Agents of S.H.I.E.L.D.

Discussion in 'Free Replica Paper Props' started by DBCooper, Oct 11, 2013.

  1. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    does anyone have a template for furys toolbox cutouts. also what size is it?
     
  2. Teddz

    Teddz Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,136
    I don't have the templates, but I did get one of the ones that was made by a member... the name escapes me (just woke up, no coffee)

    But I can tell you how big it is... 42.5mm (1.67 inches) on all sides.
     
  3. bobatrek

    bobatrek Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,990
    I have the cutout template - I'll get it to you when I get home from work today or tomorrow if I forget.
     
    breen2057 likes this.
  4. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    thanks bobatrek
     
  5. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    any luck finding the template bobatrek?
     
  6. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Maybe I can help. By using the screenshot for reference I created this graphic. My built version is 2" on all sides, but I could only guess.
    Dietrich
    Toolbox.jpg aos216_1355.jpg
     
    breen2057 likes this.
  7. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    thanks Dietrich, looks great.
     
    Cmdr.Kerner likes this.
  8. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    No problem, glad I could help.

    Dietrich
     
  9. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    a nice clear pic of The Darkhold. anyone planning on making one.

    CvqLvBZVYAE3uaL.jpg
     
  10. Rook 3

    Rook 3 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,342
    The problem I have with the Darkhold... is the fact it says "Darkhold" on it. I mean really. No runes or anything?
    I hope next season they have an enemy with a weapon of mass destruction and stencil
    "Weapon of Mass Destruction" on the side.

    (^_^)
     
    Last edited: Nov 30, 2016
    Goldhawk and LorduDesign like this.
  11. renaissance_man

    renaissance_man Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,785
    I have 4 of the 6 pages drawn up and have the front "metal" embelishment for the cover ready to cut from styrene.
    I need to bind the pages into the covers.

    I will be posting a thread in the Marvel section very soon!
     
    breen2057 likes this.
  12. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    nice, cant wait to see your work.
     
  13. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    The book allows those to see in the language they understand and shows the text they are to be shown. Like it was in Binary for Aida.
     
  14. Rook 3

    Rook 3 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,342
    I know. I was just referring to the cover of the book, which says "Darkhold"... in English instead of Latin/Greek/Runes/Sanskrit, etc..
    Although, one cool feature is they were able to use the lettering, which spells the name no matter which way you hold it.
    Not unlike the last release of the Princess Bride on DVD, which read "Princess Bride" even if you held the cover upside down.

    princess-bride.jpg princess-bride-dvd-cover.jpg
     
  15. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    i like the look of the tv version of the darkhold. it looks way better than the comic version.

    Darkhold.jpg
     
  16. renaissance_man

    renaissance_man Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,785
  17. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    Anybody working on the Project: Patriot labels yet? I started but can't make out some of the text. Also working on a project file for it similar to the Pegasus one DB made
     
  18. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    aos410_2405.jpg

    The one in the upper right corner?
     
  19. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Project Patriot.jpg

    This is what I made so far. The rest of the words are not easy to read.

    Dietrich
     

    Attached Files:

    Last edited: Jan 23, 2017
    Bear, Lprimary and Yarooon like this.
  20. Richard Baker

    Richard Baker Sr Member

    Trophy Points:
    1,036
    If the contents of the book can alter appearance to appear in a person's native language, why not the cover as well? Aida might have seen the cover in binary (plus some cool inverted text illusion)
     
  21. Rook 3

    Rook 3 Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,342
    Have to watch the episode(s) again to see if they do a POV when Aida picks up the cloaked Darkhold from the Director's office.
     
  22. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    Dude that is great work on the Project Patriot label. I couldn't make out the writing underneath. and the numbers. Killer work man. I'm hoping we see a bit more of it.
     
  23. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Thanks for the kind words. At Marvel's Agents of S.H.I.E.L.D. they are using the Eurostile font family, that makes it a bit easier.

    Dietrich
     
  24. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    After straining my eyes just now, I got the bottom part it's "FOR IV USE ONLY". Now I need some tylenol...
     
    Cmdr.Kerner likes this.
  25. repy

    repy Active Member

    Trophy Points:
    341
    Or, maybe IM (Intramuscular)......
     
  26. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890

    Attached Files:

    Last edited: Jan 27, 2017
    Brigandia36 likes this.
  27. Brigandia36

    Brigandia36 Sr Member

    Trophy Points:
    1,536
    I think "30mg/mL" means nothing. Sure we can't see well the label but "30mg/ml." is a bit better. For those who are familiar with medics or vet products, they can confirm or not.
     
    Cmdr.Kerner likes this.
  28. Kris Lyssara

    Kris Lyssara Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,147
    mg/mL is correct marking, and means 30 milligrams of drug per 30 milliliters of liquid. mL is used over ml to avoid any potential confusion with the number 1, however unlikely it may be.

