DeAgostini Millennium Falcon by dtssyst

[Kuat]

Hello, about the Mörser Karl kit from Hasegawa,
is this the right one?

https://flic.kr/p/RamjuV

Thanks and greetings,
Kuat.

 

[Ageing Badly]

Hello emrumi, Ive decided to do as Ktaylor has and use M2 sized threaded screws and nuts,(going to need to bend that frame back the other way around).I've ordered some countersink posi headed ones,once they arrive I'll countersink all the fronts of the armature lugs so nothing will protrude any further forward.

- - - Updated - - -

Hello Kuat,
yes that is the right kit.

 

[Ageing Badly]

With respect to your worries about any alteration to the wall height it may be worth noting the both the frame and the plastic wall pieces measure 26mm. and were always mounted within the top and bottom sections of the hull framework.Also the side frames are mounted so that there is a gap between them and upper and lower frames,therefore there should be little or no discernible change to the overall height.If we then use plastic sheet to manufacture the shelf that the parts that we refer to as the missing parts sit on we can hide the metal framework. Hope this makes sense.....

 

[Kuat]

Thank you Ageing!

Next Questions:

Tamiya Jagdpanzer:
https://flic.kr/p/QYWp3X

Airfix Scorpion Tank:
https://flic.kr/p/QYWrDD

And the Agano Kit it's from Tamiya or Fujimi Modell ?

Thanks.

 

[emrumi]

Thank you Ageing!

Next Questions:

Tamiya Jagdpanzer:
https://flic.kr/p/QYWp3X

Airfix Scorpion Tank:
https://flic.kr/p/QYWrDD

And the Agano Kit it's from Tamiya or Fuhimi Modell ?

Thanks.

Yes Kuat, both those kits are correct and the Agano is the Tamiya kit.

 

[dtssyst]

The part needed from the scorpion tank is the very front part of the tank.

 

[Kuat]

Thank you guys!
It's not easy to find all the Kits...
Agano is rare here and some others.

The next one is the M3A2:
https://www.flickr.com/gp/mashku/05n8Y2

 

[emrumi]

Thank you guys!
It's not easy to find all the Kits...
Agano is rare here and some others.

The next one is the M3A2:
https://www.flickr.com/gp/mashku/05n8Y2

That's the one...

 

[Ageing Badly]

Be careful Kuat there are two versions of the Agano kit one of them doesn't contain the sprue with the parts you need.The kit you want has the item number31314**2200.

 

[Ktaylor]

Thanks for the heads up Ageing! I own 3 shiNano kits because I this same reason
:/ spoiler alert only one is correct haha

 

[Kuat]

Gentlemen has some of you a picture of the demag?
Thanks and Greetings,
Thomas.

 

[Ageing Badly]

This is the kit you're looking for.Kit number 099-E5018.

 

[Ageing Badly]

Parts 21 & 22 from the Demag and the 8rad part are nice and clear in this shot.
Thanks to Frank Becker for the pic.More of his pics can be seen on the"Re: 32" Millenium Falcon V.2" thread on this forum.

 

[dtssyst]

Hate to say it but we ordered it. Should be here tomorrow.

View attachment 698671This is the kit you're looking for.Kit number 099-E5018.

 

[Kuat]

Thank you all Again!
Today i get the Mörser Karl and the Panzer IV Lang.
I can't find the item on the spure from Karl it's only one, right?

And the Lang Tank is the tiny pipe?
Thanks.

 

[dtssyst]

I am sorry for not posting the photos with proper information as of yet. A lot going on at home. I will try and get this information re-posted over the next few days.

 

[Ageing Badly]

No apologies necessary dtssyst. A lot of us owe you a big debt of thanks for sharing,me especially.:thumbsup

 

[Kuat]

Yes, no hurry, Lady first!

 

[Ageing Badly]

Kuat the parts you want identified are,
Morser Karl sprue F part 31jagdpanzer IV 70L lang sprue B part10.

 

[dtssyst]

First post updated with more pictures on the way.