-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Hellboy Tooth Fairy (Dead or Alive)
- Thread starter rgriesbeck
- Start date
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Update - 12/15/14
I've been doing some testing and calculations and the pricing will be as follows:
1) A single tooth fairy, either alive or dead = $125 plus shipping
2) A single tooth fairy plus extra parts to make either (an additional head, arms, wings) that could be attached with hot glue and swapped = $160.00 plus shipping
3) Two tooth fairies, 1 of each = $200.00 plus shipping
I still need a week to get ready to start the run
Update - 12/15/14
I've been doing some testing and calculations and the pricing will be as follows:
1) A single tooth fairy, either alive or dead = $125 plus shipping
2) A single tooth fairy plus extra parts to make either (an additional head, arms, wings) that could be attached with hot glue and swapped = $160.00 plus shipping
3) Two tooth fairies, 1 of each = $200.00 plus shipping
I still need a week to get ready to start the run
TheRocketeer
Master Member
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
You know your not supposed to be saying anything about price here... If you dont wanna buy move along... Its very reasonable considering his printers are probably tied up almost all day printing just one of these guys.. I dont understand how people think 3D and 3D printing should just fall from the sky free of charge?? Takes time to do the 3D, then print it over and over until its right..size, printable so its not all messed up...then once you get it to that stage you can still get machine problems.. THEN once you have some good prints you need to remove all the supports..which I will tell you is way too much trouble for the $$ in my opinion.. so I would hold back on commenting about prices...
You know your not supposed to be saying anything about price here... If you dont wanna buy move along... Its very reasonable considering his printers are probably tied up almost all day printing just one of these guys.. I dont understand how people think 3D and 3D printing should just fall from the sky free of charge?? Takes time to do the 3D, then print it over and over until its right..size, printable so its not all messed up...then once you get it to that stage you can still get machine problems.. THEN once you have some good prints you need to remove all the supports..which I will tell you is way too much trouble for the $$ in my opinion.. so I would hold back on commenting about prices...
Mockle
Sr Member
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
I 3D print I buy my supplies I know about how long it take and even work involved not shooting anyone down... I said in pending price and not saying it an unfair price he can price it at what he likes to rich for my blood, wife would choke me out if I paid that... so let the man sell and you can PM any time,
I 3D print I buy my supplies I know about how long it take and even work involved not shooting anyone down... I said in pending price and not saying it an unfair price he can price it at what he likes to rich for my blood, wife would choke me out if I paid that... so let the man sell and you can PM any time,
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Grrr... Well I based the price on a formula I use, then I minused a bunch of money because it would have been closer to $200 per fairy. If we look at the groots I did, they were $55 each. This tooth fairy took way longer to model, and takes about 5 times longer to print and uses a ton more materials than groot did. So I thank TheRocketeer for his opinion, and he's right - it clearly states in the site rules, if you don't like the price, move on.
As you said above, you could have simply PM'd me. Hopefully this doesn't discourage others from buying what is easily the coolest statue we've done.
If you're still wanting a tooth fairy, there's one on eBay fof $699. But check with your wife first.
Grrr... Well I based the price on a formula I use, then I minused a bunch of money because it would have been closer to $200 per fairy. If we look at the groots I did, they were $55 each. This tooth fairy took way longer to model, and takes about 5 times longer to print and uses a ton more materials than groot did. So I thank TheRocketeer for his opinion, and he's right - it clearly states in the site rules, if you don't like the price, move on.
As you said above, you could have simply PM'd me. Hopefully this doesn't discourage others from buying what is easily the coolest statue we've done.
If you're still wanting a tooth fairy, there's one on eBay fof $699. But check with your wife first.
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Just a pic to show scale of the tooth fairy (compared to my groot)
Just a pic to show scale of the tooth fairy (compared to my groot)
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
so glad you finally finished this!!!!! gotta wait till after the holidays tho.......
so glad you finally finished this!!!!! gotta wait till after the holidays tho.......
TheRocketeer
Master Member
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Those clear wings are looking great, get one painted up
Those clear wings are looking great, get one painted up
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Thanks, I got one going to Frosty tomorrow!
- - - Updated - - -
Thanks, get on those props girl!
- - - Updated - - -
No problem, I hope to be printing them throughout the holidays
- - - Updated - - -
Thanks man! Boy the printer was fighting me today. Printing teeny pieces on highest detail is often fraught with peril. But I think I conquered it, we'll see in the morning. Always fun when an 8 hour print screws up and I'm not there to catch it :eek
Those clear wings are looking great, get one painted up
Thanks, I got one going to Frosty tomorrow!
- - - Updated - - -
Thanks, get on those props girl!
- - - Updated - - -
No problem, I hope to be printing them throughout the holidays
- - - Updated - - -
Thanks man! Boy the printer was fighting me today. Printing teeny pieces on highest detail is often fraught with peril. But I think I conquered it, we'll see in the morning. Always fun when an 8 hour print screws up and I'm not there to catch it :eek
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
So after successfully printing 2 prototypes, I started printing ones to sell (soon), fail, fail, fail (12 times)! But I think I've got it licked, successfully printed 2 in a row now (knock on wood).
As long as things keep going well, look for these to go up for sale within a week, hopefully I'll have a bunch printed and ready to go.
So after successfully printing 2 prototypes, I started printing ones to sell (soon), fail, fail, fail (12 times)! But I think I've got it licked, successfully printed 2 in a row now (knock on wood).
As long as things keep going well, look for these to go up for sale within a week, hopefully I'll have a bunch printed and ready to go.
picosbeak123
Active Member
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Those are good news! How big are them, rgriesbeck?
Those are good news! How big are them, rgriesbeck?
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Same size as the gentle giant one, just over 8 inches. But depending on how you pose them, the height will vary
Same size as the gentle giant one, just over 8 inches. But depending on how you pose them, the height will vary
TheRocketeer
Master Member
Re: Hellboy Tooth Fairy (3D Printed Kit) Final Version Pics on p. 4
Bump for a cool prop...
Bump for a cool prop...
