WORKING Singlepoint sights and sight kits are ready to go! Send me your email/paypal address and desired kit, and I'll invoice you in Paypal.
Years ago, I started doing an M32/M19 bronze scope for Bobadebt's blaster projects. As an aside, I also did a very limited run of aluminum cast Singlepoint sights that I machined out and fitted with red dot optic filaments, making them functional red dot sights. I also did runs of the clear conical tip cast in resin (hollow).
It's the 21st century now, so I decided to trying something new. I just drew up a Normark Singlepoint sight in Solidworks and am in the process of producing a working prototype sight on an FDM printer on the highest quality setting. Like my aluminum cast run, the sight body will accommodate a real fiber optic red dot rod. I painstakingly measured my sight to ensure accuracy, getting most all of the details you'd want from the original sight. It will have an acrylic lens for the eyepiece. The hollow conical tip will be produced on an SLA resin printer.
Here's the deluxe kit as it ships:
Here is the finished prop. This literally took 30 minutes of work....sanding, polishing, painting and assembly:
-------------------------------
I am producing these versions:
1. Deluxe Singlepoint (finished)
Complete Singlepoint sight produced entirely on an SLA resin printer. The conical tip is hollow and clear resin. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. The body will be opaque and include an acrylic lens and fiber optic red dot filament. The SLA printer produces remarkable detail and requires very little finish work.
Fully assembled and painted - $130 plus shipping
2. Deluxe Singlepoint (kit)
Complete Singlepoint sight kit produced entirely on an SLA resin printer. The conical tip is hollow and clear resin. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. The body will be opaque and include an acrylic lens and fiber optic red dot filament. The SLA printer produces remarkable detail and requires very little finish work.
Kit, includes lens, clear conical tip, and red dot filament- $90 plus shipping
2. Clear, hollow conical tip and red site filament - $30 plus shipping
Replaces the round Singlepoint tips on your real, round-tipped Singlepoint. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. Includes thin the red dot filament and cap to help mount it.
--------------------------------
Please let me know if you're interested in any of these options via PM or email.
Thanks!
tJ
Interest Lists:
Deluxe kit (unfinished):
Somerset - SHIPPED
PoopaPapaPalps
Pedro - SHIPPED
Deluxe finished:
russellsch - SHIPPED
Hollow conical tip:
Somerset - 1x SHIPPED
Cyberblock - 1x SHIPPED
Jedi Dade - 2x
Tom1999 - 1x
Years ago, I started doing an M32/M19 bronze scope for Bobadebt's blaster projects. As an aside, I also did a very limited run of aluminum cast Singlepoint sights that I machined out and fitted with red dot optic filaments, making them functional red dot sights. I also did runs of the clear conical tip cast in resin (hollow).
It's the 21st century now, so I decided to trying something new. I just drew up a Normark Singlepoint sight in Solidworks and am in the process of producing a working prototype sight on an FDM printer on the highest quality setting. Like my aluminum cast run, the sight body will accommodate a real fiber optic red dot rod. I painstakingly measured my sight to ensure accuracy, getting most all of the details you'd want from the original sight. It will have an acrylic lens for the eyepiece. The hollow conical tip will be produced on an SLA resin printer.
Here's the deluxe kit as it ships:
Here is the finished prop. This literally took 30 minutes of work....sanding, polishing, painting and assembly:
-------------------------------
I am producing these versions:
1. Deluxe Singlepoint (finished)
Complete Singlepoint sight produced entirely on an SLA resin printer. The conical tip is hollow and clear resin. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. The body will be opaque and include an acrylic lens and fiber optic red dot filament. The SLA printer produces remarkable detail and requires very little finish work.
Fully assembled and painted - $130 plus shipping
2. Deluxe Singlepoint (kit)
Complete Singlepoint sight kit produced entirely on an SLA resin printer. The conical tip is hollow and clear resin. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. The body will be opaque and include an acrylic lens and fiber optic red dot filament. The SLA printer produces remarkable detail and requires very little finish work.
Kit, includes lens, clear conical tip, and red dot filament- $90 plus shipping
2. Clear, hollow conical tip and red site filament - $30 plus shipping
Replaces the round Singlepoint tips on your real, round-tipped Singlepoint. I will sand the nubs off where the gates on the conical tip were, but you'll want to further sand the cone using progressively finer sand paper until you get the clarity you want. Includes thin the red dot filament and cap to help mount it.
--------------------------------
Please let me know if you're interested in any of these options via PM or email.
Thanks!
tJ
Interest Lists:
Deluxe kit (unfinished):
Somerset - SHIPPED
PoopaPapaPalps
Pedro - SHIPPED
Deluxe finished:
russellsch - SHIPPED
Hollow conical tip:
Somerset - 1x SHIPPED
Cyberblock - 1x SHIPPED
Jedi Dade - 2x
Tom1999 - 1x
Last edited: