Agents of S.H.I.E.L.D.

Discussion in 'Free Replica Paper Props' started by DBCooper, Oct 11, 2013.

  1. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Strange thing I have been a member here on an old ID years and never came across this page until last week. So since I have created a new profile ID recently for cosplay it is nice to see so many people here since I thought I was the only person designing and offering designs and items.

    I have a facebook cosplay page where I put free designs on so people here are welcome to drop by - here is the link -


    http://www.facebook.com/Starlorduk/
     
  2. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    breen-

    I was going to redesign and produce these but Sean over at LEVELSEVEN bet me to them so it's something I am not doing now, but instead I am working on the SWORD design instead.

    I do like the HYDRA Cards but right now I can not afford the ink to produce them with my printing process until I have had a few orders come through :(

    I had major leg surgery last year and being self employed in the UK you do not get any financial sick pay or benefit after surgery.

     
    Cmdr.Kerner likes this.
  3. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Hello Sean - LJ here... I just advertised your work higher up... lol.....


    You're a dark horse you could have invited me here ages ago.... I've been putting free designs on my page and did not realise there was this SHIELD / HYDRA network too.

    - - - Updated - - -

    breen I have a few of these printed off as FRIDGE MAGNETS - but not the full set.

    Thank you for sharing them here.

     
  4. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    DB if there is anything you are missing let me know and will check my archives and see if I have any of your saved on my pc from earlier screen grabs..I do have quite a lot of peoples earlier work form google who I was not aware were here :)
     
  5. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Sean - I have the Hawkeye and Cap printed - two of my favourite posters :)

    - - - Updated - - -

    Dietrich - have you printed one of these off yet or would you like me to do one for you? :)

    - - - Updated - - -


    Dietrich - have you printed this off yet or would you like me to try it on my next run... I'm currently doing some science lab ones at the minute and only have about ten printable cards left?
     
  6. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I was doing them privately at conventions for friends but my A3 printer broke so I'm currently stuck on A4 print and smaller at the minute.

    I'd be interested but can not afford one at the minute... so will follow up later ;)

     
  7. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Hi ArgusUndercover,

    so far I printed only one of these for my prop exhibition 10 days ago. You may try if you like, but please send me a PM with your email address because I uploaded only a low-res version of this card and I can send you the hi-res card.

    Dietrich
     
  8. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Josh,

    I currently print plastic ID cards and design them too.

    Been thinking of swapping out the SHIELD WATERMARK for ages since I think it might look better as a multi-coloured hologram rather than the standard grey. It might look more authentic printed on semigloss plastic card too.[

    Which to me in multi-coloured would look mre authentic to a real ID card than the screen accurate cards ....

    Since most official ID cards incorporate holograms any way it would be ore authentic to reproduce the an hologram in multi colour.. since direct to transfer printing would not allow you any other way of doing it unless you used a hologram sticker which would look PI$$ POOR :(

    QUOTE=JoshBot;3517994]Here is the vector I have been playing with. Again, I know not all the forts are right, but that should be easy to fix for anyone who owns the fonts.

    https://drive.google.com/file/d/0By1l-OOcRa1aRlVWS19tOWI3Tnc/view?usp=sharing

    Additionally, I have been creating ID cards that I have seen in the show. here is a picture of the Agent Coulson ID But I have information for a lot more. I can post them a few at a time if people are interested. I will try to list what episode I get the information from this might also serve as a bit of an archive and history of the badge designs, as they seem to change from time to time. Any one have any input on this?

    View attachment 417617

    This is close to the original. We see Coulson's badge (Along with Agent Ward's and Agent Hill's) in digital form in the Season 1 Episode 1 "Pilot" at the 7:45 mark. I do not have the correct picture for Agent Coulson but this one worked for now.

    View attachment 417615

    This is my take on the ID card, and not 100% accurate. I have simulated a hologram seal just for fun. I also do not have a high resolution copy of the correct photo. If anyone has that, please send me a PM or post it here.


    [/QUOTE]

    - - - Updated - - -

    Josh,

    I currently print plastic ID cards and design them too.

    Been thinking of swapping out the SHIELD WATERMARK for ages since I think it might look better as a multi-coloured hologram rather than the standard grey. It might look more authentic printed on semigloss plastic card too.[

    Which to me in multi-coloured would look mre authentic to a real ID card than the screen accurate cards ....

