Jackieisrockin's IM3 Iron Patriot Pepakura Files! V2 files coming soon!
- Thread starter jackieisrockin
- Start date
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
I hear that man, at this rate i will have a hall of armor in no time:love
I want to make this..... I have too many projects I want to do...
I hear that man, at this rate i will have a hall of armor in no time:love
Murdoch
Sr Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
What picture?
murdoch,
as promised, here is that picture. hope it helps you out.
What picture?
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Here's a direct link to that scaling image (I put that together lol)
scalepic - Download - 4shared
Here's a direct link to that scaling image (I put that together lol)
scalepic - Download - 4shared
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
thank you for the orgional image, he must have a problem with his browser or something.
thank you for the orgional image, he must have a problem with his browser or something.
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Just got finished putting the fingers together real quick to check for the scale. I think they came out not too bad. they are a little loose, but just enough that they dont fall off when i tilt my hand forward. the thumb is a little big, but i might just scale that one individually.
I was thinking of putting a zip tie or something on the insides of the fingers to make them slide back and fourth and then re-align when they are not bent. Something kind of like this. if you look in the picture closely, there is some type of wire that is inserted in each finger to keep them together and create a sliding motion when they are bent.
Just got finished putting the fingers together real quick to check for the scale. I think they came out not too bad. they are a little loose, but just enough that they dont fall off when i tilt my hand forward. the thumb is a little big, but i might just scale that one individually.
I was thinking of putting a zip tie or something on the insides of the fingers to make them slide back and fourth and then re-align when they are not bent. Something kind of like this. if you look in the picture closely, there is some type of wire that is inserted in each finger to keep them together and create a sliding motion when they are bent.
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Here is an update on some hand files I'm re-creating in 3ds max to be used for 3d printing. Here is my progress so far. I still have some work to do to the palms. but all the fingers are done.
I will be uploading this to shapeways when it is all done, and i will post a link in here as well. I know a lot of people here use blender, so i downloaded it and i will make a .blend file as well so people who use different software can scale them to their hands. If you use something other then these two software's, just let me know an i will put them into the proper file format for you. Im not a fan of just giving out a .obj file, sometimes the poly's can get all messed up depending on what software you are importing it into.
Here is an update on some hand files I'm re-creating in 3ds max to be used for 3d printing. Here is my progress so far. I still have some work to do to the palms. but all the fingers are done.
I will be uploading this to shapeways when it is all done, and i will post a link in here as well. I know a lot of people here use blender, so i downloaded it and i will make a .blend file as well so people who use different software can scale them to their hands. If you use something other then these two software's, just let me know an i will put them into the proper file format for you. Im not a fan of just giving out a .obj file, sometimes the poly's can get all messed up depending on what software you are importing it into.
Irongatsu
Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
for the scale of pep, the simplest operation is to assemble all structure together, go to change stairs and enter the height "H" in inches (145.8 cm -> 1458 mm). see the width "W" and the depth "D" change together with the scale factor.
consider that you need to measure from ankle to neck. check the widths and depths of your body if you are good.
once you get the overall scale factor to Go and put in every single piece, to check if it matches the size of your body. (I had to change for example the thigh because it was too narrow).
contact me for questions that will help
for the scale of pep, the simplest operation is to assemble all structure together, go to change stairs and enter the height "H" in inches (145.8 cm -> 1458 mm). see the width "W" and the depth "D" change together with the scale factor.
consider that you need to measure from ankle to neck. check the widths and depths of your body if you are good.
once you get the overall scale factor to Go and put in every single piece, to check if it matches the size of your body. (I had to change for example the thigh because it was too narrow).
contact me for questions that will help
Murdoch
Sr Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Sorry about that. My browser was down or something. I had recieved the pic thank-you. I will be ordering designer3 thanx again... GM
Sorry about that. My browser was down or something. I had recieved the pic thank-you. I will be ordering designer3 thanx again... GM
Helagak
Sr Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Alright Jackie, your model is great and all. But holy heck was it a pain to unfold! I finally started work on the mini Patriot. As I said, I took your model and scaled it in blender to fit him, then exported it and unfolded it. It took me about 3 hours just to in fold the dang thing! SO MUCH DETAIL! haha. :lol I'll upload some pics after I get it built. I
Alright Jackie, your model is great and all. But holy heck was it a pain to unfold! I finally started work on the mini Patriot. As I said, I took your model and scaled it in blender to fit him, then exported it and unfolded it. It took me about 3 hours just to in fold the dang thing! SO MUCH DETAIL! haha. :lol I'll upload some pics after I get it built. I
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
How tall is your 'mini patriot'? That's gotta be a project and a half :thumbsup
Alright Jackie, your model is great and all. But holy heck was it a pain to unfold! I finally started work on the mini Patriot. As I said, I took your model and scaled it in blender to fit him, then exported it and unfolded it. It took me about 3 hours just to in fold the dang thing! SO MUCH DETAIL! haha. :lol I'll upload some pics after I get it built. I
How tall is your 'mini patriot'? That's gotta be a project and a half :thumbsup
Twisted6
Active Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
I hope you guys can release the file for the mini patriot too LOL
Alright Jackie, your model is great and all. But holy heck was it a pain to unfold! I finally started work on the mini Patriot. As I said, I took your model and scaled it in blender to fit him, then exported it and unfolded it. It took me about 3 hours just to in fold the dang thing! SO MUCH DETAIL! haha. :lol I'll upload some pics after I get it built. I
I hope you guys can release the file for the mini patriot too LOL
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
^^^ FYI pretty sure Helagak sized this suit specifically for his child, so the files won't do you any good unless you want to clone his kid
Here's the template for the cannon base mount in Pepakura. It includes an inner plate, outer plate, and suit track template for aligning mounting hole(s). The plates are individually sized to fit flush. The file is at default scale, so it will need to be set to your torso scale to fit.
