-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke Shared stunt Version Lightsaber ( Run Full )
- Thread starter Spirit of ob1
- Start date
Randy,Back then i asked you if you had any more adhesive to drill the hole in clamp and you said no.However would you have a template/jpg (or other format) for us to print it and drill the holes in the right places?Anyone know if someone has a plan to create a chassis for this hilt? I think neither Goth3d ans Shtok are planning to do one.
Hey Wolf,
The Holes are 8mm and 4mm off the edge of the clamp, hope this helps
Canister is currently working on a chassis for this saber
The Holes are 8mm and 4mm off the edge of the clamp, hope this helps
Canister is currently working on a chassis for this saber
Hey Wolf,
The Holes are 8mm and 4mm off the edge of the clamp, hope this helps
Canister is currently working on a chassis for this saber
cool, thanks for the hole size, and I am gathering this is 4mm from the edge of the hole to the bottom of the clamp not center of the hole, also is the other hole at the half way point of the circumference? And how many mm away from the little square cut outs for the other two?
Does the copper neck part screw off, I thought it would but is very tight, wondering if that could be because it is copper on aluminum and may cause them to lock tighter due to metal properties.
Cheers, have to say it again, these came out awesome, very pleased with mine.
Did a little more work to mine, around the grip ring area. Used some cheap acrylic hobby paint to messily brush some black in the grooves.
Also adding some pics of the two clamp cards I've made, compared to the Slothfurnace version, just to show color and finish difference. One brass card was highly polished, the other sanded up to 800 grit, then brushed with steel wool.
Sent from my XT1080 using Tapatalk
Also adding some pics of the two clamp cards I've made, compared to the Slothfurnace version, just to show color and finish difference. One brass card was highly polished, the other sanded up to 800 grit, then brushed with steel wool.
Sent from my XT1080 using Tapatalk
Looking good.
Pixelpiper
Well-Known Member
I love the variety we're seeing from the saber in this run.
Hey Wolf,
The Holes are 8mm and 4mm off the edge of the clamp, hope this helps
Canister is currently working on a chassis for this saber
What is the diameter of the holes?
ImperialShuttle
Member
Wow, looking great. Really hitting the marks on looking like the original. Nice job.
The holes are 8mm diameter
I'm happy to announce that my D-rings are back in stock!
These are custom made D-rings. Made from nickel plated steel.
They are a perfect fit for Rudy's Luke V3 pommel (or any other V2 & OB1 ANH)
http://wannawanga.com/products/d-ring-only/
Roy
These are custom made D-rings. Made from nickel plated steel.
They are a perfect fit for Rudy's Luke V3 pommel (or any other V2 & OB1 ANH)
http://wannawanga.com/products/d-ring-only/
Roy
Pixelpiper
Well-Known Member
Great to hear. Is the profile of the D-ring for the Kobold different than the one pictured? The new stand-alone looks significantly rounder in D-bend than the one on your previous Kobold photos (and typically seen on V2 for example).
Hi, yours was shipped on the 18th, usually takes about 15days Hopefully it will get their faster. wolf69 took a while but it finally showed up.
I contacted the post office and they said starting this year, not all international packages will fully track unless you pay for priority. which sucks because had i known this earlier i could have told everyone. I was surprised because before everything tracked but i guess they changed it for some reason. Prob to get more money for shipping.....
Pixelpiper
Well-Known Member
Definitely to get more money, but some of that money probably also to pay the postal services of the other countries complaining that the USPS keeps too much of it for themselves.
Tracking on first class has been much worse this year than usual and some packages are taking longer than expected, but so far so good, everything's been delivered that I've sent out.
Tracking on first class has been much worse this year than usual and some packages are taking longer than expected, but so far so good, everything's been delivered that I've sent out.
Similar threads
