Nike MAG replicas (V2 and V3 only)

[jjdelp]

Keep up the good work davidjones888

 

[jjdelp]

V3 upgraded with my LEDs. I can do it for anyone. davidjones888

 

[WizardBTTF]

davidjones888 can you start selling these??

 

[Nzfly]

If you would sell the soles, I would be interested in some. It would help me to have a go at making my own without some of the headache. davidjones888

 

[Spyhunter2k]

V3 upgraded with my LEDs. I can do it for anyone. @davidjones888

@davidjones888 Please see the pics posted with this reply above. The shoes should look like the one on the right with brighter EL and less bright LEDs.

 

[davidjones888]

@davidjones888 you are awesome

Thank you .

 

[davidjones888]

Keep up the good work @davidjones888

ok .we will , thx

 

[davidjones888]

V3 upgraded with my LEDs. I can do it for anyone. @davidjones888

sorry for the problems .

would u pls send your order number and these pics to this email : zhilongtrade@hotmail.com

we will check it for u, thx

 

[davidjones888]

@davidjones888 can you start selling these??

View attachment 661757

Do not sell it now . we will think of it now

 

[jjdelp]

I removed the LEDs on the right shoe and added my own led light board that I created. I do that for whoever wants it done. Someone sent me those to change. davidjones888

 

[ajhix]

jjdelp

V3 upgraded with my LEDs. I can do it for anyone. @davidjones888

Where are you located? I might be interested in this, that looks pretty awesome.....

 

[jjdelp]

Thanks Aj. Indiana

 

[davidjones888]

If you would sell the soles, I would be interested in some. It would help me to have a go at making my own without some of the headache. @davidjones888

we will think of it . thx

 

[MrSouthpaw]

we will think of it . thx

Please sell the whole lower part. The painted sole, the EL panel, the clear sole as a single unit or parts kit.

 

[rhodrijen]

For those interested, I just had an email from cloneprops via shapeways (I'm sure some others on here have too). He is selling the small size ankle buckles again, for those who want them for V2s....or even V3s!?

 

[EmmaInCandyland]

For those interested, I just had an email from cloneprops via shapeways (I'm sure some others on here have too). He is selling the small size ankle buckles again, for those who want them for V2s....or even V3s!?

I got some when he made his first run to go with my markpoons. Really cool pieces but they are a bit heavy X)

 

[cavx]

For those interested, I just had an email from cloneprops via shapeways (I'm sure some others on here have too). He is selling the small size ankle buckles again, for those who want them for V2s....or even V3s!?

Interesting that he is now selling the small.

 

[MrSouthpaw]

Interesting that he is now selling the small.

It clips onto the stock buckle, right?

I'll have to do some measuring. If it is much taller than the HC buckle it might not work well due to the shorter collar.

 

[cavx]

It clips onto the stock buckle, right?

I'll have to do some measuring. If it is much taller than the HC buckle it might not work well due to the shorter collar.

The small should be the same size (height) as the buckles on the V2 and now V3. The Mediums cliped over the V2 buckles which is why they looked over sized. They did look good on the US12 and US13s.

 

[DragonGalvy]

When they supply QC shots, they need to use this...

http://www.therpf.com/attachment.php?attachmentid=661657&d=1473203528

...then turn the shoes on so you can BOTH shoes work.

That 'pose' of the shoes would be good for including in the QC pics. Hope those aren't yours - one swoosh is WAY higher up on the right shoe. That probably means the one on the left will have an intent mark in the grey above the swoosh which is visible in certain kinds of light. My left one is a little low but only one or two mm so I didn't mind.