Unlimited Run Spiderman Lenses - MCU, Amazing, Raimi, Comic, Superior, Scarlet, Gwen, Custom

Just wanted to add this to the thread.
Every Spider-Man I've ever done, I've used Tjack's faceshell. In 9 of them I used his lenses.
And don't bother asking for his exclusive paper bag faceshell mask kit. It was a one-off.
3480bd541569a870c610753a66d82a40.jpg


Sent from my SM-N920V using Tapatalk
 
Shipped out the first group of MCU frames today - looking forward to getting some feedback from the first recipients :thumbsup
 
Not sure if anyone is still reading this. But I have one of the hasbro masks, and intend to make it into my shell.

I was curious as to what is the smallest size magnets people have had success with? I see most people using a 1/4 inch magnet.... most of those come in 1.4 lb pull force. I most likely will use these.

I do have frames though, that already seem to have a good lense in it. I'm afraid the 1/4 inch magnets may be a tad too big for the frame, and will mess up the lense, and I'd like to avoid that if possible.

Has anyone had success with 1/8th inch magnets... which normally come in 0.7 lb pull force? Concerned about those because the pull force is half. But maybe they are still ok?

If you can help, I'd appreciate it.
 
so are these Tjack's frames and lenses?
MaveDays said:
Not sure if anyone is still reading this. But I have one of the hasbro masks, and intend to make it into my shell.

I was curious as to what is the smallest size magnets people have had success with? I see most people using a 1/4 inch magnet.... most of those come in 1.4 lb pull force. I most likely will use these.

I do have frames though, that already seem to have a good lense in it. I'm afraid the 1/4 inch magnets may be a tad too big for the frame, and will mess up the lense, and I'd like to avoid that if possible.

Has anyone had success with 1/8th inch magnets... which normally come in 0.7 lb pull force? Concerned about those because the pull force is half. But maybe they are still ok?

If you can help, I'd appreciate it.
Click to expand...
 
Just a head's up that I will be away for the majority of April so any orders received after April 5 will have to wait until I get back on April 27th.

So if you need anything fairly soon, I encourage you to contact me/send payment asap.
 
Hey TJack I know ur away right now but I would like to put in an order for MCU spiderman lenses that u have. I'm not sure if u have more then one option but I would like the open version, not squinty version if u even have different styles. Thx and get back to me when u can!
 
image.jpeg
A HUGE "THANK YOU" to TJack on my Agent Venom and my son's Superior Spiderman frames and lenses!
The guy is a class act, very easy to deal with and produces fantastic lenses.

:thumbsup
 
I would really be interested in just the lenses kit for the MCU Spider-Man is there any way you can do that for me
 
I am thinking on buying your bigger domed ASM2 lenses, with the old mesh. I'll pm you as soon as you're back!
 
Hi guys, friendly question here. What's the name of the white mesh material that is used for the spidey lenses? I have this idea to use it for my March Vick batman beyond cowl.
 
Travis,
Would you recommend your "Last stand" or "ASM2 large" for a Mark Bagley suit? Also could your non-fog lens material work on a large lens? I'm assuming you cannot curve a non-fog lens because it's lacking the clear dome? Thanks

Sent from my SM-N915W8 using Tapatalk
 
chad3122 said:
Travis,
Would you recommend your "Last stand" or "ASM2 large" for a Mark Bagley suit? Also could your non-fog lens material work on a large lens? I'm assuming you cannot curve a non-fog lens because it's lacking the clear dome? Thanks

Sent from my SM-N915W8 using Tapatalk
Click to expand...

Either style would work, but I think the last stand might be a better choice since the edges are thicker than the large asm2 and looks a bit closer to the comics. And yes you can use the new fog free mesh on the larger frames - Sunkistshark uses it on his last stand frames. But you are right - you can't shape it into a dome, it will only lay flat.
Hero of Justice - I use a few different meshes for my lenses so you need to be a bit more specific :)
 
Last edited by a moderator:
He track I'm new here I have already emailed you I forgot to mention what size magnet would you recommend for your lens thanks
 
Hash42 said:
He track I'm new here I have already emailed you I forgot to mention what size magnet would you recommend for your lens thanks
Click to expand...


No email from you, not even in my junk folder. I don't have any preferred size as some of my frames are thicker and bigger than others so I tend to use various sizes. The most common one I use is 5 x 3mm though.
 
Hash42 said:
Okay can you send me price message so I can tell which lenses I need thanks ps are the lens fog proof
Click to expand...


Not sure what you mean by a price message? Private message? I need to know what you want and where you live to get you a price. The only lenses that are fog proof are the mesh ones. If you want any domes then you will have fog issues - no way around it completely.
 
You must log in or register to reply here.

Similar threads

Arky
Unlimited Run TR-595 Custom Tricorder Kit
2
Replies
23
Views
2,365
Arky
Arky
ZRE1990
Romancing The Stone - Rabbit Statue
Replies
13
Views
1,469
EngravenImage
E
guabe
Interest Clan Saber Series #6: Darth Maul
3 4 5
Replies
95
Views
7,109
guabe
guabe
guabe
Limited Run Monarchy: a Laredo Sabers Original
Replies
1
Views
545
guabe
guabe
guabe
Interest Clan Saber Series #4: Plo Koon / Luminara Unduli
4 5 6
Replies
117
Views
11,069
guabe
guabe
Back
Top