Limited Run SaberBay DARKSABER season 3 finish now available (limited quantities) saberbay.com

[ManchegoVariant]

I remember when the run first started that Shtok was also going to make his own chassis too? Is that something still going on? Or was I mistaken?

 

[cgiaco]

Saberbay is there a parts breakdown anywhere with pictures of everything that comes in the box?

 

[Saberbay]

Saberbay is there a parts breakdown anywhere with pictures of everything that comes in the box?

First post has a video with each part shown and explanation while unboxing
Has some special instructions
I recommend watching it before construction

 

[cgiaco]

First post has a video with each part shown and explanation while unboxing
Has some special instructions
I recommend watching it before construction

Thanks! Not sure how I missed that!

 

[itswulfy]

So I started playing with my kit and I have a couple of questions. Is there a diagram on what greebles go where because I was able to figure out the majority of looking at the various videos, but there’s a couple of set screws and a couple of greebles that I have no clue where they go. Then one of the Grimleys, for the hilt guard broke. How would I go about getting a replacement?

 

[bluemilkncookie]

If anyone is still looking for a handle and blade I may need to part ways with mine.

I’m interested! I’ve been looking for one.

 

[SpectreII]

Happy darksaber day to those who celebrate UPS delays.

 

[PattyChuck]

Talk about great timing. UPS guy was driving up to the house as I was loading the car for C2E2 this weekend. I didn't have all the necessary components (or the time) to get it all lit up, but I trooped with it at C2E2 anyway. Everyone that handled it was like, "Woah! This thing is solid!"

 

[MMcFett]

I have the same question.

Does anyone have a diagram or video of how to do the soldering for the blade to the pcb? i'm not as familiar with that portion of the build

 

[imawilliamray]

Does anyone have a diagram or video of how to do the soldering for the blade to the pcb? i'm not as famiI liar with that portion of the build

I haven't installed yet but it looks like you just run run a wire from the labeled pads to +, -, and data in (Din) on the pixel strip. Should be fairly straightforward I think. Could run a wire to each power pad, but I imagine that isn't necessary with the short, single LED strip. Somebody please correct me if that is bad advice though.

 

[SethS]

Glad I'm not the only one. Seems like anything that came down to SoCal had some wack delivery. First it was Thursday, then Friday. Now it's Monday. Make up your minds and fight me already! (I do not condone the assailing of your local UPS person.)

Mine jumped a day as well, but it arrived!
And after looking at these parts, an of you LA guys want to do my install for me? lol

 

[ObiWanJacobi]

Happy darksaber day to those who celebrate UPS delays.

YESSIR!!! Finally out for delivery!!

 

[ObiWanJacobi]

ITS HERE!! It’s so beautiful
So excited to get started on this! Thank you Justin!!

 

[csworkshop]

Mine has arrived!! Two questions though. How tf are you meant to screw in the two diagonal screws facing each other on the emitter? And second… what are the copper pieces for?…

 

[ARogo]

Mine has arrived!! Two questions though. How tf are you meant to screw in the two diagonal screws facing each other on the emitter? And second… what are the copper pieces for?…

 

[DrEximus]

Got mine too, is the hilt naturally just wobbly when swinging or did I not attach something properly?

 

[Bruinrogue]

Last stop for the truck naturally.

 

[Saberbay]

Got mine too, is the hilt naturally just wobbly when swinging or did I not attach something properly?

shouldnt be wobbly, chassis needs to be inside and screw needs to be fastened all the way

 

[Saberbay]

Mine has arrived!! Two questions though. How tf are you meant to screw in the two diagonal screws facing each other on the emitter? And second… what are the copper pieces for?…

your suppose to screw them into the sleeves

 

[imawilliamray]

View attachment 1687043

Oh dang, I figured out the one for the plug, but assumed the second rod was an extra. It hadn't occurred to me to insert it into the hole in the hilt. That was a tough one to get in. Thanks!