joshvanrad
Master Member
The P90 is still the coolest SMG lol
Total Recall [2112] Bolo Gun Mystery [Pic Heavy]
- Thread starter JD Douglas
- Start date
-
- Tags
- total recall
When I first saw your pic I thought you had nailed it! :cry
I've been looking all over for this, but coming up short as well.
Damn you Total Recall!
- JD
joshvanrad
Master Member
Nope. Ps90 is a bull pup rifle.
I do love them tho
I have one.
joshvanrad
Master Member
Ha. I think we understand each other.
OneHotHemi
Active Member
Here's the info you guys are looking for. I think there's another thread too with these requests or at least for the EoTech.
The carbines used for the film were the Kriss Vector SBR's and SMG models. Vector SBR .45 ACP & Vector SMG .45 ACP
The sling is manufactured by BLACKHAWK! and is the Storm Single Point XT Sling BLACKHAWK! Storm Single Point Sling XT - BLACKHAWK! This series was made for Kriss and the rail attachment point is something they had custom cut for them as well. KRISS // Tactical Sling (no pin) - Slings - Firearms accessories & KRISS // Vector Low Profile Rail Sling Mount - Slings - Firearms accessories
The magazines are also produced for Kriss and consist of a Glock 21 magazine body and follower and custom extended housing. Magpul was contracted to make the mag extensions bodies as well. KRISS // Fully assembled 25+rd Glock 21 - Magazines - Firearms accessories
The flashlight holder is the 5 position milspec 1.2" Command Arms Accessories 5 position UFH4 holder not the 1" version. There are other Chineese knockoffs that look the same but don't hold up to the beating and actual weight of the flashlight they will have to hold. 5 Position and Laser Mount 1.1" - 1.20" Polymer Made | CAA - Command Arms Accessories
The forward grip model # MVG is also made by CAA Short Vertical Grip with Rubber Gripping Surfaces & Pressure Switch Mounts Polymer Made | CAA - Command Arms Accessories. Kriss sells a unmarked version on the web page as well again made by CAA for them although I think Kriss is now shipping the grips from CAA with their company markings on them, they were generic at one point. Vector SMG .45 ACP
The side rail which has nothing on it for the film is made by Kriss Vector and is proprietary to the real weapons. KRISS // Vector Side Picatinny Rail Kit - Rails & Grips - Firearms accessories
The flashlight is the Feit Electric 72325 LED Flashlight. The back button on the flashlight is painted over black but shows a yellowish orange coming through it. The flashlights appear to have had the markings washed off with paint thinner as you can still somewhat make out the logos.
The factory Diamond Back front and rear aluminum flip up sights were removed and an L3 EoTech 512 laser sight was mounted on the top of the Kriss Vector's factory installed rail. Product: 512 | L-3 EOTech Holographic Weapons Systems
Full load .45 ACP custom crimped blanks were made for the film and the BFA was produced by the armorer and threaded onto the factory reverse cut threads on the end of the weapon's barrel.
That should about cover the Kriss pieces. If you have any questions please let me know.
As for the Bolo gun it was custom made by the art department.
