mostridigomma
New Member
Been making some progress:
Here’s some seam/flash removed
View attachment 779754
I finally got around to removing the inside guts of the grips. Along with filling in most of the text on both sides
View attachment 779755
Also, the crack to the right of the bolt action is almost completely gone
View attachment 779756
And lastly just for fun
View attachment 779757
@Soulinertia your grips rule :thumbsup
Looks great so far! I got just about that far and then had a super FAIL. I used a dremel to remove most of the water tank, buffed the entire gun with 0 steel wool for paint prep, sprayed 2 coats of primer, and then...dropped the damn thing while sanding down the last bits of plastic around the frame (those little nooks and crannies are pretty tough and the plastic is extremely brittle). The frame literally shattered. Luckily, I ordered 2 guns. Be very careful. You have to get that frame down flush all the way around or the grips wont fit right.
I'm working on a second project. Modding one of those toy guns from Amazon. I'm going to use the parts from my broken water pistol to fill in that gap in the middle. Progess so far...I need to sand down that second trigger and add the parts from the water gun...
Last edited: