Star Destroyer Avenger part ID help please

I need your help again :D With part ID or a straight front view of this area !

I'm sorry I only have those pics, and I'm mainly looking for the green part (I may have an idea for the blue ones, but not sure yet) :

8ft345.jpg


Thank you !
 
Hi Julien,

Yes. They do look very similar. If you check the T-16 thread ("Cantwell T16 Skyhopper research thread"; Post #94), I've i'd them there.

If they are the same ones, Fischer Elektronik makes (made) them, you may have a better chance of finding a supplier in Europe than here in Oz. If you do find a supply, I'll buy a few from you.

Cheers, John

MonsieurTox said:
I need again your help !

heatsink.jpg


Does anyone know where I could find those folded heatsinks ? They look very similar to the one used on the T-16... Any help would be much appreciated ! Thank you :)
Click to expand...
 
Awesome John !!

Actually the one used on the T-16 is too big but there is one that looks OK in diameter :

http://uk.farnell.com/productimages/farnell/standard/42348254.jpg

And it has not the extra fins the one used on the T-16 has so it should be the right one ! (KK 504)

Thank you for your help, I gonna put an order to get the ones I need, I can also add a few KK 5095 S to my order if it's easier for you ! Just LMK. :)

[edit] Well... bad news, the one I need (and it's the correct one :() is no longer produced... No chance to find 20 or so of them...
 
Last edited:
Julien,

We have a number of electronic componenet suppliers here in the UK and i have found a couple of companys that do supply these but need to know the dims so i can see if they are the correct size as the part numbers are different over here ?

Andy
 
Rats said:
That's bad news Julien. Maybe you could stick two of these together; KK505 - Heatsink starlike for TO5; available from here DARISUS Online Shop

Or, for 504's try here; MAR electronics - Products - Clip-on. They also have 5095's

Cheers,

John

Also, check your PM
Click to expand...

Awesome, thank you for your help John, it's really useful !





Lamboman said:
Julien,

We have a number of electronic componenet suppliers here in the UK and i have found a couple of companys that do supply these but need to know the dims so i can see if they are the correct size as the part numbers are different over here ?

Andy
Click to expand...


Hey Andy,

The sie is about 14 mm, TBH I havent taken any precise measurements, just eyeballed the diameter in comparison with my brim trenches ! But I think the part numbers is the same in the UK as this part was only made by one manufacturer, so it's KK 504 ! :)
 
Hi Julien,
Ive found a supplier here in the Uk and i have ordered a couple to see if they are the correct one. The supplier has told me they are 13. 1 mm :thumbsup
As soon as i get them will send you some pics
Andy
 
Hi Julien,
The two parts have arrived today not sure how to load a picture on the site ?

They are slightly larger than I was told they are between 16 and 17 mm but they have the correct number of "fingers" and they look to be correct to the SD pics. :thumbsup
They are less that £1.00 each over here.
Andy
 
Hey Andy !

Very cool :)

From what I've found, there was only one kind of this very heatsink, so that should be the one used on the original !! I hope so :)

If you have any chance to take a pic next one of the parts used on the trench, that would be cool ! I've bought some from a guy, I dont know when I'll receive them (nor if I ever get them actually lol) we'll see ! :)
 
Hi Julien,

Sorry for quality of picture here are the heatsinks with a trench part.
I am going to order a few so if you need any let me know
Andy
 
Hey julien,

I think the size is correct.

They work out at £0.90p each over here plus postage (just under £1.00 each)

Do you think there is 30 ? i can only count about 12 at most ?

Andy
 
The price is correct !!

I dont hqve the correct amount yet, but I think it's something like 25 or so Ive counted more than 12 in the hero side trench, but I prefer to get some extra...
 
Julien,
Let me know how many you want and i will order them with mine
They only take about 3 days or so to get over here
 
Andrew, let me some time to count how many heatsinks they used, some are hidden behind parts, they're not all easy to spot !

Thank you for your help ! :)
 
Hi Blackpig,
I knew about the small legs on the top from the nelson but the larger part at the bottom was the one i didnt know what it was from :cry
Can you help?
Andy
 
Awesome BP !! Gonna change that one mine ! :)

Was looking for those parts for so long and finally I gave up, scratching those parts haha !

Thank you so much for sharing !

Andy, what part you're looking for ? The Taiho deck or the sprue that holds the Nelson/Rodney barrels ?
 
Welcome :)

Hum 14 ? That's about what I counted for the hero side... Gonna check my pics but that's hard cuz some area are not well covered...
 
You must log in or register to reply here.

Similar threads

eethan
  • Sale
Star Wars Kobold aluminium conversion cap for Luke's severed hand saber kits
Replies
1
Views
138
eethan
eethan
elmagoxotaku
Cosplay Dr Emmett Brown - Back to the future
Replies
2
Views
162
elmagoxotaku
elmagoxotaku
agliarept
DIY Mickey Battle Helmet Kits - Interest Thread
Replies
1
Views
180
agliarept
agliarept
turner3d
TOS Communicator Build
4 5 6
Replies
110
Views
9,914
warpsled
warpsled
Moska
Aliens Drop-Ship _ Halcyon 1/72
Replies
9
Views
334
Antsnest
Antsnest
Back
Top