The carbines used for the film were the Kriss Vector SBR's and SMG models. Vector SBR .45 ACP & Vector SMG .45 ACP
The sling is manufactured by BLACKHAWK! and is the Storm Single Point XT Sling BLACKHAWK! Storm Single Point Sling XT - BLACKHAWK! This series was made for Kriss and the rail attachment point is something they had custom cut for them as well. KRISS // Tactical Sling (no pin) - Slings - Firearms accessories & KRISS // Vector Low Profile Rail Sling Mount - Slings - Firearms accessories
The magazines are also produced for Kriss and consist of a Glock 21 magazine body and follower and custom extended housing. Magpul was contracted to make the mag extensions bodies as well. KRISS // Fully assembled 25+rd Glock 21 - Magazines - Firearms accessories
The flashlight holder is the 5 position milspec 1.2" Command Arms Accessories 5 position UFH4 holder not the 1" version. There are other Chineese knockoffs that look the same but don't hold up to the beating and actual weight of the flashlight they will have to hold. 5 Position and Laser Mount 1.1" - 1.20" Polymer Made | CAA - Command Arms Accessories
The forward grip model # MVG is also made by CAA Short Vertical Grip with Rubber Gripping Surfaces & Pressure Switch Mounts Polymer Made | CAA - Command Arms Accessories. Kriss sells a unmarked version on the web page as well again made by CAA for them although I think Kriss is now shipping the grips from CAA with their company markings on them, they were generic at one point. Vector SMG .45 ACP
The side rail which has nothing on it for the film is made by Kriss Vector and is proprietary to the real weapons. KRISS // Vector Side Picatinny Rail Kit - Rails & Grips - Firearms accessories
The flashlight is the Feit Electric 72325 LED Flashlight. The back button on the flashlight is painted over black but shows a yellowish orange coming through it. The flashlights appear to have had the markings washed off with paint thinner as you can still somewhat make out the logos.
The factory Diamond Back front and rear aluminum flip up sights were removed and an L3 EoTech 512 laser sight was mounted on the top of the Kriss Vector's factory installed rail. Product: 512 | L-3 EOTech Holographic Weapons Systems
Full load .45 ACP custom crimped blanks were made for the film and the BFA was produced by the armorer and threaded onto the factory reverse cut threads on the end of the weapon's barrel.
That should about cover the Kriss pieces. If you have any questions please let me know.
As for the Bolo gun it was custom made by the art department.
Attachments
Last edited:
Holy guacamole, that's a lot of detailed info. THANK YOU!
I have to say, since my original post was after info on the Bolo gun, that reading that line after all the detailed KRISS info made me laugh out loud.
Any idea why the filmmakers decided to "hide" that gun in the editing? It looked fantastic to me.
Thanks again for finding and replying to this!
- JD
I have to say, since my original post was after info on the Bolo gun, that reading that line after all the detailed KRISS info made me laugh out loud.
Any idea why the filmmakers decided to "hide" that gun in the editing? It looked fantastic to me.
Thanks again for finding and replying to this!
- JD
OneHotHemi
Active Member
The current production flashlight isn't the same you have to find an earlier production one. Just an FYI
Just trying to locate the 5 position holder on the international CAA site, and it comes up with this:
CAA Tactical | Light & Laser Mounts | UFH3
However, this is 24-27mmm, is this the 1 inch version? Is this going to be 2 small?
CAA Tactical | Light & Laser Mounts | UFH3
However, this is 24-27mmm, is this the 1 inch version? Is this going to be 2 small?
Great info, Eric. :thumbsup
Sidewinder
Sr Member
I'm having trouble getting these items in the UK:
Short Vertical Grip with Rubber Gripping Surfaces & Pressure Switch Mounts Polymer Made | CAA - Command Arms Accessories
5 Position and Laser Mount 1.1" - 1.20" Polymer Made | CAA - Command Arms Accessories
Would anyone in the US be able to buy and ship these onto me? Obviously I'll pay whatever it costs, and give some extra for your time and effort.
Let me know if anyone can help.
Thanks
Lewis
Short Vertical Grip with Rubber Gripping Surfaces & Pressure Switch Mounts Polymer Made | CAA - Command Arms Accessories
5 Position and Laser Mount 1.1" - 1.20" Polymer Made | CAA - Command Arms Accessories
Would anyone in the US be able to buy and ship these onto me? Obviously I'll pay whatever it costs, and give some extra for your time and effort.
Let me know if anyone can help.
Thanks
Lewis
OneHotHemi
Active Member
Sorry, been away a while. Please keep in mind the 1" diameter CAA light mount will not work you need the bigger one due to the larger base bezzle of the flashlight. The flashlight has a removable end, but then gets thicker and then thinner again. Trust me I have one of the original guns from the film and have the part in hand. Go with the larger mount.
Similar threads
