Spider-man (Raimi) 3D Print Files/Pattern - FREE

Altough i need to do a heck of a lot of editing on it’s muscle shading to be usable for silk screening as well as it’s brick pattern to be more reminiscent of the 2002 movie when it comes to areas like the armpit and inner calves as the costume’s brick pattern transitions into honeycombs around those areas, as well as erase some of the muscle shading that wasn’t present in the 1st movie such as the ones around crus/cnemis and desaturate the shoulder’s muscle shading by 95% as well as erasing the excess.
 
There’s a problem wth kenlandrum’s layer of muscle shading in his psd file;
The problem is that it’s obviously made for sublimation printing but i’m going for the (2002) movie accurate, silk screening method.

so.. .
Can i comission guys to do draw a custom muscle pattern in photoshop with images provided as examples to show you what i’m asking for;
As because instead of sublimation printing it, i will silk-screen print it;
So whatever gradiance you guys add should not exceed to be more than very minimal, as seen in the image below;
As it’s one of the reasons i’m asking it from you guys draw it altogether as the ones publicly available online are for sublimation printing are full of grey tones,
as their grey tones aren’t suited for doing silk screen printing.

You should stay away from grey tones and gradiance and instead just try and replicate the look of this image with very high contrast, as i simply need only the shadows of the muscle groups as seen in the image below.

“To clarify, i’m talking about the white areas when i mean the shadows of the muscle groups not the darker areas of the image.

When it comes to other muscle groups, the same rules apply and so you should take reference from the 2002 raimi spider-man costume and can very well take reference from kenlandrum’s raimi spider-man muscle patterns but with this rule must applied.
 

Attachments

  • 55DD91B8-8FE6-4499-A189-14299030D573.jpeg
    55DD91B8-8FE6-4499-A189-14299030D573.jpeg
    67.9 KB · Views: 490
Can you send me the link too please?

EDIT: Sorry just saw the link. Thanks!
I'm almost certain I didn't change anything in that "kenlandrum.psd" file i uploaded but i found the original .zip file (the one he put on this fourm originally) on my hard drive if you want that one. I'll put a link soon I'm also gonna change the kenlandrum.zip link above to the new one below.

Here it is: spider-man-raimi-031614_v2.psd.zip
 
Last edited:
Perfect faceshell and 2002 pattern. Where did you get it?
My pattern? My pattern is from Comic Chris from instagram, but it's far from perfect. As for the faceshell, its El Fett's Spider-Man 2 shell. I plan on revisiting this suit soon with an accurate pattern and an actual 2002 shell! I've posted screenshots of the new pattern
 

Attachments

  • IMG_20201213_192447.jpg
    IMG_20201213_192447.jpg
    413.6 KB · Views: 598
  • IMG_20201213_192430.jpg
    IMG_20201213_192430.jpg
    417.4 KB · Views: 855
My pattern? My pattern is from Comic Chris from instagram, but it's far from perfect. As for the faceshell, its El Fett's Spider-Man 2 shell. I plan on revisiting this suit soon with an accurate pattern and an actual 2002 shell! I've posted screenshots of the new pattern
Hi. Who made the pattern you posted? Looks great!
 
...and we begin.


-------------------------------------------------------
Spider Files

View attachment 291435
http://www.kenlandrum.com/spider-man/frontSpider.ai


View attachment 291436
http://www.kenlandrum.com/spider-man/backSpider.ai

These are the 3D files extruded to 2mm and slightly beveled.
View attachment 291944

3mm thick versions
http://www.kenlandrum.com/spider-man/spiders-3mm.obj

http://www.kenlandrum.com/spider-man/spiders-3mm.STL

2mm thick versions
http://www.kenlandrum.com/spider-man/spiders.obj

http://www.kenlandrum.com/spider-man/spiders.STL

-----------------------------------------------------------------
Webbing Files

Zipped file for all of the web vectors.
Archive.zip

View attachment 293983View attachment 293984View attachment 293987View attachment 294009View attachment 294029

------------------------------------
Extruded/beveled 3D web files:
View attachment 296733View attachment 296944View attachment 296959

STL
3d_webbing.STL
----
OBJ
3d_webbing.obj
------------------------------------------------------------------

Pattern Files (Raimi Version)

View attachment 295913

https://drive.google.com/file/d/0B_sNvgA37t6qQktUN3N4MTZfTjA/edit?usp=sharing
Layered .psd (colors, muscle shading, bricks, webbing all separated)

spider-man_bricks.png
Bricks only, non-distorted version.