**These are only templates for a secure mounting base. The templates will require trimmed or resized depending on your build.**
I am securing my inner and outer plates together with smooth-head machine bolts topped with wing nuts. I am also installing gaskets between the plates and the suit to prevent damaging the torso paint.
Here are pics and the file link if anyone wants to use these for their project:
IPcannonmountingtemplate.pdo
^^^ FYI pretty sure Helagak sized this suit specifically for his child, so the files won't do you any good unless you want to clone his kid
Here's the template for the cannon base mount in Pepakura. It includes an inner plate, outer plate, and suit track template for aligning mounting hole(s). The plates are individually sized to fit flush. The file is at default scale, so it will need to be set to your torso scale to fit.
**These are only templates for a secure mounting base. The templates will require trimmed or resized depending on your build.**
I am securing my inner and outer plates together with smooth-head machine bolts topped with wing nuts. I am also installing gaskets between the plates and the suit to prevent damaging the torso paint.
Here are pics and the file link if anyone wants to use these for their project:
IPcannonmountingtemplate.pdo
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
This is sweet man, thanks for putting this together. :thumbsup
^^^ FYI pretty sure Helagak sized this suit specifically for his child, so the files won't do you any good unless you want to clone his kid
Here's the template for the cannon base mount in Pepakura. It includes an inner plate, outer plate, and suit track template for aligning mounting hole(s). The plates are individually sized to fit flush. The file is at default scale, so it will need to be set to your torso scale to fit.
**These are only templates for a secure mounting base. The templates will require trimmed or resized depending on your build.**
I am securing my inner and outer plates together with smooth-head machine bolts topped with wing nuts. I am also installing gaskets between the plates and the suit to prevent damaging the torso paint.
Here are pics and the file link if anyone wants to use these for their project:
IPcannonmountingtemplate.pdo
This is sweet man, thanks for putting this together. :thumbsup
jackieisrockin
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Twisted6- the helmet looks good! Keep it up!
Teragon- Awesome! The paint looks great on the inner finger tubing! And the decals look awesome as well :thumbsup
Ladman- Your fingers are coming along nicely :thumbsup and the 3d print hand files look great as well
Helagak- :lol sorry about the unfolding troubles And feel free to upload the "Mini Patriot" link if you want, im sure everyone would love it
Laellee- Awesome file! Great thinking for that cannon base :thumbsup
Thanks for all the suit advice everyone. I made my Iron Man Mk VI suit with kind of a mixture of pep and foam (but in the end, only foam). I started to make a traditional pep suit and fiberglassed half the pieces and started to do the filler but then i discovered Stealth's amazing tutorials for foam building and made the whole suit and used Docholiday's method of painting which worked really well. I had to do a LOT of custom work to make it as movie accurate as i could, but all in all the suit came out pretty good :thumbsup
However, if/when i make this suit, i think ill try Quovadis' method, because it just looks so smooth and awesome:thumbsup
Twisted6- the helmet looks good! Keep it up!
Teragon- Awesome! The paint looks great on the inner finger tubing! And the decals look awesome as well :thumbsup
Ladman- Your fingers are coming along nicely :thumbsup and the 3d print hand files look great as well
Helagak- :lol sorry about the unfolding troubles
And feel free to upload the "Mini Patriot" link if you want, im sure everyone would love it Laellee- Awesome file! Great thinking for that cannon base :thumbsup
Thanks for all the suit advice everyone. I made my Iron Man Mk VI suit with kind of a mixture of pep and foam (but in the end, only foam
). I started to make a traditional pep suit and fiberglassed half the pieces and started to do the filler but then i discovered Stealth's amazing tutorials for foam building and made the whole suit and used Docholiday's method of painting which worked really well. I had to do a LOT of custom work to make it as movie accurate as i could, but all in all the suit came out pretty good :thumbsupHowever, if/when i make this suit, i think ill try Quovadis' method, because it just looks so smooth and awesome
:thumbsup
ladman
Well-Known Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Damm, therealtonystark does it again. Check out this boot protototype.
Iron Man Mark III Boot with Lever Design Prototype - YouTube
it where was some way to make this on the arms and boots, it would be a sweet edition to any suit.
Damm, therealtonystark does it again. Check out this boot protototype.
Iron Man Mark III Boot with Lever Design Prototype - YouTube
it where was some way to make this on the arms and boots, it would be a sweet edition to any suit.
quovadis0920
Sr Member
Re: Jackieisrockins Iron Patriot (IM3) Pepakura Files! Links in first post! Forearm a
Thanks man. Will post the videos soon. I'm nearly done with the 1st suit. Will post pics this weekend
However, if/when i make this suit, i think ill try Quovadis' method, because it just looks so smooth and awesome
Thanks man. Will post the videos soon. I'm nearly done with the 1st suit. Will post pics this weekend
