Interest Star Lord Helmet and Map Projector **UPDATE 3-3-15 FINISH PROCESS page 7**

[jai]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Still interested in a finished helmet, or a kit.

 

[starlordquill]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Has anyone found something to use as the right angle tubes for the chin?

 

[MorbidCharlie]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I sent a PM on the projector a while back. Are you still doing a run on these? Haven't heard anything. Thanks!

 

[beardo]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Interested in a helmet kit, if you're still accepting requests.

 

[FallenIdentity]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

This helmet is insanely gorgeous; I'm trying to talk my husband into possibly purchasing one, if still available!!

 

[jai]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

No longer interested in helmet, thanks.

 

[B4DW0LF]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Has anyone found something to use as the right angle tubes for the chin?

I think I'm just going to model something up on the 3d printer

 

[starlordquill]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I think I'm just going to model something up on the 3d printer

If you do let me know!

 

[Trekcollector]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I would also be interested

 

[marvelou5]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

PM sent

 

[Parksdesign]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Deposit sent for helmet kit

 

[blastmaster]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I would like to get on the Projector List if possible, PM sent,
Thanks,
AL

 

[B4DW0LF]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

If anyone is wanting to make themselves the little chin pipes to go with the MDuckett helmet, I made up a pair on the 3D printer, they're not perfect but they do the job and look pretty good.

 

[MorbidCharlie]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I sent you a PM a while ago, but do not show that I ever got put on the interest list for the map projector. What is the status on the map projectors?

 

[akidnamedcesar]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

After I trimmed the bottom opening and cut the top open I was actually able to fit my helmet on without needing to cut it into 2 pieces. Not sure if anyone else was able to, it might just be that I have a tiny head though :lol

Here's a shot of it, I still need to finish sanding/detailing it here and there but I should be done by the end of the week.
(excuse the cell phone pic, only one I currently have on me)

 

[B4DW0LF]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

So sorry to meant to post the link to the chin pipes

http://www.thingiverse.com/thing:621750

 

[Maulfett]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I just got my helmet, great helmet thank you.

 

[dharma]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Cool helmets!!!!!!

 

[MDuckett]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

Hey thanks everybody. We spent our holiday season driving all over the midwest between families and are finally settling back into our routine. Work continues on the run and I'm getting close to halfway through it. Thanks for everyone being patient during a rather unexpected busy couple of weeks. Kits are wrapping up and finished pieces are getting very close. Updates on those to come.

I sent you a PM a while ago, but do not show that I ever got put on the interest list for the map projector. What is the status on the map projectors?

Sorry about my slacking big time on the projectors. I've been toying with a couple front plate designs to try and help with people installing their own electronics etc., and I've sent a couple orders out to try to get some feedback about them. Seems like so far the original design is the way to go, so I'll probably just send it out with that design. I'm just a stickler and keep trying new things before I do the run. Now I'm, what, a couple months overdue and this is become vaporprops, so I just need to get to it. Once I'm done with the helmet run I'll get on it and start taking payments etc for those. Sorry again about dragging my feet. And that reminds me I need to get the interest lists updated.

As for the chin pipes, I just wrapped up a little mold of some pieces. I was using some thin insulated cable for mine, kind of like on a game controller, but couldn't get it to bend to the right shape. Anyway I know I've sent out a bunch of kits, and if you've already gotten one and would like these I suppose I could just drop a couple in an envelope for you, at least for US folks. I'd have to check the postage for an overseas letter.



These are straight out of the mold without the sprue/flash cut off or filled

After I trimmed the bottom opening and cut the top open I was actually able to fit my helmet on without needing to cut it into 2 pieces. Not sure if anyone else was able to, it might just be that I have a tiny head though :lol

View attachment 422778

Wow that's crazy. My melon is in there pretty snugly. That would be so much easier. What are you using for padding?

Okay, back to the molding bench!

 

[starlordquill]

Re: Star Lord Helmet and Map Projector **UPDATE 12-3 RUN #2 TAKING DEPOSITS**

I'll take a set of chin tubes! Your helmet with Risu's lenses is going to look amazing!