that happening in this particular thread. Simply people offering up opinions based on Kiyominai's open question. And again, if Kiyominai had a problem with it, then I'm sure he would, and could, handle it himself.
If you think those comments are "price bashing", then you must be very sensitive to that. I dont see it as price bashing at all, especially when Kiyominai openly asked. And I dont think that his response could be "left to interpretation". He clearly asked in reference to his previous statement about getting the cost down. He is obviously open to suggestions, or else he wouldnt have said "Best I could do is sell it for $100 or $115". To me, that means he is willing to flex on the price a bit. He obviously wants to sell this, but he shouldnt take a hit because people dont want to pay for his quality work. All I was doing was offering up my opinion to help him potentially sell more. If Kiyominai had a problem, I'm sure he would have said something. Heck, he even thanked people for their input on the price. Not sure why you feel the need to call people out and promote yourself to the role of "comment police".
I get your point about "price bashing". I really do. But your examples, from this particular thread are weak examples. They are not bashing or negative in any way. Sure, if people dont want to pay for good quality and would rather skip on the quality and have something cheaper...then thats on them. And they shouldnt degrade peoples work. But I dont see that happening in this particular thread. Simply people offering up opinions based on Kiyominai's open question. And again, if Kiyominai had a problem with it, then I'm sure he would, and could, handle it himself.
Re: Amazing Spider-Man 2 Brick Pattern - Almost Screen Accurate
thanks man, look forward to it. Hopefully we'll get it in done in November if not at least before Christmas. We're currently working on the pelting layout. We have to make sure the webs line up when you sew it together.
Thanks
Thanks man, though i hope you'll be able to keep your old suits and still purchase my kit.
thanks! I hope you receive your sample soon. It's printed on fabric lining just because it's cheaper to print on it for swatches. The quality still keeps
Yeah definitely. We'll give you the option to have webs on it or not.
thanks man, look forward to it. Hopefully we'll get it in done in November if not at least before Christmas. We're currently working on the pelting layout. We have to make sure the webs line up when you sew it together.
Sounds dope
ThanksThanks man, though i hope you'll be able to keep your old suits and still purchase my kit.
thanks! I hope you receive your sample soon. It's printed on fabric lining just because it's cheaper to print on it for swatches. The quality still keeps
Yeah definitely. We'll give you the option to have webs on it or not.
Similar threads
