Water gun vs Sidkit:
Finally worked on my sidkit today!
Finally worked on my sidkit today!
View attachment 771367
All the seams are gone, the whole thing has been buffed up with 000, it took me a long time but i have finally managed to insert, fill and sand even the grip insert.
BUT I need help guys before I go ahead and fit the receiver cap in and weight it all, I've decided that if I was careful enough I could probably cut the magazine out, should I?
it would give me more things to work out like lighting and how I'm going to weight it (I was originally just going to fill it up with sand) and how I'd build up the inside but I am on the fence here I'm not sure, I need an opinion.
Thanks ArthurRackham I'm glad to hear that you think it works! I was worried about getting the right look with the wrong colour but its good to hear that it can work! And yes i used rub n buff just on a rag and brushed across the glossy parts with my finger; tried to make it look very scraped and used" I only managed to get the blue handled pistol, so tried to make it work in my favour as a futuristic plastic type deal!"
Whole thing ooks pretty damn good to me kri5! I never liked the look of the blue handle before, but you really pulled it off!
I also like your scratches on the black glossy area, is that rubn buff or another technique?
View attachment 771367
All the seams are gone, the whole thing has been buffed up with 000, it took me a long time but i have finally managed to insert, fill and sand even the grip insert.
BUT I need help guys before I go ahead and fit the receiver cap in and weight it all, I've decided that if I was careful enough I could probably cut the magazine out, should I?
it would give me more things to work out like lighting and how I'm going to weight it (I was originally just going to fill it up with sand) and how I'd build up the inside but I am on the fence here I'm not sure, I need an opinion.
Cut the mag out. It's not that difficult and the benefits are many.View attachment 771367
All the seams are gone, the whole thing has been buffed up with 000, it took me a long time but i have finally managed to insert, fill and sand even the grip insert.
BUT I need help guys before I go ahead and fit the receiver cap in and weight it all, I've decided that if I was careful enough I could probably cut the magazine out, should I?
it would give me more things to work out like lighting and how I'm going to weight it (I was originally just going to fill it up with sand) and how I'd build up the inside but I am on the fence here I'm not sure, I need an opinion.
I realised too late that I could do everything I wanted without splitting the gun. Have a long hard think about it.I was able to pry the orange grips off with an Exacto knife and some patience. The first side came off easily, but the other was really stubborn. The part where the grip meets up with the receiver was glued in so well that I ended up cracking it in 2 places in order to get it off. Fortunately I have Soulinertia's deluxe upgrade kit ordered so it doesn't matter.
View attachment 771999
Should I keep using the Exacto to split the two halves of the gun apart, or is there a better way to go about this?
I keep coming back to this Thread to torture myself.
I saw these 'cheap-accurate BR water guns' when it was first posted but I failed to buy one immediately. I thought 'Oh, it's a cheap plastic toy made in a factory in China. I'll be able to pick one up anytime".
Then when I remembered/decided to make the purchase, everywhere was sold out and the only way to get one is second-hand through a mark-up for $50+ the original price.
Cool as it is, I can't pay more than $15 for one of these. At the end of the day it's still a cheap, brittle plastic water gun.
I keep checking back hoping these things are going to be like the fidget spinner craze this summer.
You know, where fidget spinners were made and sold and they didn't cost much and you could easily get one anywhere.
Then suddenly everybody wanted one, they sold out, you could't find them anywhere, and the price went sky-high for the only ones you could find to purchase.
Before you knew it, everyone was re-stocked on them, nobody wanted them anymore, and now you can get one anywhere/anytime for nothing.
Eventually they have to make these water guns again in bulk, because only a fool would stop making them considering how well they sold. Offering these water guns again is like having a press to print your own money.
Fidget spinners are a fad. The Blade Runner blaster is an obsession.
BIG difference.
These will never be as available OR cheap as stupid fidget spinners made for ADD millennials and children.
Swing and a miss. I think you missed the ‘like the...(fill in the blank with anything popular)...craze’ part of my post.
But I do appreciate you educating me on the difference between one of the most iconic props in movie history from one of the most respected and iconic films of all time and a cheap throw-away toy.
Because now I know, and knowing is half the battle.
All good, no worries.
Has anyone heard if these guns are going back into production ? I’m checking several sites every few days but they are always out of stock.
Has anyone heard if these guns are going back into production ? I’m checking several sites every few days but they are always out of stock.