    Since most official ID cards incorporate holograms any way it would be ore authentic to reproduce the an hologram in multi colour.. since direct to transfer printing would not allow you any other way of doing it unless you used a hologram sticker which would look PI$$ POOR :(

    QUOTE=JoshBot;3517994]Here is the vector I have been playing with. Again, I know not all the forts are right, but that should be easy to fix for anyone who owns the fonts.

    https://drive.google.com/file/d/0By1l-OOcRa1aRlVWS19tOWI3Tnc/view?usp=sharing

    Additionally, I have been creating ID cards that I have seen in the show. here is a picture of the Agent Coulson ID But I have information for a lot more. I can post them a few at a time if people are interested. I will try to list what episode I get the information from this might also serve as a bit of an archive and history of the badge designs, as they seem to change from time to time. Any one have any input on this?

    View attachment 417617

    This is close to the original. We see Coulson's badge (Along with Agent Ward's and Agent Hill's) in digital form in the Season 1 Episode 1 "Pilot" at the 7:45 mark. I do not have the correct picture for Agent Coulson but this one worked for now.

    View attachment 417615

    This is my take on the ID card, and not 100% accurate. I have simulated a hologram seal just for fun. I also do not have a high resolution copy of the correct photo. If anyone has that, please send me a PM or post it here.


    [/QUOTE]
     
  9. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Hi ArgusUndercover,

    on your Coulson ID card I noticed a little mistake: The barcode in the top yellow field should be black and not white.
    Providence_219.png
    Dietrich
     
    ArgusUndercover likes this.
  10. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    yes I know I changed it for the client... YOU MUST REMEMBER I have over 20 designs and many are tailored to individuals - I just put a variety up here which I could find easily on my pc. I occasionally give them the option of having white, black or multi coloured bar code and also the option of working and non working codes.

    I send them a private email with further info and ask them to choose a code of their choice :)

    Some codes do not print well - so for working bar codes they have to be printed larger as well.. screen accurate ID cards do not have working bar codes although I offer both working and non working.

    Non working are much easier to produce... although I also offer personnel greetings, hidden messages and SECRET AGENT messages encrypted within the bar code and it something I have offered fairly new to people who meet me when I perform as a cosplayer and character artist.

    I also produce screen accurate reverse images on the rear - or a fan made one by myself which takes you to my own fan page and vault with a selection of hidden case files and replica work - that way when I give a card to a child for their birthday at an event they can scan it with their phone or ipad and it enrols them as a junior member of SHIELD. Basically I try to get a fan young and inspire them in the virtues of being a good member of the community and fellow SHIELD AGENT?SUPER FAN.......


    I rarely release the rear image for the very reason it takes you to a VAULT of hi res images - I have currently two secret agent vaults set up online.... one as over 30 case files in with all personnel files of my own and a variety of hi res image ID Cards that way once some one as a super fan ID CARD they can scan it and save it to the pc or ipad and leave the images on screen saver scrolling through my own work as a portfolio like a photo viewer etc.

    It is some thing I have offered on a trial basis but for me to sustain it I will have to sell more as the bar codes facility is quite expensive. I am currently looking at alternative ways of hosting my own site for bar codes since It was costing me more than the cards I was selling :)


    Sorry some are screen accurate and others not.... some I have been commissioned to reproduce for people birthdays and events as such.. some have time expired QR CODES an
     
  11. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I also have to consider on my own fan page and character artist page, and instagram it is being monitored by directors and execs of marvel and lucasfilm as such I did not wish to come under their scrutiny too much with the items I was producing. As such I follow closely every one here and also online to try to not duplicate any thing any one else as unless they have given me permission or made it free.

    A few members know me here as do a few on deviant art and where possible I gain permission from fellow artists to use templates and work and upgrade them.

    You will see from my secret agent personnel files I use a template I think which was deisgned by Cal Schnatz JNr - I contacted Cal personally and asked his expressed permission to use his logos and templates and he was happy for me to do that. In fact I post my work on his facebook page also now.

    Sorry for the confusion - I do offer screen accurate cards - I just also offer alternatives too with what I feel enhancements the screen accurate ones miss out on.

