ObiWanJacobi
New Member
So just to clarify, we wait for everything to be added to our invoice before paying it?? Or do we pay the one we have now and there will be a separate invoice for everything else we request to add-on??
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run SaberBay DARKSABER season 3 finish now available (limited quantities) saberbay.com
- Thread starter Saberbay
- Start date
ManchegoVariant
Member
Will any weathered hilts ship out before you go on break?
at the risk of repeating another poster's question - is that the darkened/weathered hilt? I am still on the fence with that option, but whatever this one is - works for me
csworkshop
New Member
This to me looks like the unweathered, cant say for sure! but it feels more like the darkened option was a quick extra that saberbay did on their own accord rather than sending one out to TSTat the risk of repeating another poster's question - is that the darkened/weathered hilt? I am still on the fence with that option, but whatever this one is - works for me
csworkshop
New Member
Seem to remember seeing something about it being 28 inches long. TST will probably have to correct me on that
Oops, I went ahead and paid in full just after sending you the email about adding the darkening service.
Justin can you confirm that the correct battery terminal choice for the chassis is the Option 2 "Larger non spring negative"?
www.saberbay.com
18650 Removable Battery Contacts
Buy 18650 Removable Battery Contacts at the lowest price in United States. Check reviews and buy 18650 Removable Battery Contacts today.
www.saberbay.com
It looks like the first sandblasted prototype, which looks slightly darker than the final hilt.
One more question - and my noob is showing -- am I correct that the GOTH-3D crystal (addon #2) is a totally separate purchase.
Darth Ryo - do you have an installed photo of it? I'm having a hard time picturing this as an add on - but guessing it is a subtle touch, that just clips into the chamber?
www.shapeways.com
Darth Ryo - do you have an installed photo of it? I'm having a hard time picturing this as an add on - but guessing it is a subtle touch, that just clips into the chamber?
Saberbay Darksaber kit - Crystal Chamber Add-On 2 by Rick_D_Ryo on Shapeways
Check out Saberbay Darksaber kit - Crystal Chamber Add-On 2 by Rick_D_Ryo on Shapeways and discover more 3D printed products in Maker/DIY.
www.shapeways.com
Hey,
Wasn't following here sorry.
We where mostly waiting for the run to be closer to shipping to enable the metal add-on purchase on our shop.
All our testing is done anyway, so we'll probably add the item beginning next week
Here is a teaser:
View attachment 1606805
I'll let Saberbay post more pictures shortly.
We'll also post some stories and video on our insta starting tomorrow for those who won't to follow @goth_3designs
Ahhh... lol, that puts me right back on the fence lol. I can't tell if the darkened one is TOO dark, but the standard one is TOO light. This one sat right in the middle - just like my ability to make a decision
Yea I also want clarification On this, because in the email you asked us to email you if we want the weathering service, but in a previous message it was said if we leave the invoice open that the weathering service would just be added. Just a little confused on my end, sorry!!
No it’s our bad we were not clear and some of the notes still say pay in 7 days as pointed out
from an early sample that the grips were darkened
Not as nicely as the weathering but darkened never the less
yup was darker because they used “ dirty” media
Yes please wait for your weathering request to be added if you have an open invoice
I’m still going thru all the messages and questions in order of recovery thru justin@saberbay.com
If you paid before us adding, no biggie we can send you a payment link
SpectreII
New Member
If we are ordering parts for the install from you, can these be combined to ship in one box? I don't want to make things more complicated for you but also feel one box might be easier for both parties rather than multiple? Apologies if this has already been asked, but I don't remember seeing anything about it previously.
Edit: One more additional question about parts: Is there any way to get a hold of the STL file for the crystal? Even if there is a smaller fee for the file, I'd rather have control over my own print than order it already printed. Double edit (last one, I promise!): This might be a moot point if the crystal came with the orders for the chambers. I can't remember if that was the case or not ...
Edit: One more additional question about parts: Is there any way to get a hold of the STL file for the crystal? Even if there is a smaller fee for the file, I'd rather have control over my own print than order it already printed. Double edit (last one, I promise!): This might be a moot point if the crystal came with the orders for the chambers. I can't remember if that was the case or not ...
Last edited:
The parts ship from Shan in California. They ship from a different location so that's not possible.
There is too many moving parts to offer that even for international customer unless they already had them shipped to me
We never imagined we would weathering over half these and also have to sand to fit the blade stems to the sleevs, but tolerances are tight for a reason and sometime that happens
Those who ordered a chamber on the group buy are getting the crystal.
I don't think Goth offers his stls, you need to order them from shapeways or his other partners
We never said that If we left it open we would just add the service( that would be rude to make you pay 40$ for something you didnt ask for" .
We said we would resume with the order as usual if we didn't get a reply to request the service.
I need a final tally by tomorrow night for those who want the grip weathering because I need to start the work and the fulfillment to get some orders out before I am travelling from the 23rd- 7th of feb.
In short if you paid in full and you want the grips weathered/darkened email us "this is the grey" with your paypal email and or invoice number.
If you have an open invoice and you want the grips weathered/darkened email us "this is the grey" with your paypal email and or invoice number
By tomorrow night please and thank you =D
I just replied to 120 email, adjusted 80 invoices and drank 3 beers....
I am clocking out and hitting they hay!
Thank you everyone, I dont deserve the patience and kindness you have been showing
Last edited:
ObiWanJacobi
New Member
Invoice paymentcompleted, ready to go
So excited to receive my Darksaber!!!
So excited to receive my Darksaber!!!
CRAP I AM SO SORRY! I just sent my email right now as I have been at work all day… Thank you so much for the help and updates I am so excited!
By chance is there going to be a more detailed, build guide the one that was posted previously by goth seems a little lacking as I was trying to figure out exactly what all I would need to order, and if I needed the accent LEDs to illuminate the buttons, but I couldn’t tell
enterprise0216
Sr Member
Just replied to email Justin damn junk folder My response is several days late dang it.
My response is several days late dang it.Similar threads