-----

spider-man_WEBS-031914_v2.jpg.zip
Flattened (with webs) .jpg

-----
View attachment 381490
spider-man-raimi-092614-PRINT_FILE.zip
NEWEST colors (web guides only, no spiders) "Ready-to-Upload" CMYK jpg

-------------------------------------------------------------------


3D Print Ready Face Shell
Sized to 23cm in height - 3mm thickness
View attachment 298944
3D_FaceShell.zip
3D Face Shell - print ready .obj & .stl formats

-----

3D Print Ready Lens Files

3D Lens Frames - print ready .obj & .stl formats
Sized to 85mm - Snap distance 3.2mm to accommodate 3mm thick face shell above + fabric

View attachment 300603View attachment 300604

STL:
raimi-frame-85mm.STL
----
OBJ:
raimi-frame-85mm.obj
Hi, can you please update the PSD file link? It says it doesn't exist anymore.
 
2B2DAE53-7912-4BDB-B2DF-72CF451B50FD.jpeg

So Ken Landrum, first of all I just want to say your work is incredible and by far my favorite is the Raimi suit pattern you made which is this one and I’m just curious to know and it’s OK if you don’t know! When it comes to dying the Suit pattern onto red and blue fabric, does the colors come out rich and beautiful like the suit from the film if you know what I mean?
 
... e começamos.


-------------------------------------------------- -----
Arquivos Spider

[ANEXAR] 291435 [/ ANEXAR]
http://www.kenlandrum.com/spider-man/frontSpider.ai


[ANEXO] 291436 [/ ANEXO]
http://www.kenlandrum.com/spider-man/backSpider.ai

Esses são os arquivos 3D extrudados em 2 mm e ligeiramente chanfrados.
[ANEXO] 291944 [/ ANEXO]

Versões de 3 mm de espessura
http://www.kenlandrum.com/spider-man/spiders-3mm.obj

http://www.kenlandrum.com/spider-man/spiders-3mm.STL

Versões de 2 mm de espessura
http://www.kenlandrum.com/spider-man/spiders.obj

http://www.kenlandrum.com/spider-man/spiders.STL

-------------------------------------------------- ---------------
Arquivos de teia

Arquivo compactado para todos os vetores da web.
Conheça o Google Drive - um lugar para todos os seus arquivos

[ANEXO] 293983 [/ ANEXO] [ANEXO] 293984 [/ ANEXO] [ANEXO] 293987 [/ ANEXO] [ANEXO] 294009 [/ ANEXO] [ANEXO] 294029 [/ ANEXO]

------------------------------------
Arquivos da web 3D extrudados / chanfrados:
[ANEXO] 296733 [/ ANEXO] [ANEXO] 296944 [/ ANEXO] [ANEXO] 296959 [/ ANEXO]

STL
Conheça o Google Drive - um lugar para todos os seus arquivos
----
OBJ
Conheça o Google Drive - um lugar para todos os seus arquivos
-------------------------------------------------- ----------------

Arquivos de padrão (versão Raimi)

[ANEXO] 295913 [/ ANEXO]

https://drive.google.com/file/d/0B_sNvgA37t6qQktUN3N4MTZfTjA/edit?usp=sharing
.Psd em camadas (cores, sombras musculares, tijolos, teias, todos separados)

Conheça o Google Drive - um lugar para todos os seus arquivos
Apenas tijolos, versão não distorcida.

-----

Conheça o Google Drive - um lugar para todos os seus arquivos
Achatado (com teias) .jpg

-----
[ANEXAR] 381490 [/ ANEXAR]
Conheça o Google Drive - um lugar para todos os seus arquivos
Cores MAIS RECENTES (apenas guias da web, sem spiders) "Pronto para carregar" CMYK jpg

-------------------------------------------------- -----------------


Face Shell preparada para impressão 3D
Medido até 23 cm de altura - 3 mm de espessura
[ANEXO] 298944 [/ ANEXO]
Conheça o Google Drive - um lugar para todos os seus arquivos
3D Face Shell - formatos .obj e .stl prontos para impressão

-----

Arquivos de lente prontos para impressão 3D

Armações de lentes 3D - formatos .obj e .stl prontos para impressão
Medido para 85 mm - Distância de pressão de 3,2 mm para acomodar o revestimento do rosto de 3 mm de espessura + tecido

[ANEXO] 300603 [/ ANEXO] [ANEXO] 300604 [/ ANEXO]

STL:
Conheça o Google Drive - um lugar para todos os seus arquivos
----
OBJ:
Conheça o Google Drive - um lugar para todos os seus

Alguém pode passar um link desse padrão Raimmi
 
Last edited:
View attachment 1472998
Então Ken Landrum, antes de mais nada, eu só quero dizer que seu trabalho é incrível e de longe o meu favorito é o padrão de terno Raimi que você fez, que é esse aqui e estou apenas curioso para saber e está tudo bem se você não souber! Quando se trata de tingir o padrão do terno em tecido vermelho e azul, as cores saem ricas e bonitas como o terno do filme, se é que você me entende?
pode me dar permissão para baixar esse arquivo?
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top