    With the introduction of QR CODES and bar code technology I released a Version 2 which I try to incorporate for younger fans so I cam make them feel like they are connected to the show and community in a way that was not offered to me as a child :)


     
  12. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I was thinking of trying to get people here to put all the SHIELD ID CARDS together as a definitive thread from Season 1 to the current season and then along with the one's from the movie too. Since I also produce one's from the movie.. if you look at screen grabs of Coulsons from Iron man it is different to the screen grab of Coulson's ID card on the tv show Agents of SHIELD... I suppose this would not be uncommon if it was real too since with changes in security levels, and technology they would probably upgrade the cards.

    Def makes our job harder as prop makers and fans since if you look at screen grabs low res then look at them Hi res some clearly have faults also. You have to get a happy medium...

    I have just given around 10 away to a convention organiser as prizes for people entering the cosplay competition.. Some (I think were 2 screen accurate captain America winter soldier id cards which have the red banner), I also gave them a duplicate bucky and hawkeye which are not available any where else but made them with those characters on as well. I then included a screen accurate Coulson Card from I think Iron man 2, and then a screen accurate Coulson form the tv show agents of SHIELD.

    SO it would be handy if there was a page here showing all the various types under one definitive thread..... I'm using a old "Sony vaio" laptop and it crashes every few minutes so I have some difficulty even posting here at the minute :(

    I think if you look lower down any one unfamiliar with printing custom plastic ID cards - I gave a brief introduction. I tried to give an insight into some of the problems associated with "DIRECT TO TRANSFER" printing too and reproduction of images and quality.....

    I Love the community and support here..... I'm pretty much OCD on my own work and if some one wants a screen accurate card or prop and I have facility to print or produce it I will.. If any of my own work can be enhanced I try to as well.
    .
    Also if screen grabs can be authenticated that can help too.. Or if people wish to send me hi res screen grabs for me to sample and re work on cards I can do that on occasion :)
     
  13. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Yeah they look like the ones done by Iain Loveday in the UK - he uses vinegar to weather them and coffee/tea like I used to. He does nice items - he also does a range of DC and Batman paper props.

    He contacted me a few times to purchase mine, then I think he disappeared offline for a while or has me blocked for a reason I do not know of.

    I must say I do like his weathering - it is how I used to do mine on my personal displays but now I do them for others I do not have the time or room to weather any more. They look like the images repurposed off the marvel site - and a couple may be by Cal!

     
    Last edited: Jun 14, 2017
  14. AgentOfShield

    AgentOfShield Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    666
    I was working on a master template for the Avengers/AoS style ID way back when season 1 was airing but I never finished it. I was trying to figure out how to make an accurate watermark wave pattern and I was also trying to track down an accurate vector file of the MCU's classic SHIELD logo (there are subtle differences between the MCU version and the comics version).

    Here are some samples from my template that show all three colours of this version of the ID that were seen on the show:
    (Click for larger versions)

    blank_gold.png
    blank_red.png
    blank_navy.png
     
    ArgusUndercover likes this.
  15. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Lovely touch - Good timing too - I just tried printing these off on the card printer yesterday but any text smaller than 6/7 it blurs out. They are fine at 4 inch or laminated but when reducded to the plastic card format it causes lots of issues. It is very annoying because on screen they are HD/LOSSLESS, but when you print the software and printer just corrupts the small text on printing.

    So the text on the rear, and also the LOSS OF THIS CARD TEXT on the front, plus the digital numbers below the barcode all are unreadable when using direct to print method. I have tried using gimp/inkspace and PNG lossless and all various types of interpolation to no avail, but I now have 15 - B grade cards from Season 1 and Winter Soldier that will be now donated to a convention for competition gifts, or might give them a way to fans at the next convention for a small donation.

    Another issue to consider is the Red Banner card never prints very well on Epson printers.....in fact whilst the colour looks fine on screen.. what it prints on the card can be some what different. This happens more with the burgundy/dark red than light red.

    It also is the same with black text on all the banners below the bar code - some substantial loss in quality of the text is found. This is quite common and makes me wonder if that was one reason why you only saw it on Season 1. Although different methods of printing give slightly different out comes.

