Star Destroyer Avenger part ID help please

[MonsieurTox]

Not sure if this has been ided yet, but i believe it is from the Monogram B29.

Not the ISD part

 

[MonsieurTox]

Hey guys,

Do you have any idea about this hatch ? It's about 3 cm long.

 

[MonsieurTox]

I'm dumb... I had the right kit but forgot to look inside !

It's from the 1/25 Tamiya Su-100.

 

[MonsieurTox]

Hey guys, I really need your help.

I would need high quality pics of this area :

Actually I have no good (front) pics of this area and I have hard times to figure what parts were used.

Also (still in the same area), does any of you guys know what are those parts ?

Any help would be greatly appreciated, thank you in advance !

 

[MonsieurTox]

Found the one in the middle, I still need the with the 3 pins and the part with the ship part glued on the top. Thanks !

 

[Scratchy]

I wonder if the three pieces with the first arrow could be parts that are shaved off of part A18 of the 1/20 Tyrell Six Wheeler. They had to shave those parts off for the part to be used elsewhere on the Star Destroyer, maybe the boys at ILM utilized the "leftovers" here by gluing them to a styrene chip..... just a thought.

 

[dirtydave]

I wonder if the three pieces with the first arrow could be parts that are shaved off of part A18 of the 1/20 Tyrell Six Wheeler. They had to shave those parts off for the part to be used elsewhere on the Star Destroyer, maybe the boys at ILM utilized the "leftovers" here by gluing them to a styrene chip..... just a thought.

That's funny Jay,I was just looking at the 1/12 Tyrell the other day & thought part G18 looked close but to tall.

 

[Scratchy]

I'ld like to see what the part in the middle is that Julien ID'd, I wonder if it has a "tab" on it for these three pins to be glued upon.

Dirtydave, I also looked through the 1/12 Tyrrell and the 312T, and these where the ideal match, Still wondering if it's a perfect fit for the space on Tox's ISD.

 

[MonsieurTox]

Thanks guys, I ve also looked at this part but those are not a perfect match Another part would be from the 88 mm which is a plate (right size) with 3 pins, but those pins dont have 2 levels, just one, so its probably not the right part either.

The middle part is actually a section of the Midway carrier deck, the part is only visible on this pic so it was hard to find under this angle... I'll take a pic of the part ! That's actually the notched (for the elavator) section of the deck ! (if that makes sense)

 

[Lamboman]

Hi Julien,

I have just bought some Revell "Battle of Midway" kits and they have some parts with the two levels which look just about right if they were glued to a flat plate ?

I have also PM to your personal e mail with another question please
Andrew

Thanks guys, I ve also looked at this part but those are not a perfect match Another part would be from the 88 mm which is a plate (right size) with 3 pins, but those pins dont have 2 levels, just one, so its probably not the right part either.

The middle part is actually a section of the Midway carrier deck, the part is only visible on this pic so it was hard to find under this angle... I'll take a pic of the part ! That's actually the notched (for the elavator) section of the deck ! (if that makes sense)

 

[MonsieurTox]

Hey guys !

I would need your help with these parts !

Thank you very much

 

[kbilly]

No 2 looks like the part from the SU122 that's on the falcon, cut down.

 

[MonsieurTox]

Thanks KB you're right ! It's cut

Found part #1, it's from the Japanese Tank.

 

[BlackPig]

No.7 is from this ,Julien !

 

[MonsieurTox]

Good call BP ! Thank you my friend !!

I found the part #4 it's from the Churchill.

 

[MonsieurTox]

OK part #3 is also from the Churchill, the grill part used on the 32" radar dish. I'm out of this part lol

 

[MonsieurTox]

Hey guys,

I need your help for those 2 parts !

Any idea ?

Thank you in advance !

Julien

 

[MonsieurTox]

I need again your help !

Does anyone know where I could find those folded heatsinks ? They look very similar to the one used on the T-16... Any help would be much appreciated ! Thank you

 

[BlackPig]

Hey guys,

I need your help for those 2 parts !

Any idea ?

Thank you in advance !

Julien

Yes ! I have an idea, Julien !!
But I can help for only one part now.

I believe this part is right. What do you think ?

**** Please somebody show me the fine pics of ISD(Avenger) !! ****

 

[MonsieurTox]

BP

You rock !! :love

That's the right part =)

I too would love to see some new pics of the Avenger, several areas havent been covered yet I hope she will be in display soon... somewhere !