Wolverine all day baby! Jackets, belts, claws, oh my.
- Thread starter Bowelrock
- Start date
TheWolverine
Well-Known Member
JIMMY CLAWS Wolverine Claws X3 X-MEN : The Last Stand Worn By: Hugh Jackman
"Hugh's Soft Set"
\
Screen worn by Hugh Jackman!
Handles with an H on them identifying they are for Hugh. These are identical to other blades made with Jimmy Claws' exclusive mold, except they are soft blades instead of rigid blades. They have the same pvc, same color, but a lower durometer so that he could actually lunge in and stab someone without hurting them; as well as everything that led up to the point of contact is all usable on camera. So, instead of the entire scene generated with computer graphics, Hugh wore tracking balls or dots on his fists. this way he can go right in all the action that leads right up to the point where he stabs somebody is all usable on film. So the computer only has to do a small amount of work. That’s what they were made for and they were used several times. Because they are really safe, you can stab somebody on the side of the face and it won’t hurt them. They have a screen worn by Hugh Jackman providence. Original handles and wires and don't forget.......worn by Hugh! Produced using Jimmy's exclusive mold. This is a piece of authentic X-MEN movie history made by JIMMY CLAWS.
Lots more genuine, exclusive, X1, X2, and X3 pieces to come from Jimmy Claws. SNIKT
Please Check 'Em Out!
Flickr: James Logan Howlett
Twitter: TheWolverineBub
Facebook: James Lógan Howlett
JIMMY CLAWS Approved This Message
"Hugh's Soft Set"
\Screen worn by Hugh Jackman!
Handles with an H on them identifying they are for Hugh. These are identical to other blades made with Jimmy Claws' exclusive mold, except they are soft blades instead of rigid blades. They have the same pvc, same color, but a lower durometer so that he could actually lunge in and stab someone without hurting them; as well as everything that led up to the point of contact is all usable on camera. So, instead of the entire scene generated with computer graphics, Hugh wore tracking balls or dots on his fists. this way he can go right in all the action that leads right up to the point where he stabs somebody is all usable on film. So the computer only has to do a small amount of work. That’s what they were made for and they were used several times. Because they are really safe, you can stab somebody on the side of the face and it won’t hurt them. They have a screen worn by Hugh Jackman providence. Original handles and wires and don't forget.......worn by Hugh! Produced using Jimmy's exclusive mold. This is a piece of authentic X-MEN movie history made by JIMMY CLAWS.
Lots more genuine, exclusive, X1, X2, and X3 pieces to come from Jimmy Claws. SNIKT
Please Check 'Em Out!
Flickr: James Logan Howlett
Twitter: TheWolverineBub
Facebook: James Lógan Howlett
JIMMY CLAWS Approved This Message
comonbub
Sr Member
You're not gonna find anybody who makes those. And besides you're not gonna want steel ones because, those will rust faster than a hungry lion pouncing on a gazelle, aluminum won't.
superDrool
Sr Member
Nickel or Titanium won't rust like steel either. Anything with trace amounts of iron will oxidize. I have an aluminum set from 2005. Not the best, a little rough and the grip was a giant brick that was ungodly to hold and handle. Took me a month to get everything to fit in the palm of my hand comfortably and the wire around my knuckles. I found that wire coat hangers were the same gauge and made for a great fix when I needed to replace a connector from the claw to the grip.
wolfman10
Well-Known Member
Mine are stainless steel, they were made when X-2 came out and are official, but I can't remember what company made them. It's been over ten years now, hard to believe. They are cool, but they have a dull edge and I do not think they would hold up well if I tried to cut something with them (I think they would break off the handle). They look a little odd in my hands too. They are for display and it came with a X- plaque. No one makes steel claws that I am aware of, but they make stainless steel ones. I have seen a few on sale on ebay, bear in mind I can't speak for the quality of these I only have the official X-2 claws. Stainless steel is not completely rust proof, but for the most part it won't be an issue. Here is mine.
You can see me holding them in my avatar as well as the pictures on page 143 also.
You can see me holding them in my avatar as well as the pictures on page 143 also.
Last edited:
PrimoOptimoso
Sr Member
LOL, okay! I actually came upon this mirror in a store and snapped one last night - it'll have to do until I can get someone else to shoot a few =0)
Paulreeddrz
New Member
Vury nice! Glad you finally got it!
Those are some very nice claws indeed. I guess stainless steel would be the way to go but I haven't seen any that match the blade cut from the wolverine films. If I could just find the blade portions themselves I would have them custom fitted to my hands.
wolfman10
Well-Known Member
Thanks man, yeah I like my claws. Stainless steel works good for Wolverine claws, but I would love to have some claws made out of titanium, however it is so hard to work with titanium because of its melting point and other factors. Just like adamantium. haha
Primo, your jacket looks great!
wolfman10
Well-Known Member
New photo of the suit on Facebook!
and check out this interview. Hugh Jackman thinks a new Wolverine is 'inevitable' | NDTV Movies.com I dread the day that someone else is Wolverine instead of Hugh Jackman.
and check out this interview. Hugh Jackman thinks a new Wolverine is 'inevitable' | NDTV Movies.com I dread the day that someone else is Wolverine instead of Hugh Jackman.
What do you think of my homemade Wolverine costume? Ok ok...the cowl is from reevz and I had to use those plastic claws because of my low budget ^^. My brother (dressed as venom) ran a Marvel-themed costumeparty and I decided to cosplay Wolverine but all I found to buy was crap. So i had the idea to make one by myself. I wanted to create something that might work in real life but I have to admit that this was the first costume i have not fully bought in any store.
What do you say how it looks? (Beside my skinny shape ^^)
What do you say how it looks? (Beside my skinny shape ^^)
comonbub
Sr Member
You can tell Singer is behind this movie when Wolvie's sideburns are "feathered out" and pretty looking with a brush, that's the one thing I did not like about X2.....-____-
JLeezy23
Sr Member
As long as he didn't take reshoots and wears fake sideburns in random scenes haha. Hugh loves Wolvie and as long as they ask him, he'll take the role. Odd thing hit me about the future suit: the little symbols on the shoulders almost look like the bullet train logo in The Wolverine, almost lol
sanityattack
Active Member
They are hollow plastic and attach to a plate that sits on the back of the hand. I used them myself for an Ultimate Wolverine costume years ago by removing the spandex and putting them inside fingerless leather gloves.
sp1derman
Sr Member
Do you have any pictures are they more cylindrical likelihood the comic ones or are they more like the movie shape?
sanityattack
Active Member
I can probably take a couple of pictures later as I still have them. They are kind of a semi circle shape, curved tops with flat bottoms.
sp1derman
Sr Member
Be great of you could 
if they are curved onto hopefully my idea will work the claws will be hidden under my false arms so it looks like they actually come out of the top of my hands
if they are curved onto hopefully my idea will work the claws will be hidden under my false arms so it looks like they actually come out of the top of my hands
Similar threads