    It also makes me wonder if some images on screen where you can see more details on the card may be computer generated.

    The level of detail required on the ID card on small text may mean that a hobbyist prop maker might not be able to produce these with full accuracy, since a industrial card printer which uses a different process would need to be used and these work out at between 2k-4k depending on the printer and software used.

    Like I say no error or loss in quality is observed on screen. All my current templates and designs are HI RES.. but when printed the formatting and software corrupts small text!
    It is for this reason I may not produce these any more and just offer the digital download version of mine to be printed slightly larger for people to laminate.:(

    I might sell the designs to Marvel or a ID Card company for my new versions with working bar codes and QR codes on the rear. But for now it looks like I will have to buy these from another source rather than make them myself :cry

     
  16. AgentOfShield

    AgentOfShield Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    666
    The high pixel resolution is only useful when the DPI settings on your printer are set to the correct value, typically 300 DPI or more is standard for most prints. I've printed my design on a standard home colour printer and the text was legible.
     
    Yarooon likes this.
  17. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    will check that again ta - may be the Epson R265 just cant handle the resize that small. I have checked a few forums and it does suggest anything size "10" or less when reduced to 3inch and resized may be low res n out of focus etc :(
     
  18. AgentOfShield

    AgentOfShield Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    666
    Make sure the DPI on your file is at least 300 as well, typically web graphics are set to 72 DPI by default
     
    ArgusUndercover likes this.
  19. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Yes thank you - I did check that before saving and printing - if it changed it would have happened with the printing card software so I will look into this since I'm not going to print any more as I'm having too many with bad focus on the "LOSS OF THIS CARD TEXT" and the cards are not that cheap :(

    I'm usually pretty good on these type of things having been a micro electronics technician years ago - but this out of focus and resizing issue has just about got me stumped :(


     
    AgentOfShield likes this.
  20. AgentOfShield

    AgentOfShield Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    666
    Hmm, maybe ask your local print shop and see if they have any ideas? Or call the support line of the manufacturer?

     
  21. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    checked dpi - GIMP is set at 1050x600 for the template size and dpi300. Though when I export and save as PNG even though no settings have been altered - after saving and reopening in Irfanview it shows the new file/ is 72dpi... Even if I right click on the image and check properties it still shows 72dpi - so no idea why its reducing and lowering it there because at compression and saving I have not reduced quality or image at all.

    Checking on some DTP sites it says it might be set at 300 but when exported and saved some programs change settings to 72dpi anyway.. ALL RATHER CONFUSING

    All text appears ok on printing apart from "LOSS OF ID CARD" statement.

    In 15 cards tested of various designs - it seems to be where text is TEXT SIZE 10-14 on the master version, and then obviously when scaled down 50% to give you the printable size of 3.377 x 2.125 the statement is having problems.

    I will crack this ... lol... The difficulty is I am using GIMP for SHIELD CARD layout and editing, save to hi res png. Reduce size to printable size with Irfanview.

    And then I have to use this website --
    http://brainstormidsupply.com/id-card-printing-layout-tool.html

    Which imports the ID Cards and converts them to a workable PDF which is usable on a "ID Card Template" which is fed into the DVD/PHOTOCD tray of the Epson R265

    I have about 5 cards remaining to try to sort this out.. it is very annoying.. the card template and web site to convert to PDF is pretty much c spotless for business cards and ID cards with medium to large text - it is just smaller text on the Cards with small statements such as "LOSS OF THIS CARD" and that is often used on front of ID Cards, and on the reverse you have the fraud statement usually too.

    You can understand why some people provide the digital download only - if these are some of the problems you have to go through when printing 3x2 inch id cards.

    Just glad it's only a major issue on the SHIELD ID Cards and not others such as Dr Who, Ghostbusters, and NCSI or Star Labs as on those they tend not to have those fraud statements or "LOSS OF THIS CARD STATEMENT".

    Hopefully this will give some people a better understanding of the DIRECT TO PRINTER process of Printing Business Cards and ID Cards when using a printer with a printing card template that feeds into a printer where the previous dvd/CD label printing tray would have been.