    With all that together, this is a drug used by injector at an unknown dosage, but with a ratio of 30mg of the drug suspended per 30 mL of unknown suspension fluid. Would be completely unsurprised if the back of the bottle had a bunch of "borrowed" medical semi-gibberish from another drug such as IM testosterone; I can see if I can get the actual text from a bottle of it for those interested in doing a back label.
     
  29. Brigandia36

    Brigandia36 Sr Member

    Trophy Points:
    1,536
    Thank you !
     
  30. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    [/B]

    Thanks a lot for your input Kris. And I'm looking forward for more text from the back.

    Dietrich
     
    Yarooon likes this.
  31. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    Working in a lab has its advantages, in person the blue is a bit too dark [without the light behind it] and the bottle's not 100% accurate but still looks pretty cool.
    Its 1 drop of blue food coloring and hand sanitizer. I have some icy blue icing coloring I'll try next.

    20170207_153147.jpg
    20170207_162758.jpg
     
    ArgusUndercover and Cmdr.Kerner like this.
  32. ArgusUndercover

    ArgusUndercover Active Member

    Trophy Points:
    239
    I'm currently new here
    but a few know me online.. LJ - Hope you will make me welcome here
    too.

    I'm currently printing waterproof plastic 30mil ID
    cards... I have been working on the Captain Rogers Winter Soldier
    card for a fellow captain America cosplayer, and the Phil Coulson ID
    card. I have done a few in the past for friends so thought I'd try my
    hand with a ID card template. This is the type you insert in to a
    standard printer!

    I have had a few samples blow out as the
    template I use is one that is free online. It is supposed to align
    the images I use onto the cards within the template inserted into the
    printer using Adobe photoshop n reader. However every now n then when
    I print the image/s will be misaligned on the cards within the
    template in the printer, even though on screen it looks perfect. This
    is very frustrating as on some card designs it works fine and on
    others its about 2mm out on printing.

    It can be a right royal
    pain in the a##, as it looks fine on screen, and printer settings are
    correct. I check calibration on the printer each time when I produce
    a new MASTER design to print, and also check settings on the page
    format, I also ensure the card design matches the measurements
    recommended by the company who produces the blank ID cards. It
    appears that on some images either adobe or the online template
    corrupts my settings by a minor fraction which puts the design print
    out by a few mm on the template. Which then results in the final
    print on the card being a few mm's too low.

    This is not too
    bad on some designs where the outer border is white, since the error
    is very negligible, however on ID Cards where the border is coloured
    it can look bad in my eyes.
    This can be slightly masked some what
    because when you place the ID Card into a plastic card holder where
    the card slides in horizontally the edge of the card are covered so
    the error within the card holder would be disguised. Call it a hidden
    illusion
    [​IMG]


    Rather than throwing these cards away - which I would
    normally do with a slight second (blame my OCD for this). I think I
    am going to take the slight faulty ID cards to conventions and give
    them free to children waiting for photos from me or our HERO team. At
    least they get a memento and something to hold onto.

    Another
    thing that is really annoying with ID card templates is you can
    produce a hi res image, then resample the size and tell it not
    compress or lower the quality, but occasionally when you print it
    off, the font or colour does not match what is on the screen.





    I know this does happen
    occasionally and I once saw a tool sold online that used to clip to
    your screen and monitor the colour and recalibrate your printer
    settings so what your printer published would correlate to what you
    saw on screen.

    I have even changed the inks to see if new
    inks, and different suppliers help, but it still happens on occasion.
    The HYDRA ID Card is such a hit and miss on colour I'm lucky if I get
    4 cards the same.





    As a last resort last
    week I changed the colour on the red using GIMP and the layering
    facility, even after changing the colour to a different variation of
    red and sampling 5 ID cards 3 were no where near matching to the
    colour on screen.






    All I can think is -
    that is what happens when using home printers, basic photo editing
    software and a 6 year old SONY VAIO..lol....

    The base
    templates used originally for the ID cards were free from Café
    press, deviant art or online. Where I have used them from deviant art
    I have credited the designer or where possible contacted them to ask
    permission to use their work.





    Non matching colour
    ERRORS printed seem to be widely common when printing the SHIELD ID
    Cards which have a Red banner at the top and black text below.



    SHIELD ID Cards
    print out with a more accurate print with the white border and YELLOW
    BANNER details - although occasionally may suffer from misalignment.


    The HYDRA badges
    which are darker and have the RED BANNER also have a larger error
    failure rate on print colours..

    The HYDRA ID Cards have a
    higher failure on colour when the top banner is that DEEP RED and the
    HYDRA text is BLACK from what I remember. Even though ID Cards look
    accurate on screen, and on the print preview upon sending to printer
    the colours being printed do not match the screen colours.






    I keep my fingers
    crossed that I do not get too many friends or cosplayers ask me to
    print the HYDRA ID Card, since it fails on the RED colour so much it
    is not cost effective to print the HYDRA ID Card unless I offset the
    printing costs.





