Prop Replica STL files Section Free Personal Use

[B Wo]

I am also getting the 404 when I click the "Download All Files" box at the top. I did not try that route when I uploaded the files. When I download from Thingiverse, I've gotten into the habit of going to the "Thing Files" tab, below the images, 2nd to the right after "Thing Details." After uploading, I checked that I could download the .zip, the Top.stl, and the Bottom.stl (in case separate files were easier for some to work with). I apologize for the oversight.

The "Download All Files" issue may be resolved at some point in the future. In the meantime, Jintosh and mrwax, or anyone who's previously had a 404 error, will you please try the "Thing Files" workaround and see if that works?

 

[Jintosh]

Yep, that worked.

Maybe the reason is that "all files" is TOO LARGE.
The same reason you can't host here on the RPF.

 

[Jintosh]

****************************************
7th Doctor's Tardis Key

I saw this elsewhere and made a quick replica.

*****************************************
For Personal Use ONLY.

 

[nivektunk]

This is a great thread. Thank you to all the contributors.
Cheers,
Kevin

 

[Jintosh]

This is a great thread. Thank you to all the contributors.
Cheers,
Kevin

Yes, people have added some nice gems into the thread over time. A lot of times, I'll see someone else's build elsewhere and make a model to add here. Mine (such as the 7th key) isn't going to be spot on on the dimensions like the guy that cast from the original prop, but still, not bad for free.

 

[Wayne Bakken]

----edited-----

B Wo showed that downloading the individual files instead of "all files" works.

And yes, this is why external links are less desirable. The control of the file is beyond TheRPF's control. For large files, there's just little choice.

There has been a glitch on thingiverse lately that when you click the download all it gives that error. they fixed it in the last few days.

 

[Jintosh]

"CREED" Saints medal from Constantine.

One of the charms worn by Constantine.

Print this at 15/16 inch width. 23.8mm.
This is VERY small. Extreme resolution is necessary to print.
******************************************************

Free for Personal use.

 

[Jintosh]

REVISED : 1/11/2021​

The TearDrop charm from Constantine.

One of the medals he wears.

*********************************************

For Personal use only.

 

[Veldmaat]

Does anyone have this EZ Sleep .stl by any chance or know where I can purchase it? It seems it use to be on cults3d and it disappeared. :/

View attachment 1296443

It’s available again!

EZ SLEEP Back to the future 1:1

A model much awaited by fans of the Back to the Future license! On a scale of 1:1! The model is in several parts for easy printing and sanding. I am currently working on a different electronic version. If you like my work, I'll let you follow me, bye. A model eagerly awaited by fans of the Back...

cults3d.com

 

[EmmaInCandyland]

Does anyone has a good Beskar ingot file with the right pattern? I can't seem to find one! Even one stl for purchase haha!

 

[Jintosh]

Does anyone has a good Beskar ingot file with the right pattern? I can't seem to find one! Even one stl for purchase haha!

******************************************

The Mandalorian.
Beskar Ingot

-----edit-----
I finally came back and finished this.
UPDATED 10/6/2021

******************************************

Free for personal use.

 

[EmmaInCandyland]

View attachment 1413304

******************************************

Beskar Ingot

******************************************

Free for personal use.

Thanks but it doesn’t have the pattern! Looking for one that has the correct pattern etched

 

[Wayne Bakken]

The sleigh bell from the 2015 movie Krampus:

View attachment 1375677View attachment 1375678View attachment 1375680

I couldn't get the compressed file size below 50MB, so the files are hosted at Thingiverse: Krampus Bell

I printed one off to mess around with. I started with a gloss black, then I used graphite powder to give it a metallic sheen. I sealed that with a flat clear and weathered with some liquitex basics red oxide.

 

[Jintosh]

Wow. Well done. Looks metallic.

 

[DMO]

Here is a name plaque for the Rocketeer helmet. I finished this with Rub and Buff antique gold but I may redo it with something a little more "brassy". It has an Art Deco motif with the Aeronaut font. I scaled this up by 25% to make it about 7 3/4" long.

 

[Vindex]

Here is a name plaque for the Rocketeer helmet. I finished this with Rub and Buff antique gold but I may redo it with something a little more "brassy". It has an Art Deco motif with the Aeronaut font. I scaled this up by 25% to make it about 7 3/4" long.

View attachment 1431699

Nice work.

 

[Jintosh]

Revised 4/30/2021
***********************
The Continental Coin Box CREST from John Wick 2 movie.

*********************************
Free for PERSONAL use.

 

[Jintosh]

The Mummy (1932) Boris Karloff.

The Seal of the Seven Jackals Stone Warning.

************************************

For Personal use only.

 

[Jintosh]

****************************************************************
Wheel of Pain from Conan the Barbarian (Schwarzenegger)
Can be used as a necklace, like in the movie.
*****************************************************************
For personal use only.

 

[Jintosh]

****************************************
The bunny statue from ROMANCING THE STONE.
It is hollow and properly sized so that RelicMaker's stone should fit through the hole in the bottom.

*****************************************
For personal use only.