A Batman cowl model for 3d printing from Telltale series, so I just render in toon shading 
Cheers for next
Cheers for next
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Service 3D modeling design and services offer
- Thread starter skylu3Design
- Start date
Hello,
wanted to to see if you could help with a project. I sent ya a pm
wanted to to see if you could help with a project. I sent ya a pm
lol Thanks Al sure and just keep me posted when you ready, cheers!
Sure bro, anytime when you available!
---------------------------------------------------------------------------------------------------------------------------------------------------------
Another tailor made Iron Man Mark 4 chest/back armor in 2 piece design for 3d printing, as well as extended from the legs model
Keep working for more
sure and just keep me posted when you ready, cheers!Very nice work Boon! You're a machine and at some point, we'll finish this thing together!
Sure bro, anytime when you available!
---------------------------------------------------------------------------------------------------------------------------------------------------------
Another tailor made Iron Man Mark 4 chest/back armor in 2 piece design for 3d printing, as well as extended from the legs model
Keep working for more
Jyn Erso blaster modeled from Rogue One reference photos, and it's been printed out now
Thanks for sharing his result with me, much appreciated!
Bump for next!
Thanks for sharing his result with me, much appreciated!
Bump for next!
Batgirl Gauntlet from Arkham Knight, and with two piece design for easy wearing :
Hope you guy like it and bump for next
Hope you guy like it and bump for next
PM back to you bro, thanks.
---------------------------------------------------------------------------------------------------------
Here is another 3d print ready work for 1/6 scale size Jabbar's Sand Skiff 3D print ready model
, again it's scaled but not a small model to print lol
I remember it could be little bigger than the Tachikoma model from Ghost in the shell series I did in earlier stage :devil
Deck panel was made for CNC milling at alternate solution as it's flat and can have better strength over the model .
Cheers for next
---------------------------------------------------------------------------------------------------------
Here is another 3d print ready work for 1/6 scale size Jabbar's Sand Skiff 3D print ready model
I remember it could be little bigger than the Tachikoma model from Ghost in the shell series I did in earlier stage :devil
Deck panel was made for CNC milling at alternate solution as it's flat and can have better strength over the model .
Cheers for next
Attachments
Pm'ed you back, thanks
Here done with Bala-Tik / Guavian blaster from TFA and painted render. made it for easily lay on print bed too
Works moving on, cheers!cheers
Here done with Bala-Tik / Guavian blaster from TFA and painted render. made it for easily lay on print bed too
Works moving on, cheers!
cheers
Well, the last ad-hoc in this Redhood helmet was in years 2014 with more fusion design. Here we at 2016 and picking up guy's from his first thoughts and further work out the completion toward the original looks and feels.
Just having fun in making out something for earlier stage in ideas
[video]https://www.facebook.com/Skylu3D/videos/987060928082615/[/video]
with thoughts sharing and brainstorming, development, we finally got the design finalized. We both are happy the the end result, and parting and assembly design would be my turn to make things right for 3d printing
Final touched with some lighting and material rendering, this means to me a project completion (in 3D phase)
Hope you guy like itlol:lol, cheers!
Just having fun in making out something for earlier stage in ideas
with thoughts sharing and brainstorming, development, we finally got the design finalized. We both are happy the the end result, and parting and assembly design would be my turn to make things right for 3d printing
Final touched with some lighting and material rendering, this means to me a project completion (in 3D phase)
Hope you guy like it
lol:lol, cheers!
Last edited by a moderator:
dday
Sr Member
I can only recommend working with J. B. He does fast and really amazing work!
My pleasure mate, it was totally cool to share your final here
Thanks again.
Thanks Derrek! It's great to work with you too. J.B was the place I born not really my name lol
And here with the work I had done with Derrek, we been working with all the detailing and it turned out really good as expected!
And here with the work I had done with Derrek, we been working with all the detailing and it turned out really good as expected!
dday
Sr Member
Hahha J. B. yes, that names sense.... clearly there. I didn't want to say your name here even if I know it since I don't see it public on your profile skylu3Design; is a good "name" though! "
This is the master from the model done up.
My first mold was ruined due to silicone that didn't properly adhere to itself. So this week I need to pour a new one.
It's really an outstanding job in modeling. He is so easy to work with and responsive to requests. You can't go wrong by having him do up your design.
skylu3Design; is a good "name" though! "This is the master from the model done up.
My first mold was ruined due to silicone that didn't properly adhere to itself. So this week I need to pour a new one.
It's really an outstanding job in modeling. He is so easy to work with and responsive to requests. You can't go wrong by having him do up your design.
Last edited by a moderator:
Here with works update
A very nice detailing design Ursula Ray Gun from Tomorrow Land and we just brought it for 3d printing now.
Cheer up for next
A very nice detailing design Ursula Ray Gun from Tomorrow Land and we just brought it for 3d printing now.
Cheer up for next
Here with the Princess Leia slave chain model, designed to be taping in and swivel to open for putting together as a loop
Bump!
Bump!
Thanks bro, replied to you
----------------------------------------------------------------------------------------------------------------------------------
Project update
3D sculpted with details added to this Batman Gotham Knight cowl for 3d printing, and it's a 2 piece parts design in 1:1 scale shoulder guard is huge. But with the cape on it looks cool :cool
Keep on rolling ~ ~
----------------------------------------------------------------------------------------------------------------------------------
Project update
3D sculpted with details added to this Batman Gotham Knight cowl for 3d printing, and it's a 2 piece parts design in 1:1 scale shoulder guard is huge. But with the cape on it looks cool :cool
Keep on rolling ~ ~
Similar threads