    I have noted the colour
    discrepancy on my facebook page to esure any one requesting a HYDRA
    ID Card is aware a slight colour variation may result, and is not an
    error on my part but due to a software issue out side my control!









    Love the work you
    SHIELD fans and agents do here, and hope I can assist in some way at
    various times - kind regards LJ
     
    Last edited: Mar 19, 2017
  33. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    some Hydra posters that are in the upcoming agents of Shield episodes


    Greetings from The Framework.jpg


    Hydra Poster 01.jpg Hydra Poster 02.jpg Hydra Poster 03.jpg Hydra Poster 04.jpg Hydra Poster 05.jpg Hydra Poster 06.jpg
     
  34. bobatrek

    bobatrek Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,990
    Awesome these have finally made public - these are the ones I'm making a run of.
     
  35. Xolin

    Xolin Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    512
    ArgusUndercover and Bear like this.
  36. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Hydra ID Card.jpg View attachment Hydra ID Badge.jpg

    Based on the screencap from episode 4.16 What if... I recreated the ID card from Hydra. BTW: This episode is full of IDs, signs and so on.

    Dietrich
     
  37. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    Found these images online on Ryan Powell Meltons website he was a Graphic Design on AoS.
    enjoy

    Screen_Shot_2017-03-28_at_1.49.58_PM_gksotg.png.jpg Screen_Shot_2017-04-03_at_10.19.50_PM_zqe2en.png Screen_Shot_2017-04-03_at_10.22.28_PM_nfsujc.png.jpg Screen_Shot_2017-04-03_at_10.23.33_PM_evcavi.png Screen_Shot_2017-04-03_at_10.25.59_PM_og7xmm.png Screen_Shot_2017-04-03_at_10.38.33_PM_qi41o0.png.jpg Screen_Shot_2017-04-03_at_10.40.16_PM_u9w4lb.png Screen_Shot_2017-04-03_at_10.47.55_PM_qb9y8t.png.jpg
     
  38. Riceball

    Riceball Sr Member

    Trophy Points:
    2,416
    Anybody got any good reference shots of the Hydra soldiers, both black and OD? I already have some but I want to see if anybody here has anything better and clearer than I have. Also, anybody have an idea what the plate holder the Hydra troops are wearing? I suspect that it's production made but I'm not sure. I don't have any good images on hand at the moment but I'll try to get some up later.
     
  39. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Riceball likes this.
  40. breen2057

    breen2057 Sr Member

    Trophy Points:
    1,505
    another hydra id

    t3_67bzv7.jpg
     
    Riceball and Cmdr.Kerner like this.
  41. Riceball

    Riceball Sr Member

    Trophy Points:
    2,416
    Nope, I've been looking at another screencap site so I'll have to check this one out.

    Btw, I did manage to ID one of the plate carriers used by the Hydra tactical teams. The bunch that you see running around with P90s wear a plate frame from a company called S&S Precision, unfortunately they cost around $400 so there's no way I'm getting a real one just for a costume. I'm going to have to see what the airsoft gear makers have but I'd be surprised if they make a copy of them yet.
     
  42. jmaxwell522

    jmaxwell522 Active Member

    Trophy Points:
    341
    Here's two id's I used a camscanner on a screen shot to square and crop.
    New Doc 2017-04-26_1.jpg
    New Doc 2017-04-11_1.jpg
     
  43. kickman88

    kickman88 Active Member

    Trophy Points:
    262
    Yes, IM for intramuscular is what I see. Looks great BTW!
     
  44. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    S.H.I.E.L.D. Academy ID Card.jpg

    Here is my version of the S.H.I.E.L.D. Academy ID card.

    Dietrich
     
    ArgusUndercover and Bear like this.
  45. mynameschris

    mynameschris Active Member

    Trophy Points:
    341
    Goldhawk, Riceball and Keelan562 like this.
  46. repy

    repy Active Member

    Trophy Points:
    341
    So great!!! Thank you for sharingCdr Kerner :thumbsup
     
    Cmdr.Kerner likes this.
  47. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    100_4502.JPG

    Something new in progress: The third season ID card.

    Dietrich
     
  48. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    4.21.jpg Epinephrine.jpg

    As seen in the episode 4.21 of Marvel's Agents of S.H.I.E.L.D.

    Dietrich
     
    breen2057 likes this.
  49. Cmdr.Kerner

    Cmdr.Kerner Sr Member

    Trophy Points:
    1,890
    Last edited: May 31, 2017
  50. Teddz

    Teddz Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,136
    This isn't a prop, but since I had an aluminum HYDRA emblem already cleaned up and just sitting around, I took a nice Moleskine sketchbook my girl gave me as a gift, and bonded the emblem to it. I also have an aluminum SHIELD emblem I'm putting onto an iPad case, but it's not ready yet...

    [​IMG]
     

Share This Page