ANH Luke Tatooine Farm Boy Collection

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Sep 30, 2018

• #21

Version 2 Macros I built

A little nicer build than my original - I used a Portumac Props transition box, added a more correct "not a mystery" plug with Seneca's laser cut piece, changed up my Seagull large knob, used 4 Kalimar knobs, and added a black frame around my new Bantha & Tusken transparency.

 

Kovnyn

Sr Member

• Sep 30, 2018

• #22

What about the poncho? Is it the same one seen in Mos Eisley when he sells his speeder?

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Oct 2, 2018

• #23

Kovnyn said:

What about the poncho? Is it the same one seen in Mos Eisley when he sells his speeder?

Click to expand...

yes, the Sideshow Farmboy Luke comes with the poncho, just haven’t put it on, it hides all Luke’s goods!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Dec 23, 2018

• #24

Finally got around to weathering the backed out lens frames

A few details on the Macros too and had to add C3-P0 and R2 to the mix

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 5, 2019

• #25

Had to have one!

 

Red Hawk

Well-Known Member

RPF PREMIUM MEMBER

• Mar 6, 2019

• #26

HB1098S said:

Had to have one!

View attachment 996785

Click to expand...

Awesome, Chad. No ANH display is complete without one!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 6, 2019

• #27

I guess I should buckle and strip the anodizing from the top portion....

 

russellsch

Master Member

• Mar 6, 2019

• #28

Your display set up is such awesome eye candy, Chad. Love it!

 

Red Hawk

Well-Known Member

RPF PREMIUM MEMBER

• Mar 6, 2019

• #29

HB1098S said:

I guess I should buckle and strip the anodizing from the top portion....

Click to expand...

That top portion should slide off the rest of the lens and paint comes off fairly easily with a 400+ grit sandpaper without leaving any marks. I followed up with #0000 steel wool just to be sure.

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 6, 2019

• #30

Red Hawk said:

That top portion should slide off the rest of the lens and paint comes off fairly easily with a 400+ grit sandpaper without leaving any marks. I followed up with #0000 steel wool just to be sure.

Click to expand...

Thanks bro, I’ll get around to it!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 6, 2019

• #31

russellsch said:

Your display set up is such awesome eye candy, Chad. Love it!

Click to expand...

Look who’s talking, thanks Russ!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 10, 2019

• #32

Weathered the Arriflex lens per Russ's method. Worked great, thanks buddy!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Mar 13, 2019

• #33

Modded my Macros so the EAIJ plug was a little closer. No way I'm spending $300 - $500 for one of these! I think this looks better

Also made the view hood able to close and clear the EL Bantha sheet

I'd like to wire up the Eumig On/Off switch to work for the EL sheet and add an Extracta board to the battery door!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Apr 21, 2019

• #34

I decided to add an Exacra circuit board to my Macros

I also used a thumb button from an Arriflex camera lens for the droid restraining bolt as my green tab, no way am I paying $350+ for this little part! It's close enough for me.

I'm calling these done!

 

nailuj

Sr Member

RPF PREMIUM MEMBER

• Apr 21, 2019

• #35

Yep. I would agree. Look great.

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Apr 21, 2019

• #36

nailuj said:

Yep. I would agree. Look great.

Click to expand...

Thanks!

 

thegnome

Sr Member

• Apr 21, 2019

• #37

Looks really good!

 

russellsch

Master Member

• Apr 21, 2019

• #38

Man, oh man, I love your builds!!!

 

TatooineMachine

Sr Member

RPF PREMIUM MEMBER

• Jul 22, 2019

• #39

Finally finished the bolt on the Arriflex Restraining Bolt

 

russellsch

Master Member

• Jul 22, 2019

• #40

A-mazing!!!