New MG-34 in town! (Denix)

[Ryan Clinton]

Got it. Had to hammer it of. Did you ever tried to remove or separate the Barrel as there's a screw underneath?

Yes there's just the 1 screw. Remove it and you can take off the barrel. It makes it really easy to transport the thing. Just remove and put the screw back with ease so you don't strip it out.

 

[kurtyboy]

Yes there's just the 1 screw. Remove it and you can take off the barrel. It makes it really easy to transport the thing. Just remove and put the screw back with ease so you don't strip it out.

Any chance of offering the metal box?

 

[Jamesfett]

Any chance of offering the metal box?

Yes, please do.

 

[Ryan Clinton]

Any chance of offering the metal box?

I just ordered some aluminum U- channel. I'll make a few of them.

 

[Jamesfett]

I just ordered some aluminum U- channel. I'll make a few of them.

You sir are awesome.

 

[russellsch]

Ryan Clinton if you do a run of the metal boxes, I’m definitely interested

 

[Ryan Clinton]

Ryan Clinton if you do a run of the metal boxes, I’m definitely interested

Probably going to do 6 or 7 of them.

 

[Jamesfett]

Well Kurtyboy asked first so I will be a gentleman and take the second one.

 

[Johnnyb]

Would love to get a metal box Ryan.

 

[Revolver Ocelot]

Could also use a metal box, if made available.

 

[Cameron]

Mail call.

 

[Ryan Clinton]

I have the aluminum U channel I'll make some boxes this weekend.

 

[wannab]

I have the aluminum U channel I'll make some boxes this weekend.

I'm in for one if available.

 

[DarthWilder]

I have the aluminum U channel I'll make some boxes this weekend.

Ha, if any boxes left, I would also take one. Just received my MG34, too, after a long backorder delay.

 

[Jamesfett]

Mine will be here any day so gonna need my box

 

[Ryan Clinton]

I may have to get more aluminum i only have enough for 6 right now. I'll set up the run and post. I'll take a picture of my modifications i had to do. Nothing crazy. The pressure from the receiver cover is enough to hold it in place. This aluminum is a little thicker than what I used on mine. Also if anyone wants specific engraving on their stock think about serial numbers or whatever you'd like and I'll post a run for that also. The stock has to be as you recieved it. It can't be painted.

 

[Ryan Clinton]

Oh yeah I got to meet palpy on Sunday.

 

[Ryan Clinton]

Started! This aluminum is a little thicker than what I used. Not the prettiest piece of u channel. Hopefully some of you will be ok with minor dings on these boxes. I'll smooth out what I can. They can be sanded down smooth I just don't have that much time. At least this is a solid piece except the side plates. 1.25 inch aluminum U channel is unfortunately really hard to find here. Most of what I found was decorative and 80$ for a short piece. Here you can see the difference on thickness. I'll take pictures of my modified cartridge feeder so you'll know how to mod your mg34's to accommodate the box. I also painted my shock since the originals are black. The engraving stands out much better after painted.

 

[Ryan Clinton]

I'll run a sand block on these. You'll need to anyways to paint. It cleaned it up a bit

 

[Jamesfett]

Holy crap this thing is heavy.

Hand me this on the battlefield and I say let's just go have a beer with the other side instead.