    I Have to say I have provided some SHIELD/HYDRA cards to fans at charity events and birthday surprises and they have be blown away by them - although I'm OCD with these type of things and would like to iron the issue out and have a greater success rate on them on the plastic cards. If not, I will give those up and stop wasting time and resources, and order them off people here, and just go back to making the traditional larger laminated ID Cards.


    [/QUOTE]Make sure the DPI on your file is set at least 300 as well, typically web graphics are set to 72 DPI by default[/QUOTE]
     
  22. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    100_6058.JPG 100_6057.JPG

    About a week ago I got this ID badge holder from China and today I found the time to create my own S.H.I.E.L.D. ID card.

    Dietrich
     
    BrotherWilliam, Goldhawk and Mike J. like this.
  23. Caplan

    Caplan Well-Known Member

    Trophy Points:
    866
    Beautiful Dietrich:thumbsup

    Best

    Marc
     
  24. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Thanks Marc.
     
  25. kickman88

    kickman88 Active Member

    Trophy Points:
    262
    Thanks for the link!
     
  26. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Dietrich - I have a package to ship to you with some assorted ID's.. my treat. Not been online much and unable to ship has even though I'm still making paper props n taking commissions requests I have been let down alot, and have had no income since my surgery. I run you a couple of cards off as a surprise too ;) You may have them already - if you do just donate them when at a con - will try to ship as soon as I get funds cleared. hope you are all well?
     
    Brigandia36 likes this.
  27. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    those look awesome - didn't Sean from Levelseven produce some too and offer a full set for sale?
     
  28. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Oh what a surprise. Have you got my home address?

    Dietrich

    - - - Updated - - -

    Thanks LJ, you are correct, Sean is offering these ID badges and more, but I can make them on my own.

    Dietrich
     
    ArgusUndercover likes this.
  29. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I need to replace my SHIELD wallet badge for a larger version - never really happy with my last two from China they just seem a little too small.

    Didn't I see some where on here that Paul Elder did a updated design! Though did Paul get a C/D on these when they asked him to withdraw the Tony Stark headset too. If some one wishes to pm me Paul's page I'd appreciate it..
     
  30. Rook 3

    Rook 3 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,342
    ArgusUndercover likes this.
  31. BrotherWilliam

    BrotherWilliam Well-Known Member

    Trophy Points:
    567
    Has anyone got a decent screengrab of the Lighthouse postcard?

    EDIT: I've just been going back through the episode Rewind and compared the postcard to the one given to Coulson in The End and it looks like there's two different postcards, though the closeup one handed to Fitz may have been digital so it dissolved properly in the scene change.
     
    Last edited: May 20, 2018
  32. peterquill

    peterquill New Member

    Trophy Points:
    17
    i also want the postcard,
    i have been working on a screengrab from ep5, but still needs work.
    does this postcard actually exist somwhere or created just for the show
     
  33. peterquill

    peterquill New Member

    Trophy Points:
    17
    ive cropped it the best i can do, removing the RV is a problem

    [​IMG]
     
    renaissance_man and DrWeir224 like this.
  34. BrotherWilliam

    BrotherWilliam Well-Known Member

    Trophy Points:
    567
    Yep the first two images here are the stills from Rewind.

    postcard3.png SHIELD_S05E05-18-LakeOntario.jpg


    Yet these two photos of the "new" card both show the breakers around the base of the rocks
    Postcard2.png postcard5.png
     
    peterquill likes this.
  35. peterquill

    peterquill New Member

    Trophy Points:
    17
    ive had another crack at it,
    not perfect, but the best i can do so far, until i get hold of the blurays or another version surfaces

    it is a bit weird as to why theres different versions:confused
    (continuity error maybe)

    anyway enjoy

    [​IMG]


    [​IMG]
     
    Last edited: May 22, 2018
    breen2057 likes this.
  36. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I did an update to this the night after it aired - all the images were on the TRISKELION group on facebook. The lighthouse used was actually in MAINE not Ontario and from the insider reports they used a number of images to design the postcard, although when you compare all of them it looks like they may have used their own images from a drone too. They used the images in more than one episode as well. I and Cal Schnatz Jnr run Triskelion and provide monthly free SHIELD paper props.

     
    peterquill likes this.
  37. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Here's some of my latest work :) Enjoy.

