Limited Run RUN CLOSED * DL-44 ESB Blaster Machined Parts Set * RUN CLOSED

[thd9791]

The ANH sounds a little louder than the ESB, is that because of the fh differences?

 

[Dann]

Or is the ESB a 9, and the ANH a 7.63?

 

[scottjua]

Both are 7.63 but the anh is shooting slightly hotter loads

 

[Dann]

Aha! Well, there you go. They're both bad as hail!

 

[thd9791]

Yea Hail sucks man.. put dents in the hood of my car and everything

 

[Boba Debt]

You should try loading them with rifle gun powder. It burns slower so you will get a huge fire flash out the front of the muzzle.

If you don't know the proper way to do this I would leave it to the pros.

 

[2keepandbear]

You should try loading them with rifle gun powder. It burns slower so you will get a huge fire flash out the front of the muzzle.

If you don't know the proper way to do this I would leave it to the pros.

Depends on the powder. And rifle powder would generally up the pressure to a point making it completely unsafe. That being said... powders such as Power Pistol, Blue Dot, and H110 will give you VERY NICE muzzle flashes and are designed for handguns... the first two especially for 9mm ;-) Since I don't load the 7.63, I am not entirely sure which powder would suffice. with H110, I get a muzzle flash out of my 4" .357 about the size of a watermelon.

 

[Ham Solo]

That was awesome, scottjua! Thanks for sharing.

 

[Boba Debt]

I have received the scope bracket disks and scope bracket spacers:






The white spots on the anodized Bespin disk are photographic defects, not imperfections in the finish




Think Jedi has received the last batch of scopes so the raw brass parts will be shipped in a couple days

I bought and received the scope lenses and I have shipped my real scope with the lenses to the machine shop and they are going to determine if the factory bolt spacing will work for the replica scopes. If it will they, will put the scope brackets into the production queue.

The scopes will follow the brackets and then the Mausers will be machined.


This has been a long journey but I see the finish line in on the horizon


PS : I know that was a very corny thing to say

 

[matty matt]

Thank you so much for this. They look great. Can you ship me my Bespin disk asap? I'm anxious to finish up my project.

 

[3oin]

Looks really good

 

[Boba Debt]

Thank you so much for this. They look great. Can you ship me my Bespin disk asap? I'm anxious to finish up my project.

Email me about this and I'll ship it

 

[newmagrathea]

Man, those look great. I'm really excited. What are some of the ways we can weather anodized aluminum? I was thinking steel wool and a file.

 

[Reel Fakes]

Looking good!

 

[Demetrius]

Cannot wait for these to ship. Would it be too late to order a scope bracket? and a Bespin spacer as well?

 

[Solos blaster]

Pardon my ignorance but what is the ring in the upper left? It isn't the inner ring for the scope.

Parts look great by the way, I can't wait to put this together!

 

[Boba Debt]

Cannot wait for these to ship. Would it be too late to order a scope bracket? and a Bespin spacer as well?

It depends on which version you want.

Email me with your info and I will see if I can work it in.

Pardon my ignorance but what is the ring in the upper left? It isn't the inner ring for the scope.

Parts look great by the way, I can't wait to put this together!

That is the Hoth Scope Bracket Spacer Ring.

Originally I was going to do a solid spacer with 3 holes that matched the Thorne's disk replica but it cost twice as much to manufacture them that way due to the number of set ups required.

So I came up with a simpler version to keep the Hoth Kit price comparable to the Bespin Kit Price

 

[Solos blaster]

Ok, that makes much more sense, thanks:thumbsup

 

[Boba Debt]

The scope brackets are on the production schedule and should be complete is 2-3 weeks

 

[Reel Fakes]

Nice! So, the hole spacing wasn't an issue?

The scope brackets are on the production schedule and should be complete is 2-3 weeks