Post pics of your own 3D creations (not purchased)

[TazMan2000]

I redid the building part to make it a bit more accurate in shape to the show not some documentation I found which is fortuitous since the large panel on the side of the building is only 3 pieces large instead of six. I don't have a 1/72 Eagle to test the door height on, but the boarding ramp and interface will be easy to change if it's a bit off.

It's up on Cults now.

TazMan2000

 

[joberg]

Great stuff Taz, great stuff In my "Big Black Book Of Projects", this is one set I want to reproduce as well as the UFO Interceptor pit

 

[TazMan2000]

Great stuff Taz, great stuff In my "Big Black Book Of Projects", this is one set I want to reproduce as well as the UFO Interceptor pit

I understand that. I've have so much stuff that I have to start purging, unless I live to be 150.

TazMan2000

 

[joberg]

I understand that. I've have so much stuff that I have to start purging, unless I live to be 150.

TazMan2000

150?..Nah; you'll add some more stuff over the years. "The List" is never done

 

[TerranCmdr]

There's some amazing stuff in this thread! Here are some of my creations:

Hammerhead Corvette from Rogue One (my interpretation of one anyway, proportions adjusted to better fit as a game model for X-Wing)
Also this was before I had a resin printer so believe it or not, everything on this is FDM printed.


Consular Cruiser from Episode I (this one is unpainted as it was a gift to a friend, working on finalizing and painting my own):


TIE "Breacher" from Force Unleashed comics:


TIE Shuttle from Empire Strikes Back:


"Dr. Ball" medical droid at SW:Legion scale:


That's all for now but I'll post some more later!

 

[TazMan2000]

There's some amazing stuff in this thread! Here are some of my creations:

Hammerhead Corvette from Rogue One (my interpretation of one anyway, proportions adjusted to better fit as a game model for X-Wing)
Also this was before I had a resin printer so believe it or not, everything on this is FDM printed.
View attachment 1641032View attachment 1641028View attachment 1641029View attachment 1641030

Consular Cruiser from Episode I (this one is unpainted as it was a gift to a friend, working on finalizing and painting my own):
View attachment 1641033View attachment 1641034View attachment 1641035View attachment 1641036View attachment 1641037View attachment 1641038

TIE "Breacher" from Force Unleashed comics:
View attachment 1641041

TIE Shuttle from Empire Strikes Back:
View attachment 1641043

"Dr. Ball" medical droid at SW:Legion scale:
View attachment 1641044

That's all for now but I'll post some more later!

Nice stuff. Can be gaming size or nice display pieces.

TazMan2000

 

[Attirex]

Consular Cruiser from Episode I (this one is unpainted as it was a gift to a friend, working on finalizing and painting my own):
View attachment 1641033View attachment 1641034View attachment 1641035View attachment 1641036View attachment 1641037View attachment 1641038

TC:

Is that Radiant an X-Wing game piece or your own 3D print? I've always liked that ship!

 

[TerranCmdr]

TC:

Is that Radiant an X-Wing game piece or your own 3D print? I've always liked that ship!

It's my own design and 3d print scaled to fit X-Wing! Here's a video of the construction if you're interested:

I also have the C70 retrofit version modeled, just waiting on my printer to work properly again:

 

[Attirex]

It's my own design and 3d print scaled to fit X-Wing! Here's a video of the construction if you're interested:

I also have the C70 retrofit version modeled, just waiting on my printer to work properly again:
View attachment 1641183

Awesome work! Thanks for sharing. If you ever sell as a kit, I'd prob buy one.

 

[TerranCmdr]

Thank you! I do plan to sell either kits or STLs, haven't decided which makes more sense for me. But I will definitely let you know.

 

[Attirex]

Thank you! I do plan to sell either kits or STLs, haven't decided which makes more sense for me. But I will definitely let you know.

Excellent, thanks. I don't have a printer and at this point, I've run out of room and def do NOT need another ship but....maybe could find room for the Reliant if you made a kit available.

 

[Bloop]

Here's a couple original sculpts I've done. I've posted them in the Sculpture and Makeup Effects sub-forum, but figured I'd show them here too.

Deckard from Blade Runner bust, 3D model & print:

Chief Brody from Jaws sculpt (wip, print coming):

 

[TazMan2000]

Here's a couple original sculpts I've done. I've posted them in the Sculpture and Makeup Effects sub-forum, but figured I'd show them here too.

Deckard from Blade Runner bust, 3D model & print:
View attachment 1644873View attachment 1644874View attachment 1644876View attachment 1644877

Chief Brody from Jaws sculpt (wip, print coming):
View attachment 1644878View attachment 1644879

Outstanding.

TazMan2000

 

[joberg]

Love your work Bloop

 

[TazMan2000]

My version of the Space 1999 Main Mission Desk Lamp

I also made a version with a base. I'm sure the original lamp had some sort of weight or transformer in the base to support the angle of the lamp and the lamp shade. Mine being 3d printed, it wouldn't make sense weighing it down. I think it's kind of cool looking for a retro lamp, especially in bright or metallic colours.

TazMan2000

 

[TazMan2000]

Since it's so bloody cold up here, I've had more time to design a couple more things with my fascination with artillery rounds.

TazMan2000

 

[TazMan2000]

Combat Knives from Avatar: The Way of Water.
Even though the knives are pictured with the same handle, the Recom knife (teal) was meant for the genetically engineered Na'Vi and is such, significantly larger. I guessed the total length of this knife would be about 19 inches, so I made mine at 475mm, which makes the blade and tang just fit on my 12" print bed if I place it diagonally.

TazMan2000

 

[TazMan2000]

I don't know why I didn't do this earlier, but I made a small diorama which should fit on a larger style resin printer. The diameter is less than 120mm and is solid, but I suppose you could use your slicer program to hollow it out and perhaps drill some holes for fiber optics or lights to make it pop.

I'm not making an Eagle at this scale.

TazMan2000

 

[joberg]

Love the idea...but you'll need a "Micron Machine" to print the Eagle

 

[TazMan2000]

Love the idea...but you'll need a "Micron Machine" to print the Eagle

Yeah, it definitely would be rough.