    1-Peggy Carter Dossier, Screen Accurate SOE Envelope, and Peggy Carter Funeral Card from Civil War Movie - all reproduced by myself.
    2-Agent Koenig Case File / 3D Foil Ghost Rider which changes colour when you tilt it (designed and made by me :) )
    3-Hawkeye and Nick Fury SHIELD Version3 ID Cards, and Clint Barton /Phil Coulson Business Cards printed on parchment paper
    4-Ultra Rare Captain America Red Banner Winter Soldier SHIELD ID Card. Assorted other ID Cards I made for a convention recently.

    . Agent Carter_SOE_Dossier.jpg GHOST RIDER KOENIG case file.jpg Fury Hawkeye ID Cards.jpg capt america id cards.jpg
     
    BrotherWilliam likes this.
  38. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    A number of other props I made this week :)
    1-Another Variation of the Peggy Carter Dossier Cover - dossier holds some items from google and I directed the recipient to here as well so they could fill it.
    "I made it as a custom for a body double at Disney"
    2-SSR War Dossiers from the First Avenger
    3-Enhanced War Bonds Posters on 300gsm Matt Ice Paper Stock
    4-Bobbie Morse Secret Warriors Case File
    Peggy Dossier Set072017a.jpg Steve Rogers TFA_Dossier.jpg Steve Rogers_SSR TFA_Dossier1.jpg SW BOBBIE sale thumb_LJ.jpg

    - - - Updated - - -

    I probably have far too many case files and dossiers to host on here now since I now have over 70 case files from S.H.I.E.L.D. and possibly over 20 Dossier Covers..
     
  39. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Some more I put together -
    1-Secret Warriors Dossier - Case files inside Lincoln yo yo, joey, ghost rider, bobbi
    2-miscellaneous SHIELD Files
    3-SHIELD Recruitment Pack With 3 ID's
    4-Tom Holland/Spiderman SHIELD ID Cards for Cosplay, Tony Stark SHIELD ID Card and STARK ID PASS
    5-Assorted Case Files from a collection I donated as a gift to a charity
    6-SHIELD UK Logo I updated for a cosplay team in the UK

    Secret Warrior Dossier.jpg SHIELD Recruitment Pack 1a.jpg SHIELD recruitment Pack.jpg Spiderman ID SHIELD.jpg Triskelion Archive1.jpg Triskelionpropshopuk.jpg
     
  40. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    A couple of Dossier covers made for a friend-
    1-Infinity War - THANOS THREAT Dossier
    2-Agent Clint Barton - Death of Eric Koenig Dossier


    THANOS THREAT_case204_LJ.png KOENIG DEATH_case142_LJ.png
     
  41. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Peter I made the card the same night it aired, along with a number of other paper props - I hosted it on my instagram page for a week got no interest so I withdrew it and now it's in my collection. I did place images online too on TRISKELION also got no interest so deleted the post. You may see screengrabs of my work because I have a small following in that group who may have screenshot it without me knowing. I don't put every thing up here any more as I received a warning from moderators not to show my own work if I had it advertised else where.

     
  42. peterquill

    peterquill New Member

    Trophy Points:
    17

    thanks for the info,
    awesome collection you have, would love to see the postcard, im not on facebook tho,
    any chance you can upload anthing:D
     
  43. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Plakette.jpg
    View attachment Plakette.jpg
    Hi guys,

    here is a graphic from the last episode of season 5 from Marvel's Agents of S.H.I.E.L.D.

    Dietrich
     
    Bear, BrotherWilliam and repy like this.
  44. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Wanda Dossier I made..

    Wanda Dossier 2018_Gary Greig.jpg

    Also made some more ID cards...and a STARK DOSSIER..

    STARK Industries Dossier.jpg

    Close up of the Wanda Maximoff files

    Wanda Case File Missing Poster.jpg
     
    Goldhawk and BrotherWilliam like this.
  45. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    Stark Dossier I was working on.. along with a few others

    TriskelionHQ Archived Files_Promo1.jpg
     
    Cmdr.Kerner likes this.
  46. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I have been working on a number of items recently, but was waiting for a few months after infinity war before posting any thing.

    I can now show you the STARK INDUSTRIES Case File/Dossier I put together.

