-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Luke Shared stunt Version Lightsaber ( Run Full )
- Thread starter Spirit of ob1
- Start date
DarkJedi360
Active Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Wow everything looks perfect!
Please Spirit of ob1, I beg you, make an accurate MPP replica after the shared stunt
http://www.therpf.com/member.php?u=358
Wow everything looks perfect!
Please Spirit of ob1, I beg you, make an accurate MPP replica after the shared stunt
http://www.therpf.com/member.php?u=358
Last edited by a moderator:
Pixelpiper
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Roman is supposed to already be working on an MPP - made in the US.
Roman is supposed to already be working on an MPP - made in the US.
Pixelpiper
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
If they're anything like the Graflex and DV6, then they won't be the kind of thing most people here are interested in and they won't be even remotely close to accurate.
If they're anything like the Graflex and DV6, then they won't be the kind of thing most people here are interested in and they won't be even remotely close to accurate.
russellsch
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
I am really excited for these to arrive!
I am really excited for these to arrive!
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
To be fair, accurizing a graflex 2.0 has been a fun project. I'm getting an MPP 2.0. but I've got one of Roy's shrouds, an older parks MPP repro clamp, grips from Roy... Need it in hand to see what else to swap out.
To be fair, accurizing a graflex 2.0 has been a fun project. I'm getting an MPP 2.0. but I've got one of Roy's shrouds, an older parks MPP repro clamp, grips from Roy... Need it in hand to see what else to swap out.
Pixelpiper
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
There's nothing you can do to a Graflex 2.0 to make it even close to accurate. The shape of the tube and bump-outs under the button and eye are completely wrong and can't be corrected - plus it screws together which is already a bad start.
Not saying it's not worth having nor not fun. It's just not a Graflex and not a replica. Just not my cup of tea at all. And don't get me started on the new DV6.
So that out of the way, Korbanth/Parks stuff shouldn't stand in the way of someone here starting a replica run.
There's nothing you can do to a Graflex 2.0 to make it even close to accurate. The shape of the tube and bump-outs under the button and eye are completely wrong and can't be corrected - plus it screws together which is already a bad start.
Not saying it's not worth having nor not fun. It's just not a Graflex and not a replica. Just not my cup of tea at all. And don't get me started on the new DV6.
So that out of the way, Korbanth/Parks stuff shouldn't stand in the way of someone here starting a replica run.
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
For people who carry around calipers are try to recreate every little scratch they see onscreen, no, the 2.0 won't be any good. But I have one next to my vintage from more than 12 inches away they look pretty similar.
For people who carry around calipers are try to recreate every little scratch they see onscreen, no, the 2.0 won't be any good. But I have one next to my vintage from more than 12 inches away they look pretty similar.
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Do you think ot would be possible to have the print you made to drill the holes?
i ordered my hilt late and there was no clamp with no logo available but fortunaly i have one on hand, so i plan to drill it my self.
not a fan of the silver tape to cover the clamp, i like my hilt "clean"
Do you think ot would be possible to have the print you made to drill the holes?
i ordered my hilt late and there was no clamp with no logo available but fortunaly i have one on hand, so i plan to drill it my self.
not a fan of the silver tape to cover the clamp, i like my hilt "clean"
russellsch
Master Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Just got my clamp cards in from Slothfurnace. I also ordered one for an ESB GRAFLEX build I'm working on. They are gorgeous! But I knew they would be, as I used his v2 clamp card for my Starkiller 2nd run v2.
Can't wait for the v3 stunt to arrive, to complete my Luke lightsaber collection.
Just got my clamp cards in from Slothfurnace. I also ordered one for an ESB GRAFLEX build I'm working on. They are gorgeous! But I knew they would be, as I used his v2 clamp card for my Starkiller 2nd run v2.
Can't wait for the v3 stunt to arrive, to complete my Luke lightsaber collection.
canister
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
For those interested I have purchased a 50 pack of small tac switches and have made a clamp holder for them. I should have the printer up and running in about 2-3 weeks then I can test print and change if needed. I will do a little pack of 2 switches and holder along with the chassis for interested parties. I will put it up on shapeways but I will be able to supply cheaper than them. Just need to check shipping is not going to kill the savings coming from NZ.
Designed to fit between the clamp and work with the Slothfurnace clamp cards.
For those interested I have purchased a 50 pack of small tac switches and have made a clamp holder for them. I should have the printer up and running in about 2-3 weeks then I can test print and change if needed. I will do a little pack of 2 switches and holder along with the chassis for interested parties. I will put it up on shapeways but I will be able to supply cheaper than them. Just need to check shipping is not going to kill the savings coming from NZ.
Designed to fit between the clamp and work with the Slothfurnace clamp cards.
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Depending on price I'd be interested
canister
Well-Known Member
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
I think between $8-12 for 2 switches and holder + shipping. Its about $12 just for the holder from shapeways in white strong plastic. Will look into the shipping.
I think between $8-12 for 2 switches and holder + shipping. Its about $12 just for the holder from shapeways in white strong plastic. Will look into the shipping.
Re: Luke Shared stunt Version Lightsaber ( Pricing Now Uploaded )
Sounds good, definitely interested then
Similar threads
