Silicone P1 Suit Evolution. Pg41 Hands Video 19/07/13
- Thread starter Usurper
- Start date
Dark Huntress
New Member
6'2 tall, 44 inch chest, 35 inch waist, hardly think thats skinny.
and besides id rather look this way, than look like a hippo pred.
LOL @ hippo pred
Darth Pinhead
Active Member
Even though I enjoy bodybuilding, I have to say that the "thin" Preds look more "real". Agility, stealth, quickness, are what they truly should be in my mind, not trudging hulking linebackers. Narin's sculpts are perfect examples. Though I consider Bodiee's comment to be nothing more than a whimsical joke (As in, not taking it as a dig to Lee nor starting a ridiculous defense to what is a joke) I must say that Lee's personal fitness endeavors are to be applauded, in and of themselves. In the 20+ years of being a gym rat, I have seen VERY few people accomplish the transformation of the likes of Lee, let alone continue the progress and not fall back into poor life habits. Part of me very much wishes I had the drive to pull my measurements down to fit in a suit of Lee's proportions (Too bad I have that damn ego with which to contend)...
OK, Lee, where's the update. We all know you did something in the last 24 hours,
OK, Lee, where's the update. We all know you did something in the last 24 hours,
Thanks Brad.
I know preds come in all shapes and sizes, and i did not loose weight for a suit, my last suit pictures when i was on the roof, i weighed about 14lbs heavier and thought i didnt look too skinny or fat then.
as for doing something on the sculpt, sorry no i did not, but i did do something i hope to try on the sculpt tomorrow, and if it works i will update then
thanks again dude, appreciate the feedback on me as well as the sculpt.
I know preds come in all shapes and sizes, and i did not loose weight for a suit, my last suit pictures when i was on the roof, i weighed about 14lbs heavier and thought i didnt look too skinny or fat then.
as for doing something on the sculpt, sorry no i did not, but i did do something i hope to try on the sculpt tomorrow, and if it works i will update then
thanks again dude, appreciate the feedback on me as well as the sculpt.
Darth Pinhead
Active Member
I have long held that weight is irrelevant when determining physical health/appearance. I have been illustrating that with my daughter, as of late. Though she has actually gained a pound through training for a little over a week, she has lost 3" in her hips. Weight is irrelevant and scales should only be used to measure silicone and resin powders,
No apologies needed, Lee; totally busting chops out of my own excitement and somewhat obnoxious anticipation of seeing your updates (Keeps me motivated to continue with my own drag-out projects, ). Hell, it is YOUR project. Looking forward to the future update!
No apologies needed, Lee; totally busting chops out of my own excitement and somewhat obnoxious anticipation of seeing your updates (Keeps me motivated to continue with my own drag-out projects, ). Hell, it is YOUR project. Looking forward to the future update!
Right then, I had roughed out the back main underlying detail ( tedious tedious couple of hours that was ) So i figured i would try my and at texture stamps. below is what i did.
1st i made some rough random blobs. the lighter is there so you ca see the size of them.
then i took a little tool and roughly blended the edges in.
I then hit the sculpts with some white spiritsand my butane torch to melt it quickly, and soften it up.
On the bigger one i made some smaller lumps and then again blended them with white spirits and heat, melting them back into the main body of the sculpt.
Quick water based clay wall, clear coated , into which the silicone was poured.
Here is then the stamps, poured out of some RTV silicone.
Now for the fail part.
My intention was to overlay the 2 bigger sculpts, but it did not yeild particulary good results, so i am going to try just the bigger one and really knock them back then with water. this was really just a little test i guess so i am not too botherd.
the smaller sculpt which i did not expect much of, gave me great results if i overlapped, and will save me alit of time when i finish up the softer details.
1st i made some rough random blobs. the lighter is there so you ca see the size of them.
then i took a little tool and roughly blended the edges in.
I then hit the sculpts with some white spiritsand my butane torch to melt it quickly, and soften it up.
On the bigger one i made some smaller lumps and then again blended them with white spirits and heat, melting them back into the main body of the sculpt.
Quick water based clay wall, clear coated , into which the silicone was poured.
Here is then the stamps, poured out of some RTV silicone.
Now for the fail part.
My intention was to overlay the 2 bigger sculpts, but it did not yeild particulary good results, so i am going to try just the bigger one and really knock them back then with water. this was really just a little test i guess so i am not too botherd.
the smaller sculpt which i did not expect much of, gave me great results if i overlapped, and will save me alit of time when i finish up the softer details.
Results from trinkering.
Still have to knock back some of the detail in places. but it is getting there i guess. I am NOT wanting a red that looks like he has warts all over his body, so along with a streamlined muscle look, his detail will not be overdone either.
Sorry for the back picture being so crappy light was fading fast and the stand is screwed, so i cannot risk moving it at present.
Still have to knock back some of the detail in places. but it is getting there i guess. I am NOT wanting a red that looks like he has warts all over his body, so along with a streamlined muscle look, his detail will not be overdone either.
Sorry for the back picture being so crappy light was fading fast and the stand is screwed, so i cannot risk moving it at present.
Darth Pinhead
Active Member
Though I tend to prefer the suits where it looks like the guy has some serious skin condition that will require a team of doctor's from around the world to cure, I'm really digging this concept and how well you're bringing it to life. That back looks awesome, so far, as do the subtle skin textures on the front. Really going to look great in silicone. OK, keep at it. Gotta finish before the knee gig, lol...
Darth Pinhead
Active Member
Oh, please. What's the worst that could happen? You wake up with a sore arse and feel something ticking (Doc's watch) in your knee...
Didnt come out of anestetic too well last time
all will be good, i didnt work my ass off on this silicone stuff to get dead any time soon.
Oooh by the way, got the HD wem cam sorted , youll have to jump on stickam sometime, i can show you the sculpt and the P1 in live HD woohoo.
all will be good, i didnt work my ass off on this silicone stuff to get dead any time soon.
Oooh by the way, got the HD wem cam sorted , youll have to jump on stickam sometime, i can show you the sculpt and the P1 in live HD woohoo.
Got a couple of hours this morning to check it out properly. and again decided against over texturing him. I will be cleaning up some of the details knocking back the warts, and maybe tweaking a few minor things, but this is basically it done now.
Things done to finish him off were, Fine texture all over chest, quill holes on torso, shoulders and back. a FEW bigger texture/warts, belt detail and buckle detail.
anyway , thanks for looking.
Lee.
Things done to finish him off were, Fine texture all over chest, quill holes on torso, shoulders and back. a FEW bigger texture/warts, belt detail and buckle detail.
anyway , thanks for looking.
Lee.
strugglingrunt
New Member
bravo lee! loving the torso mate, glad to see plenty of holes for quills on the body alot of people forget to do them
Darth Pinhead
Active Member
I'm really digging it and loving the blending of the various textures but I'm questioning having any warts. I think your sleek concept is much cooler, but that's just me....
Dark Huntress
New Member
Astonishing as always, Lee! You never disappoint! The torso looks absolutely fantastic and I can't wait to see it all come together
nighthunter
Well-Known Member
I think a next MASTERPIECE is on the way!
I Love our Sculpting and Molding Threats !
Don`t forget Pics Lee!
If you are Planing to do some legs after your torso sculpt ?
I Love our Sculpting and Molding Threats !
Don`t forget Pics Lee!
If you are Planing to do some legs after your torso sculpt ?
Similar threads