    I used a screen grab of three variants of STARK Folders to come up with the design, I then used a couple of ID Cards off this thread to print a couple of ID Cards and Luggage Tags, then finally I thought I'd try my hand at ANT MAN ID with the last BLANK ID CARD I had left. All turned out pretty well.

    STARK Industries Dossier.jpg

    Hawkeye RED BANNER ID Card is loosely based on the red banner ID CARD of Captain America in WInter Soldier Variation.

    Once I finished STARK I thought I would work on PETER PARKER CASE FILE, since Tony took Peter under his mentorship. I then came up with a Peter Parker Personne file for Peter. I made one file M.I.A. (Missing In Action) and a secondary one I designed DECEASED seeing as wiki now listed Peter Parker as deceased.

    20000102_094646.jpg

    Ejoyed doing the Peter Parker Dossier - once I finished the dossier I then made a Peter Parker / Spiderman SHIELD ID CARD. To save money when printing this card I decided to make the card reversible.

    20000102_091552.jpg

    Been a busy few weeks... Peter Case File finished prior to his demise on Infinity War.. I then went back to making some FBI style wanted posters for Crossbones, Banner, Wanda etc.. Below is an early sample of the WANDA variation.. it had a few grammar mistakes which were then corrected on later versions..

    WANDA MAXIMOFF WANTED FBI1A_RPF Teaser1.jpg
    Finally this week I printed a few more ID Cards off for people at my next con as gifts.. You can see them in the below image with one memo from Tony Stark I have designed.

    Tahiti Postcard Stark Letter.jpg
     
    Last edited: Aug 11, 2018
    BrotherWilliam, Teddz and repy like this.
  47. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    More Agents of SHIELD props - here I put together a Dossier named Project P.E.G.A.S.U.S.

    Project PEGASUS Dossier 1A.jpg

    Johnny Blaze was a cover printed off here and I sent it out as a FREEBIE to a fellow cosplayer. Maria Hill file was off wiki.

    I did wonder if the Maria file and designer was here somewhere but have not seen any post on it yet.

    As Project PEGASUS was a joint venture between SHIELD and NASA I chose a logo and design on the dossier cover which would be a mix of both logos.

    I also printed 2 new Project PEGASUS case files off and used a mix of inks which made the photos on the case files look like they had greater depth. Adding super gloss photo paper also meant that when the light caught the dark colours (shades of black and grey) actually looked like they were foil. Purely a optical illusion which had worked before with some success on the earlier GHOST RIDER Case file
     
  48. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    A better look at the Project PEGASUS Dossier cover
    Project PEGASUS SHIELD Dossier_ARGUS ID CARD_promo1.jpg

    Also took the liberty of doing a Dr John Blake SHIELD ID Card, Peter Parker SHIELD ID Card (Reversible Maske/UNMasked).

    Dr Blake driving license that came with phase one was so bad and cheap, made out of thin card I decided to make one and reprint it on 30mil, Hi Quality, Gloss, PVC card. At least that way it looks more authentic and will stand the test of time.
     
  49. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    More ID Cards made this week.

    SHIELD ID Cards made for conventions - decided to finally make a Agents of S.W.O.R.D. ID Card too.

    SWORD ID Card Sample1a.jpg

    When designing the Agents of SWORD ID Card I took screen grabs from past episodes and compared them with a couple I had seen online.

    I then amalgamated a few ideas. I utilised the visitor pass section idea from the original STARK Industries ID Cards which had VISITOR/PASS etched in red.

    I then chose the SWORD back drop from a hi res image from a space image off google.

    I included a fingerprint section although on a 3inch card it does look a fraction smaller than normal.

    Finally I had comets and shooting stars to the design so when viewed close up and at a distance your eye picks up different images on the card. Looking at the ID Card close you mainly focus on the COULSON ID Card as a whole and your eye naturally looks at three specific areas on the card. However look at the card from a distance and your eye naturally picks up the backdrop and shooting stars which is what I planned.

    Over all pretty pleased with how the Agents of S.W.O.R.D. ID Card turned out
     
  50. Miiyamoto

    Miiyamoto New Member

    Trophy Points:
    17
    Man i love this kind of props sooooo much, as a graphic designer this makes me VERY HAPPY
     

Share This Page