Mortal Immortal
New Member
I like how its looking so far. Keep up the good work.
New Hunter Reporting for Duty........Sir. Update pg 11.
- Thread starter Joker Laugh
- Start date
Joker Laugh
Jr Member
Hi Guy's,
A few people have asked me what I mean about the moving mandables so I have put together a little pic trying to explain.
O.K, The lower mandables are hollow so I can attach the top tooth of the lower mandable to wire, lets say a coat hanger etc. Bent around and fed into the head piece possitioned close to my mouth. Once glued and dry etc attach two small balls to the ends near mouth so when not in use i.e Bio is on they just stay there but when I go to take off the bio I hold the bio in place looking like I am going to remove it but realy I am possitioning the ends into my mouth so when the bio is removed I close my mouth and the pred mask will open his etc.
Its quite effective and gives off a little bit of relisim without using complicated motors etc. They wont move a huge distance like say a full roar but they deffinautley do move anouth to look cool
If you realy took your time you could attach the two top ones also but I just wanted to move the lower ones lol.
I had to make this pic using Larrys Pred head because I could not find a pic of a head that closely resembled the human face pic etc. Hope this is o.k Larry.
A few people have asked me what I mean about the moving mandables so I have put together a little pic trying to explain.
O.K, The lower mandables are hollow so I can attach the top tooth of the lower mandable to wire, lets say a coat hanger etc. Bent around and fed into the head piece possitioned close to my mouth. Once glued and dry etc attach two small balls to the ends near mouth so when not in use i.e Bio is on they just stay there but when I go to take off the bio I hold the bio in place looking like I am going to remove it but realy I am possitioning the ends into my mouth so when the bio is removed I close my mouth and the pred mask will open his etc.
Its quite effective and gives off a little bit of relisim without using complicated motors etc. They wont move a huge distance like say a full roar but they deffinautley do move anouth to look cool
If you realy took your time you could attach the two top ones also but I just wanted to move the lower ones lol.
I had to make this pic using Larrys Pred head because I could not find a pic of a head that closely resembled the human face pic etc. Hope this is o.k Larry.
Joker Laugh
Jr Member
Hi Guy's.
Well i've been busy working on the head and dreadlocks so I just thought I would share with you some new toys that arrived earlier today.
The Visor.
This fits the Pred head perfecautley, all I need now is to add a few new magnets to keep it in place.
The Shouldercannon.
This is way cool but still it needs a little work.
I will need to cut out the foam inside and add new wires etc.
I'll upload some pics of the head asap.
Well i've been busy working on the head and dreadlocks so I just thought I would share with you some new toys that arrived earlier today.
The Visor.
This fits the Pred head perfecautley, all I need now is to add a few new magnets to keep it in place.
The Shouldercannon.
This is way cool but still it needs a little work.
I will need to cut out the foam inside and add new wires etc.
I'll upload some pics of the head asap.
Joker Laugh
Jr Member
O.K Guy's,
The pred mask is nearley finnished so I will be adding a few update pics soon.
In the mean time I have been making a duck tape dummy lol.
For anyone who does not know what this is for .... well its a makeshift dummy to be placed into a costume suit so I can paint up the suit without actualy being in it at the time etc.... did that make sence ? I hope so lol.
Here is a quick tip for anyone going to make one. If you can get different coloured tape so when you come to cut yourself free and reasemble the dummy with more tape you can easily find where the correct parts are by looking for the different coloured tape, makes life that little bit simpler.
Next update will be the head painted.
The pred mask is nearley finnished so I will be adding a few update pics soon.
In the mean time I have been making a duck tape dummy lol.
For anyone who does not know what this is for .... well its a makeshift dummy to be placed into a costume suit so I can paint up the suit without actualy being in it at the time etc.... did that make sence ? I hope so lol.
Here is a quick tip for anyone going to make one. If you can get different coloured tape so when you come to cut yourself free and reasemble the dummy with more tape you can easily find where the correct parts are by looking for the different coloured tape, makes life that little bit simpler.
Next update will be the head painted.
Dark Huntress
New Member
that has to be the most colorful duct tape dummy I've ever seen lol
Joker Laugh
Jr Member
O.K Guy's,
Here is a few new pics of the painted head. I'm still going to be adding a few more details here and there but you get the idea lol.
Here is a few new pics of the painted head. I'm still going to be adding a few more details here and there but you get the idea lol.
YAUJA WARRIOR
New Member
SWEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
EEEEEEEEEEEEEET
MASK!!
EEEEEEEEEEEEEET
MASK!!
Dark Huntress
New Member
great paint job man!!
one and only
New Member
That looks like one evil mother ******!
Nice work!
Nice work!
Joker Laugh
Jr Member
Many thanks guy's. I'm glad you are liking him lol
Well today I added the quills.
I need them to be made from rubber so when I place on the bio they just bend down but once off they stand up again.
I decided to go and get a cheap rubber car mat. I managed to get one for only 50p
Then I cut a square out of the rubber mat and started to cut out some small quills.
I thought this would have taken me a long time to do but it seemed before I was even getting started it was already over
I then superglued them into place and left to dry. Once dry I gave them a quick blast of pva glue to make shure they stay there and once again when dry I painted them a gloss black.
heres some pics.
Well today I added the quills.
I need them to be made from rubber so when I place on the bio they just bend down but once off they stand up again.
I decided to go and get a cheap rubber car mat. I managed to get one for only 50p
Then I cut a square out of the rubber mat and started to cut out some small quills.
I thought this would have taken me a long time to do but it seemed before I was even getting started it was already over
I then superglued them into place and left to dry. Once dry I gave them a quick blast of pva glue to make shure they stay there and once again when dry I painted them a gloss black.
heres some pics.
one and only
New Member
Jeezz.... You're certainly giving Macguyver a run for his money!
Nice work!
Nice work!
Joker Laugh
Jr Member
Yea, you wouldnt belive what I can do with a rubber band and a straw lol.
lol.Similar threads
