Endgame Pepper Potts Costume

Manchester07 said:
It looks a bit small will that fit a adult? Do thease files usually have built in mounts on the other side that you can mount hinges or servos to?
Click to expand...

Will fit the average adult woman’s head. No mounting points for servo or arms. You could add that yourself. I’ll just be using magnets.
 
Natkins said:
WOW that turned out great!
Click to expand...

Thank you! I’ve started priming now.
AE140561-B72D-4B13-B097-5CAA32F7EA25.jpg
 
offearth said:
Honestly with Creality Machines (which I have 4 of) you’ll spend a lot of time chasing down issues and upgrading the printer. The Vivedino Raptor 2.0 is a great large stable platform and will get you where you want. Don’t cheap out on a printer you’ll end up sinking hundreds of more dollars into later on.
Click to expand...
I'm looking online for the The Vivedino Raptor 2.0 and I'm also seeing the formbot Raptor 2.0 is that the same machine? Sorry to go off topic.
 
Okay guys. I finished the paint job on the Rescue Helmet. Here’s the (almost) finished piece. Lighting up the eyes and adding magnets next!
 

Attachments

  • 37DA4456-4D0A-4001-B897-B5CC22C53278.jpeg
    37DA4456-4D0A-4001-B897-B5CC22C53278.jpeg
    1.2 MB · Views: 308
  • 4F3AEF00-E902-4824-A992-AD61F846D798.jpeg
    4F3AEF00-E902-4824-A992-AD61F846D798.jpeg
    1.3 MB · Views: 316
  • 02F1E407-88D7-4AC6-B66B-43A92F72F7F3.jpeg
    02F1E407-88D7-4AC6-B66B-43A92F72F7F3.jpeg
    1.8 MB · Views: 307
well I guess I will throw in my two cents here too...Also as an owner of a CR10 and formbot raptor 2, I will say they are both great machines, I've had the CR10 for like 4 years and it's still going, mind you with upgrades and much tinkering along the way, nothing mind melting though, and the Raptor 2 is more of a, turn machine on, hit print, walk away....prints like a champ every time. I have also printed the rescue helmet and was looking for more reference pics when I found this thread......so here is my print below, take into account this is raw off the printer, nothing done to it
20190819_225325.jpg
20190819_225331.jpg
 
Also, to add, this is a file I bought off of CGTrader for 20 bucks I think, it is not 100% accurate but it is really, really close, and I've always felt dod3d is just too expensive, but that's because I'm cheap....LOL. I think they make some really clean files and I have wanted to buy multiple ones, just can't get past being a cheap ass. offearth what paints and colors did you use, the paint job looks really great.......also if it looks small it is sized for a 14 year old girl and it fits her like a glove
 
offearth said:
Okay guys. I finished the paint job on the Rescue Helmet. Here’s the (almost) finished piece. Lighting up the eyes and adding magnets next!
Click to expand...
Sorry i'm late to the party but I am currently printing this helmet and I am trying to source the paint. You wouldn't happen to remember what paint colours you used. Struggling to find a good match for this suit.
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Rexermus
Captain America Endgame Boots?
Replies
9
Views
1,576
gregday
gregday
A
My Daredevil, s2 Costume
Replies
3
Views
234
AZ Groot
A
MattMunson
Ben Affleck DareDevil Costume COMPLETE!
Replies
2
Views
47
MattMunson
MattMunson
OfficerMD
Weathering Cap Endgame suit?
Replies
2
Views
677
OfficerMD
OfficerMD
Gonkdroid
Sandman costume
Replies
5
Views
496
George
George
Back
Top